[igt-dev] [PATCH i-g-t v10 4/4] tests/kms_ccs: CCS Clear Color test
Kahola, Mika
mika.kahola at intel.com
Fri Nov 20 11:56:54 UTC 2020
> -----Original Message-----
> From: Imre Deak <imre.deak at intel.com>
> Sent: Friday, November 20, 2020 1:53 PM
> To: Kahola, Mika <mika.kahola at intel.com>
> Cc: igt-dev at lists.freedesktop.org
> Subject: Re: [PATCH i-g-t v10 4/4] tests/kms_ccs: CCS Clear Color test
>
> On Fri, Nov 20, 2020 at 11:36:46AM +0200, Mika Kahola wrote:
> > The patch proposes a method to test CCS with clear color capability.
> >
> > The test paints a solid color on primary fb and a small sprite fb.
> > These are cleared with fast clear feature. A crc is captured and
> > compared against the reference.
> >
> > v2: Modify _gen9_render_copyfunc to support fast clear (Matt)
> > Enable fast clear bit on 3D sequence (Matt)
> > Add helper function to figure out clear color modifier (Matt)
> > v3: Remove unrelated line additions/removes
> > v4: Fast clear with color (Imre)
> > v5: Write raw 32-bit color values to register (Imre)
> > Require 32-bit color format
> > v6: Rebase to use batchbuffer without libdrm dependency
> > v7: Enable clear color (Nanley)
> > v8: Various cleanups (Imre)
> > v9: Splitting patch for smaller hunks (Imre)
> > v10: Remove switch from CCS CC modifier check (Imre)
> > Color map conversion (Imre)
> > Separate function to check CCS CC plane (Imre)
> > Removed left-over comment (Imre)
> > Replace inte_bb_reset() with intel_bb_sync() and
> > intel_bb_destroy() when cleaning up (Imre)
> > Fix logic to test CCS clear color only with
> > XRGB8888 format (Imre)
> > Move fast clear to it's own function (Imre)
> >
> > Signed-off-by: Mika Kahola <mika.kahola at intel.com>
> > ---
> > tests/kms_ccs.c | 75
> > +++++++++++++++++++++++++++++++++++++++++++++----
> > 1 file changed, 69 insertions(+), 6 deletions(-)
> >
> > diff --git a/tests/kms_ccs.c b/tests/kms_ccs.c index
> > 53abecce..8c2d7b3d 100644
> > --- a/tests/kms_ccs.c
> > +++ b/tests/kms_ccs.c
> > @@ -120,6 +120,11 @@ static void addfb_init(struct igt_fb *fb, struct
> drm_mode_fb_cmd2 *f)
> > }
> > }
> >
> > +static bool is_ccs_cc_modifier(uint64_t modifier) {
> > + return modifier ==
> LOCAL_I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC;
> > +}
> > +
> > /*
> > * The CCS planes of compressed framebuffers contain non-zero bytes if
> the
> > * engine compressed effectively the framebuffer. The actual encoding
> > of these @@ -155,7 +160,36 @@ static void check_ccs_plane(int drm_fd,
> igt_fb_t *fb, int plane)
> > plane, igt_fb_ccs_to_main_plane(fb, plane)); }
> >
> > -static void check_all_ccs_planes(int drm_fd, igt_fb_t *fb)
> > +static void check_ccs_cc_plane(int drm_fd, igt_fb_t *fb, int plane,
> > +const float *cc_color) {
> > + union cc {
> > + float f;
> > + uint32_t d;
> > + } *cc_p;
> > + void *map;
> > + uint32_t native_color;
> > +
> > + gem_set_domain(drm_fd, fb->gem_handle,
> I915_GEM_DOMAIN_CPU, 0);
> > +
> > + map = gem_mmap__cpu(drm_fd, fb->gem_handle, 0, fb->size,
> PROT_READ);
> > + cc_p = map + fb->offsets[plane];
> > +
> > + igt_assert(cc_color[0] == cc_p[0].f &&
> > + cc_color[1] == cc_p[1].f &&
> > + cc_color[2] == cc_p[2].f &&
> > + cc_color[3] == cc_p[3].f);
> > +
> > + native_color = (uint8_t)(cc_color[3] * 0xff) << 24 |
> > + (uint8_t)(cc_color[0] * 0xff) << 16 |
> > + (uint8_t)(cc_color[1] * 0xff) << 8 |
> > + (uint8_t)(cc_color[2] * 0xff);
> > +
> > + igt_assert(native_color == cc_p[4].d);
> > +
> > + munmap(map, fb->size);
> > +};
> > +
> > +static void check_all_ccs_planes(int drm_fd, igt_fb_t *fb, const
