[igt-dev] [PATCH i-g-t v3] tests/kms_big_joiner: Add test to validate big joiner

Karthik B S karthik.b.s at intel.com
Thu Oct 1 07:38:40 UTC 2020


Added negative test to verify the different scenarios for big joiner.
In the test, modeset is done on Pipe A for a big joiner mode and
a second modeset is attempted on Pipe B which is expected to fail.
Same functionality is validated for other pipes as well.

Secondly, the reverse is tested where a modeset is done on Pipe B
and then a second big joiner modeset is attempted on Pipe A which is
expected to fail. Same functionality is validated for other pipes as well.

v2: -Rename HDISPLAY_5K to MAX_HDISPLAY_PER_PIPE. (Manasi)
    -Do not assume mode[0] will be the highest mode.
     Loop through the mode list to find the 8k mode. (Manasi)
    -Add a subtest for verifying basic 8k modeset on all pipes. (Manasi)

v3: -Add break after big joiner output is found in basic subtest. (Manasi)
    -Fix the clean up part in the invalid-modeset subtest.

Signed-off-by: Karthik B S <karthik.b.s at intel.com>
---
 tests/Makefile.sources |   1 +
 tests/kms_big_joiner.c | 257 +++++++++++++++++++++++++++++++++++++++++
 tests/meson.build      |   1 +
 3 files changed, 259 insertions(+)
 create mode 100644 tests/kms_big_joiner.c

diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index f32ea9cf..f59ac150 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -38,6 +38,7 @@ TESTS_progs = \
 	kms_atomic_transition \
 	kms_available_modes_crc \
 	kms_big_fb \
+	kms_big_joiner \
 	kms_busy \
 	kms_ccs \
 	kms_concurrent \
diff --git a/tests/kms_big_joiner.c b/tests/kms_big_joiner.c
new file mode 100644
index 00000000..58171ce8
--- /dev/null
+++ b/tests/kms_big_joiner.c
@@ -0,0 +1,257 @@
+/*
+ * Copyright © 2020 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Author:
+ *  Karthik B S <karthik.b.s at intel.com>
+ */
+
+#include "igt.h"
+
+#define MAX_HDISPLAY_PER_PIPE 5120
+
+IGT_TEST_DESCRIPTION("Test big joiner");
+
+typedef struct {
+	int drm_fd;
+	igt_display_t display;
+	struct igt_fb fb;
+	int mode_number;
+	int n_pipes;
+	uint32_t big_joiner_output_id;
+} data_t;
+
+static void test_invalid_modeset(data_t *data)
+{
+	drmModeModeInfo *mode;
+	igt_display_t *display = &data->display;
+	igt_output_t *output, *big_joiner_output = NULL, *second_output = NULL;
+	int width = 0, height = 0, i, ret;
+	igt_pipe_t *pipe;
+	igt_plane_t *plane;
+
+	for_each_connected_output(display, output) {
+		mode = &output->config.connector->modes[0];
+
+		if (data->big_joiner_output_id == output->id) {
+			mode = &output->config.connector->modes[data->mode_number];
+			big_joiner_output = output;
+		} else if (second_output == NULL) {
+			second_output = output;
+		}
+
+		width = max(width, mode->hdisplay);
+		height = max(height, mode->vdisplay);
+	}
+
+	igt_create_pattern_fb(data->drm_fd, width, height, DRM_FORMAT_XRGB8888,
+			      LOCAL_DRM_FORMAT_MOD_NONE, &data->fb);
+
+	for_each_pipe(display, i) {
+		if (i < (data->n_pipes - 1)) {
+			igt_output_set_pipe(big_joiner_output, i);
+
+			mode = &big_joiner_output->config.connector->modes[data->mode_number];
+			igt_output_override_mode(big_joiner_output, mode);
+
+			pipe = &display->pipes[i];
+			plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+			igt_plane_set_fb(plane, &data->fb);
+			igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+			igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+			igt_display_commit2(display, COMMIT_ATOMIC);
+
+			igt_output_set_pipe(second_output, i + 1);
+
+			mode = igt_output_get_mode(second_output);
+
+			pipe = &display->pipes[i + 1];
+			plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+			igt_plane_set_fb(plane, &data->fb);
+			igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+			igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+			/* This commit is expectd to fail as this pipe is being used for big joiner */
+			ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
+							    DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+			igt_assert_lt(ret, 0);
+
+			igt_output_set_pipe(big_joiner_output, PIPE_NONE);
+			igt_output_set_pipe(second_output, PIPE_NONE);
+
+			pipe = &display->pipes[i];
+			plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+			igt_plane_set_fb(plane, NULL);
+			igt_display_commit2(display, COMMIT_ATOMIC);
+			igt_output_override_mode(big_joiner_output, NULL);
+		}
+	}
+
+	for_each_pipe(display, i) {
+		if (i < (data->n_pipes - 1)) {
+			igt_output_set_pipe(second_output, i + 1);
+
+			mode = igt_output_get_mode(second_output);
+
+			pipe = &display->pipes[i + 1];
+			plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+			igt_plane_set_fb(plane, &data->fb);
+			igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+			igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+			igt_display_commit2(display, COMMIT_ATOMIC);
+
+			igt_output_set_pipe(big_joiner_output, i);
+
+			mode = &big_joiner_output->config.connector->modes[data->mode_number];
+			igt_output_override_mode(big_joiner_output, mode);
+
+			pipe = &display->pipes[i];
+			plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+			igt_plane_set_fb(plane, &data->fb);
+			igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+			igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+			/* This commit is expected to fail as the adjacent pipe is already in use*/
+			ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
+							    DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+			igt_assert_lt(ret, 0);
+
+			igt_output_set_pipe(big_joiner_output, PIPE_NONE);
+			igt_output_set_pipe(second_output, PIPE_NONE);
+			igt_plane_set_fb(plane, NULL);
+
+			pipe = &display->pipes[i + 1];
+			plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+			igt_plane_set_fb(plane, NULL);
+
+			igt_display_commit2(display, COMMIT_ATOMIC);
+
+			igt_output_override_mode(big_joiner_output, NULL);
+		}
+	}
+
+	igt_remove_fb(data->drm_fd, &data->fb);
+}
+
+static void test_basic_modeset(data_t *data)
+{
+	drmModeModeInfo *mode;
+	igt_output_t *output, *big_joiner_output = NULL;
+	igt_display_t *display = &data->display;
+	int width = 0, height = 0, i;
+	igt_pipe_t *pipe;
+	igt_plane_t *plane;
+
+	for_each_connected_output(display, output) {
+		if (data->big_joiner_output_id == output->id) {
+			mode = &output->config.connector->modes[data->mode_number];
+			big_joiner_output = output;
+			width = mode->hdisplay;
+			height = mode->vdisplay;
+			break;
+		}
+	}
+
+	igt_create_pattern_fb(data->drm_fd, width, height, DRM_FORMAT_XRGB8888,
+			      LOCAL_DRM_FORMAT_MOD_NONE, &data->fb);
+
+	for_each_pipe(display, i) {
+		if (i < (data->n_pipes - 1)) {
+			igt_output_set_pipe(big_joiner_output, i);
+
+			mode = &big_joiner_output->config.connector->modes[data->mode_number];
+			igt_output_override_mode(big_joiner_output, mode);
+
+			pipe = &display->pipes[i];
+			plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+
+			igt_plane_set_fb(plane, &data->fb);
+			igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+			igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+
+			igt_display_commit2(display, COMMIT_ATOMIC);
+
+			igt_output_set_pipe(big_joiner_output, PIPE_NONE);
+			igt_plane_set_fb(plane, NULL);
+			igt_display_commit2(display, COMMIT_ATOMIC);
+		}
+	}
+
+	igt_remove_fb(data->drm_fd, &data->fb);
+}
+
+igt_main
+{
+	data_t data;
+	bool big_joiner_mode_found = false;
+	igt_output_t *output;
+	drmModeModeInfo *mode;
+	int valid_output = 0, i;
+
+	igt_fixture {
+		data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+		kmstest_set_vt_graphics_mode();
+
+		igt_display_require(&data.display, data.drm_fd);
+
+		for_each_connected_output(&data.display, output) {
+			if (!big_joiner_mode_found) {
+				for (i = 0; i < output->config.connector->count_modes; i++) {
+					mode = &output->config.connector->modes[i];
+					if (mode->hdisplay > MAX_HDISPLAY_PER_PIPE) {
+						big_joiner_mode_found = true;
+						data.mode_number = i;
+						data.big_joiner_output_id = output->id;
+						break;
+					}
+				}
+			}
+			valid_output++;
+		}
+
+		data.n_pipes = 0;
+		for_each_pipe(&data.display, i)
+			data.n_pipes++;
+
+		igt_require_f(big_joiner_mode_found, "No output with 5k+ mode found\n");
+	}
+
+	igt_describe("Verify the basic modeset on big joiner mode on all pipes");
+	igt_subtest("basic")
+		test_basic_modeset(&data);
+
+	igt_describe("Verify if the modeset on the adjoining pipe is rejected "
+		     "when the pipe is active with a big joiner modeset");
+	igt_subtest("invalid-modeset") {
+		igt_require_f(valid_output > 1, "No valid Second output found\n");
+		test_invalid_modeset(&data);
+	}
+
+	igt_fixture
+		igt_display_fini(&data.display);
+}
diff --git a/tests/meson.build b/tests/meson.build
index 32f011e9..aea7d7f8 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -22,6 +22,7 @@ test_progs = [
 	'kms_atomic_transition',
 	'kms_available_modes_crc',
 	'kms_big_fb',
+	'kms_big_joiner' ,
 	'kms_busy',
 	'kms_ccs',
 	'kms_concurrent',
-- 
2.22.0



More information about the igt-dev mailing list