[igt-dev] [PATCH i-g-t v2] tests/kms_cursor_crc: refactoring cursor-alpha subtests
Juha-Pekka Heikkila
juhapekka.heikkila at gmail.com
Thu Oct 22 13:41:50 UTC 2020
On 22.10.2020 13.37, Ville Syrjälä wrote:
> On Wed, Oct 21, 2020 at 05:59:56AM -0300, Melissa Wen wrote:
>> Considering just a fully opaque or fully transparent cursor is not enough
>> to check the composition of an ARGB cursor plane. For example, the cairo
>> ARGB32 format uses pre-multiplied alpha, and this representation may only
>> be evident when testing a translucent cursor.
>>
>> Therefore, this patch refactors the cursor-alpha-opaque and
>> cursor-alpha-transparent subtests into just one subtest (cursor-alpha)
>> that checks the alpha blending of a white cursor, with different alpha
>> values, in the primary plane. This refactoring also generates some setup
>> stuffs savings.
>
> Black background means you can't actually tell the
> difference between premultiplied blending and no
> blending.
>
> Oh, I guess restore_image() does end up painting
> the test pattern into the primary plane's fb? Are
> we guaranteed to position the cursor over some non-black
> parts?
>
> The other obvious concern is whether hardware and software
> blending will produce the exact same results or not. I do see
> you use 1/4 steps for the alpha, which I guess can make that
> more likely.
I don't think verifying those blending levels will be possible when
comparing hw vs sw image, to me it seemed different gens behave
different with cursor alpha. On this test to make it fail reliably even
with alpha value 1.0 one just need to change from cursor image white sub
block into grey level 0.5.
>
> Side note: data->primary_fb[RESTOREBUFFER] looks to be dead weight
Seems it was left when rendercopy was taken out from this test.
>
>>
>> v2:
>> - debug log states the alpha whenever CRC mismatch (Arek)
>> - checking all alpha values before asserting the result (Arek)
>>
>> Signed-off-by: Melissa Wen <melissa.srw at gmail.com>
>> ---
>> tests/kms_cursor_crc.c | 87 ++++++++++++++++++++++--------------------
>> 1 file changed, 45 insertions(+), 42 deletions(-)
>>
>> diff --git a/tests/kms_cursor_crc.c b/tests/kms_cursor_crc.c
>> index 0be8f7f8..83c74a69 100644
>> --- a/tests/kms_cursor_crc.c
>> +++ b/tests/kms_cursor_crc.c
>> @@ -428,65 +428,73 @@ static void prepare_crtc(data_t *data, igt_output_t *output,
>> igt_pipe_crc_start(data->pipe_crc);
>> }
>>
>> -static void test_cursor_alpha(data_t *data, double a)
>> +static void test_cursor_alpha(data_t *data)
>> {
>> igt_display_t *display = &data->display;
>> igt_pipe_crc_t *pipe_crc = data->pipe_crc;
>> - igt_crc_t crc, ref_crc;
>> + igt_crc_t crc[5], ref_crc;
>> cairo_t *cr;
>> uint32_t fb_id;
>> int curw = data->curw;
>> int curh = data->curh;
>> + int i, index;
>> + double alpha;
>> + bool mismatch = false;
>>
>> - /* Alpha cursor fb with white color */
>> + /* Alpha cursor fb */
>> fb_id = igt_create_fb(data->drm_fd, curw, curh,
>> DRM_FORMAT_ARGB8888,
>> LOCAL_DRM_FORMAT_MOD_NONE,
>> &data->fb);
>> igt_assert(fb_id);
>> +
>> + /*
>> + * Hardware Test
>> + * With the cursor enabled, get the PF CRCs from the composition with a
>> + * white cursor with different alpha values.