> > +float *cc_color)
> > {
> > int i;
> >
> > @@ -163,6 +197,8 @@ static void check_all_ccs_planes(int drm_fd,
> igt_fb_t *fb)
> > if (igt_fb_is_ccs_plane(fb, i) &&
> > !igt_fb_is_gen12_ccs_cc_plane(fb, i))
> > check_ccs_plane(drm_fd, fb, i);
> > + else if (igt_fb_is_gen12_ccs_cc_plane(fb, i))
> > + check_ccs_cc_plane(drm_fd, fb, i, cc_color);
> > }
> > }
> >
> > @@ -176,6 +212,24 @@ static int get_ccs_plane_index(uint32_t format)
> > return index;
> > }
> >
> > +static void fast_clear_fb(int drm_fd, struct igt_fb *fb, const float
> > +*cc_color) {
> > + igt_render_clearfunc_t fast_clear =
> igt_get_render_clearfunc(intel_get_drm_devid(drm_fd));
> > + struct intel_bb *ibb = intel_bb_create(drm_fd, 4096);
> > + struct buf_ops *bops = buf_ops_create(drm_fd);
> > + struct intel_buf *dst = igt_fb_create_intel_buf(drm_fd, bops, fb,
> > +"fast clear dst");
> > +
> > + gem_set_domain(drm_fd, fb->gem_handle,
> > + I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
> > +
> > + fast_clear(ibb, dst, 0, 0, fb->width, fb->height, cc_color);
> > +
> > + intel_bb_sync(ibb);
> > + intel_bb_destroy(ibb);
> > + intel_buf_destroy(dst);
> > + buf_ops_destroy(bops);
> > +}
> > +
> > static void generate_fb(data_t *data, struct igt_fb *fb,
> > int width, int height,
> > enum test_fb_flags fb_flags)
> > @@ -186,6 +240,7 @@ static void generate_fb(data_t *data, struct igt_fb
> *fb,
> > cairo_t *cr;
> > int index;
> > int ret;
> > + const float cc_color[4] = {colors[0].r, colors[0].g, colors[0].b,
> > +1.0};
>
> this needs to match the reference FB color, which is different in the sprite
> subtests: colors[!!data->plane]
>
> >
> > /* Use either compressed or Y-tiled to test. However, given the lack
> of
> > * available bandwidth, we use linear for the primary plane when
> @@
> > -246,10 +301,14 @@ static void generate_fb(data_t *data, struct igt_fb *fb,
> > if (!(data->flags & TEST_BAD_PIXEL_FORMAT)) {
> > int c = !!data->plane;
> >
> > - cr = igt_get_cairo_ctx(data->drm_fd, fb);
> > - igt_paint_color(cr, 0, 0, width, height,
> > - colors[c].r, colors[c].g, colors[c].b);
> > - igt_put_cairo_ctx(cr);
> > + if (is_ccs_cc_modifier(modifier)) {
> > + fast_clear_fb(data->drm_fd, fb, cc_color);
> > + } else {
> > + cr = igt_get_cairo_ctx(data->drm_fd, fb);
> > + igt_paint_color(cr, 0, 0, width, height,
> > + colors[c].r, colors[c].g, colors[c].b);
> > + igt_put_cairo_ctx(cr);
> > + }
> > }
> >
> > ret = drmIoctl(data->drm_fd, LOCAL_DRM_IOCTL_MODE_ADDFB2,
> &f); @@
> > -261,7 +320,7 @@ static void generate_fb(data_t *data, struct igt_fb *fb,
> > igt_assert_eq(ret, 0);
> >
> > if (check_ccs_planes)
> > - check_all_ccs_planes(data->drm_fd, fb);
> > + check_all_ccs_planes(data->drm_fd, fb, cc_color);
> >
> > fb->fb_id = f.fb_id;
> > }
> > @@ -349,6 +408,10 @@ static bool try_config(data_t *data, enum
> test_fb_flags fb_flags,
> > if (data->flags & TEST_BAD_ROTATION_90)
> > igt_plane_set_rotation(primary, IGT_ROTATION_90);
> >
> > + if (is_ccs_cc_modifier(data->ccs_modifier)
> > + && data->format != DRM_FORMAT_XRGB8888)
> > + return false;
>
> this should be checked early after igt_plane_has_format_mod() to avoid the
> overhead up to this point. Also codying style is && at the end of line.
>
> With the above fixed, looks ok:
> Reviewed-by: Imre Deak <imre.deak at intel.com>
Thanks for the review! I will fix those two points.
Cheers,
Mika
>
> > +
> > ret = igt_display_try_commit2(display, commit);
> > if (data->flags & TEST_BAD_ROTATION_90) {
> > igt_assert_eq(ret, -EINVAL);
> > --
> > 2.25.1
> >
More information about the igt-dev
mailing list