[igt-dev] [PATCH i-g-t v2] tests/kms_cursor_crc: refactoring cursor-alpha subtests
Melissa Wen
melissa.srw at gmail.com
Wed Oct 21 16:57:27 UTC 2020
Hey,
I saw that the CI reported a failure again for alpha = 0.5.
Could it be a rounding issue?
Melissa Wen
On Wed, Oct 21, 2020 at 6:00 AM Melissa Wen <melissa.srw at gmail.com> wrote:
>
> Considering just a fully opaque or fully transparent cursor is not enough
> to check the composition of an ARGB cursor plane. For example, the cairo
> ARGB32 format uses pre-multiplied alpha, and this representation may only
> be evident when testing a translucent cursor.
>
> Therefore, this patch refactors the cursor-alpha-opaque and
> cursor-alpha-transparent subtests into just one subtest (cursor-alpha)
> that checks the alpha blending of a white cursor, with different alpha
> values, in the primary plane. This refactoring also generates some setup
> stuffs savings.
>
> v2:
> - debug log states the alpha whenever CRC mismatch (Arek)
> - checking all alpha values before asserting the result (Arek)
>
> Signed-off-by: Melissa Wen <melissa.srw at gmail.com>
> ---
> tests/kms_cursor_crc.c | 87 ++++++++++++++++++++++--------------------
> 1 file changed, 45 insertions(+), 42 deletions(-)
>
> diff --git a/tests/kms_cursor_crc.c b/tests/kms_cursor_crc.c
> index 0be8f7f8..83c74a69 100644
> --- a/tests/kms_cursor_crc.c
> +++ b/tests/kms_cursor_crc.c
> @@ -428,65 +428,73 @@ static void prepare_crtc(data_t *data, igt_output_t *output,
> igt_pipe_crc_start(data->pipe_crc);
> }
>
> -static void test_cursor_alpha(data_t *data, double a)
> +static void test_cursor_alpha(data_t *data)
> {
> igt_display_t *display = &data->display;
> igt_pipe_crc_t *pipe_crc = data->pipe_crc;
> - igt_crc_t crc, ref_crc;
> + igt_crc_t crc[5], ref_crc;
> cairo_t *cr;
> uint32_t fb_id;
> int curw = data->curw;
> int curh = data->curh;
> + int i, index;
> + double alpha;
> + bool mismatch = false;
>
> - /* Alpha cursor fb with white color */
> + /* Alpha cursor fb */
> fb_id = igt_create_fb(data->drm_fd, curw, curh,
> DRM_FORMAT_ARGB8888,
> LOCAL_DRM_FORMAT_MOD_NONE,
> &data->fb);
> igt_assert(fb_id);
> +
> + /*
> + * Hardware Test
> + * With the cursor enabled, get the PF CRCs from the composition with a
> + * white cursor with different alpha values.
> + */
> cr = igt_get_cairo_ctx(data->drm_fd, &data->fb);
> - igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, a);
> - igt_put_cairo_ctx(cr);
> + cairo_set_operator (cr, CAIRO_OPERATOR_SOURCE);
>
> - /* Hardware Test - enable cursor and get PF CRC */
> cursor_enable(data);
> - igt_display_commit(display);
> - igt_wait_for_vblank(data->drm_fd,
> - display->pipes[data->pipe].crtc_offset);
> - igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &crc);
> + for (i = 0, alpha = 1.0; alpha >= 0.0; alpha -= 0.25, i++) {
> + igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, alpha);
> +
> + igt_display_commit(display);
> + igt_wait_for_vblank(data->drm_fd,
> + display->pipes[data->pipe].crtc_offset);
> + igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &crc[i]);
> + }
> + igt_put_cairo_ctx(cr);
>
> cursor_disable(data);
> igt_remove_fb(data->drm_fd, &data->fb);
>
> - /* Software Test - render cursor in software, drawn it directly on PF */
> + /* Software Test - render cursor in software, drawn it directly on PF*/
> cr = igt_get_cairo_ctx(data->drm_fd, &data->primary_fb[FRONTBUFFER]);
> - igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, a);
> - igt_put_cairo_ctx(cr);
> -
> - igt_display_commit(display);
> - igt_wait_for_vblank(data->drm_fd,
> - display->pipes[data->pipe].crtc_offset);
> - igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &ref_crc);
>
> - /* Compare CRC from Hardware/Software tests */
> - igt_assert_crc_equal(&crc, &ref_crc);
> + for (i = 0, alpha = 1.0; alpha >= 0.0; alpha -= 0.25, i++) {
> + igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, alpha);
>
> - /*Clear Screen*/
> - cr = igt_get_cairo_ctx(data->drm_fd, &data->primary_fb[FRONTBUFFER]);
> - igt_paint_color(cr, 0, 0, data->screenw, data->screenh,
> - 0.0, 0.0, 0.0);
> - igt_put_cairo_ctx(cr);
> -}
> + igt_display_commit(display);
> + igt_wait_for_vblank(data->drm_fd,
> + display->pipes[data->pipe].crtc_offset);
> + igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &ref_crc);
>
> -static void test_cursor_transparent(data_t *data)
> -{
> - test_cursor_alpha(data, 0.0);
> + /* Compare CRC from Hardware/Software tests */
> + if (igt_find_crc_mismatch(&crc[i], &ref_crc, &index)) {
> + mismatch = true;
> + igt_debug("CRC mismatch for alpha %.2f: 0x%x != 0x%x\n",
> + alpha, crc[i].crc[index], ref_crc.crc[index]);
> + }
>
> -}
> + /*Clear Screen*/
> + igt_paint_color(cr, 0, 0, data->screenw, data->screenh,
> + 0.0, 0.0, 0.0);
> + }
> + igt_put_cairo_ctx(cr);
>
> -static void test_cursor_opaque(data_t *data)
> -{
> - test_cursor_alpha(data, 1.0);
> + igt_assert_f(!mismatch, "At least one CRC mismatch detected\n");
> }
>
> static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, int cursor_h)
> @@ -655,15 +663,10 @@ static void run_tests_on_pipe(data_t *data, enum pipe pipe)
> run_test(data, test_cursor_size,
> data->cursor_max_w, data->cursor_max_h);
>
> - igt_describe("Validates the composition of a fully opaque cursor "
> - "plane, i.e., alpha channel equal to 1.0.");
> - igt_subtest_f("pipe-%s-cursor-alpha-opaque", kmstest_pipe_name(pipe))
> - run_test(data, test_cursor_opaque, data->cursor_max_w, data->cursor_max_h);
> -
> - igt_describe("Validates the composition of a fully transparent cursor "
> - "plane, i.e., alpha channel equal to 0.0.");
> - igt_subtest_f("pipe-%s-cursor-alpha-transparent", kmstest_pipe_name(pipe))
> - run_test(data, test_cursor_transparent, data->cursor_max_w, data->cursor_max_h);
> + igt_describe("Validates the composition of alpha cursor plane "
> + "from fully opaque to fully transparent alpha range");
> + igt_subtest_f("pipe-%s-cursor-alpha", kmstest_pipe_name(pipe))
> + run_test(data, test_cursor_alpha, data->cursor_max_w, data->cursor_max_h);
>
> igt_fixture
> create_cursor_fb(data, data->cursor_max_w, data->cursor_max_h);
> --
> 2.28.0
>
More information about the igt-dev
mailing list