>> + */
>> cr = igt_get_cairo_ctx(data->drm_fd, &data->fb);
>> - igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, a);
>> - igt_put_cairo_ctx(cr);
>> + cairo_set_operator (cr, CAIRO_OPERATOR_SOURCE);
>>
>> - /* Hardware Test - enable cursor and get PF CRC */
>> cursor_enable(data);
>> - igt_display_commit(display);
>> - igt_wait_for_vblank(data->drm_fd,
>> - display->pipes[data->pipe].crtc_offset);
>> - igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &crc);
>> + for (i = 0, alpha = 1.0; alpha >= 0.0; alpha -= 0.25, i++) {
>> + igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, alpha);
>> +
>> + igt_display_commit(display);
>> + igt_wait_for_vblank(data->drm_fd,
>> + display->pipes[data->pipe].crtc_offset);
>> + igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &crc[i]);
>> + }
>> + igt_put_cairo_ctx(cr);
>>
>> cursor_disable(data);
>> igt_remove_fb(data->drm_fd, &data->fb);
>>
>> - /* Software Test - render cursor in software, drawn it directly on PF */
>> + /* Software Test - render cursor in software, drawn it directly on PF*/
>> cr = igt_get_cairo_ctx(data->drm_fd, &data->primary_fb[FRONTBUFFER]);
>> - igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, a);
>> - igt_put_cairo_ctx(cr);
>> -
>> - igt_display_commit(display);
>> - igt_wait_for_vblank(data->drm_fd,
>> - display->pipes[data->pipe].crtc_offset);
>> - igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &ref_crc);
>>
>> - /* Compare CRC from Hardware/Software tests */
>> - igt_assert_crc_equal(&crc, &ref_crc);
>> + for (i = 0, alpha = 1.0; alpha >= 0.0; alpha -= 0.25, i++) {
>> + igt_paint_color_alpha(cr, 0, 0, curw, curh, 1.0, 1.0, 1.0, alpha);
>>
>> - /*Clear Screen*/
>> - cr = igt_get_cairo_ctx(data->drm_fd, &data->primary_fb[FRONTBUFFER]);
>> - igt_paint_color(cr, 0, 0, data->screenw, data->screenh,
>> - 0.0, 0.0, 0.0);
>> - igt_put_cairo_ctx(cr);
>> -}
>> + igt_display_commit(display);
>> + igt_wait_for_vblank(data->drm_fd,
>> + display->pipes[data->pipe].crtc_offset);
>> + igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &ref_crc);
>>
>> -static void test_cursor_transparent(data_t *data)
>> -{
>> - test_cursor_alpha(data, 0.0);
>> + /* Compare CRC from Hardware/Software tests */
>> + if (igt_find_crc_mismatch(&crc[i], &ref_crc, &index)) {
>> + mismatch = true;
>> + igt_debug("CRC mismatch for alpha %.2f: 0x%x != 0x%x\n",
>> + alpha, crc[i].crc[index], ref_crc.crc[index]);
>> + }
>>
>> -}
>> + /*Clear Screen*/
>> + igt_paint_color(cr, 0, 0, data->screenw, data->screenh,
>> + 0.0, 0.0, 0.0);
>> + }
>> + igt_put_cairo_ctx(cr);
>>
>> -static void test_cursor_opaque(data_t *data)
>> -{
>> - test_cursor_alpha(data, 1.0);
>> + igt_assert_f(!mismatch, "At least one CRC mismatch detected\n");
>> }
>>
>> static void run_test(data_t *data, void (*testfunc)(data_t *), int cursor_w, int cursor_h)
>> @@ -655,15 +663,10 @@ static void run_tests_on_pipe(data_t *data, enum pipe pipe)
>> run_test(data, test_cursor_size,
>> data->cursor_max_w, data->cursor_max_h);
>>
>> - igt_describe("Validates the composition of a fully opaque cursor "
>> - "plane, i.e., alpha channel equal to 1.0.");
>> - igt_subtest_f("pipe-%s-cursor-alpha-opaque", kmstest_pipe_name(pipe))
>> - run_test(data, test_cursor_opaque, data->cursor_max_w, data->cursor_max_h);
>> -
>> - igt_describe("Validates the composition of a fully transparent cursor "
>> - "plane, i.e., alpha channel equal to 0.0.");
>> - igt_subtest_f("pipe-%s-cursor-alpha-transparent", kmstest_pipe_name(pipe))
>> - run_test(data, test_cursor_transparent, data->cursor_max_w, data->cursor_max_h);
>> + igt_describe("Validates the composition of alpha cursor plane "
>> + "from fully opaque to fully transparent alpha range");
>> + igt_subtest_f("pipe-%s-cursor-alpha", kmstest_pipe_name(pipe))
>> + run_test(data, test_cursor_alpha, data->cursor_max_w, data->cursor_max_h);
>>
>> igt_fixture
>> create_cursor_fb(data, data->cursor_max_w, data->cursor_max_h);
>> --
>> 2.28.0
>>
>> _______________________________________________
>> igt-dev mailing list
>> igt-dev at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/igt-dev
>
More information about the igt-dev
mailing list