[igt-dev] [PATCH i-g-t 5/5] tools: add support for msm_dp_compliance to IGT
Abhinav Kumar
abhinavk at codeaurora.org
Fri Sep 4 00:54:39 UTC 2020
Add support for msm_dp_compliance to igt tools to validate
video pattern DP compliance tests on MSM chipsets.
Signed-off-by: Abhinav Kumar <abhinavk at codeaurora.org>
---
tools/Makefile.am | 4 +
tools/Makefile.sources | 6 +
tools/meson.build | 12 +
tools/msm_dp_compliance.c | 812 ++++++++++++++++++++++++++++++++++++++
4 files changed, 834 insertions(+)
create mode 100644 tools/msm_dp_compliance.c
diff --git a/tools/Makefile.am b/tools/Makefile.am
index f97f9e08..eac52be8 100644
--- a/tools/Makefile.am
+++ b/tools/Makefile.am
@@ -14,6 +14,10 @@ intel_dp_compliance_LDADD = $(top_builddir)/lib/libintel_tools.la
bin_PROGRAMS += amd_hdmi_compliance
amd_hdmi_compliance_CFLAGS = $(AM_CFLAGS) $(GLIB_CFLAGS)
+bin_PROGRAMS += msm_dp_compliance
+msm_dp_compliance_CFLAGS = $(AM_CFLAGS) $(GLIB_CFLAGS)
+msm_dp_compliance_LDADD = $(top_builddir)/lib/libintel_tools.la
+
SUBDIRS = i915-perf null_state_gen registers
AM_CPPFLAGS = -I$(top_srcdir) -I$(top_srcdir)/include/drm-uapi -I$(top_srcdir)/lib \
diff --git a/tools/Makefile.sources b/tools/Makefile.sources
index 47171490..c93bfe7d 100644
--- a/tools/Makefile.sources
+++ b/tools/Makefile.sources
@@ -72,3 +72,9 @@ amd_hdmi_compliance_SOURCES = \
amd_hdmi_compliance.c \
$(NULL)
+msm_dp_compliance_SOURCES = \
+ msm_dp_compliance.c \
+ igt_dp_compliance.h \
+ igt_dp_compliance_hotplug.c \
+ igt_compliance_utils.c \
+ $(NULL)
diff --git a/tools/meson.build b/tools/meson.build
index 56877fb3..65f78938 100644
--- a/tools/meson.build
+++ b/tools/meson.build
@@ -101,5 +101,17 @@ executable('amd_hdmi_compliance', 'amd_hdmi_compliance.c',
install_rpath : bindir_rpathdir,
install : true)
+if libudev.found()
+ msm_dp_compliance_src = [
+ 'msm_dp_compliance.c',
+ 'igt_dp_compliance_hotplug.c',
+ 'igt_compliance_utils.c'
+ ]
+ executable('msm_dp_compliance', sources : msm_dp_compliance_src,
+ dependencies : [tool_deps, libudev],
+ install_rpath : bindir_rpathdir,
+ install : true)
+endif
+
subdir('i915-perf')
subdir('null_state_gen')
diff --git a/tools/msm_dp_compliance.c b/tools/msm_dp_compliance.c
new file mode 100644
index 00000000..7bc2bfa8
--- /dev/null
+++ b/tools/msm_dp_compliance.c
@@ -0,0 +1,812 @@
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright © 2017 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Displayport Compliance Testing Application
+ *
+ * This is the userspace component of the Displayport Compliance testing
+ * software required for compliance testing of the MSM Display Port driver.
+ * This must be running in order to successfully complete Display Port
+ * compliance testing. This app and the kernel code that accompanies it has been
+ * written to satify the requirements of the Displayport Link CTS 1.2 rev1.1
+ * specification from VESA. Note that this application does not support eDP
+ * compliance testing.
+ *
+ * Compliance Testing requires several components:
+ * - A kernel build that contains the patch set for DP compliance support
+ * - A Displayport Compliance Testing appliance such as Qdbox 980
+ * - This user application
+ * - A windows host machine to run the Qdbox 980 test software
+ * - Root access on the DUT due to the use of sysfs utility
+ *
+ * Test Setup:
+ * It is strongly recommended that the windows host, test appliance and DUT
+ * be freshly restarted before any testing begins to ensure that any previous
+ * configurations and settings will not interfere with test process. Refer to
+ * the test appliance documentation for setup, software installation and
+ * operation specific to that device.
+ *
+ * The Linux DUT must be in text (console) mode and cannot have any other
+ * display manager running. You must be logged in as root to run this user app.
+ * Once the user application is up and running, waiting for test requests, the
+ * software on the windows host can now be used to execute the compliance tests.
+ *
+ * This userspace application supports following tests from the DP CTS Spec
+ * Rev 1.1:
+ * - Video Pattern generation tests: This supports only the 24 and
+ * 18bpp color
+ * ramp test pattern (4.3.3.1).
+ *
+ * Connections (required):
+ * - Test Appliance connected to the external Displayport connector on the DUT
+ * - Test Appliance Monitor Out connected to Displayport connector on the
+ * monitor
+ * - Test appliance connected to the Windows Host via USB
+ *
+ * Debugfs Files:
+ * The file root for all the debugfs file:
+ * /sys/kernel/debug/dri/0/
+ *
+ * The specific files are as follows:
+ *
+ * msm_dp_test_active
+ * A simple flag that indicates whether or not compliance testing is currently
+ * active in the kernel. This flag is polled by userspace and once set, invokes
+ * the test handler in the user app. This flag is set by the test handler in the
+ * kernel after reading the registers requested by the test appliance.
+ *
+ * msm_dp_test_data
+ * Test data is used by the kernel to pass parameters to the user app. Eg: In
+ * case of EDID tests, the data that is delivered to the userspace is the video
+ * mode to be set for the test.
+ * In case of video pattern test, the data that is delivered to the userspace is
+ * the width and height of the test pattern and the bits per color value.
+ *
+ * msm_dp_test_type
+ * The test type variable instructs the user app as to what the requested test
+ * was from the sink device. These values defined at the top of the
+ * application's main implementation file must be kept in sync with the
+ * values defined in the kernel's drm_dp_helper.h file.
+ * This app is based on some prior work submitted in April 2015 by Todd Previte
+ * (<tprevite at gmail.com>).
+ *
+ * This work is based upon the intel_dp_compliance.c authored by
+ * Manasi Navare <manasi.d.navare at intel.com>
+ *
+ *
+ * This tool can be run as:
+ * ./msm_dp_compliance It will wait till you start compliance suite from
+ * Qdbox 980.
+ * ./msm_dp_compliance -h This will open the help
+ * ./msm_dp_compliance -i This will provide information about current
+ * connectors/CRTCs. This can be used for debugging purpose.
+ *
+ * Authors:
+ * Abhinav Kumar <abhinavk at codeaurora.org>
+ *
+ * Elements of the modeset code adapted from David Herrmann's
+ * DRM modeset example
+ *
+ */
+#include "igt.h"
+#include <errno.h>
+#include <getopt.h>
+#include <math.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <strings.h>
+#include <unistd.h>
+#include <termios.h>
+#include <sys/poll.h>
+#include <sys/time.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/select.h>
+#include <assert.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <time.h>
+
+#include "igt_dp_compliance.h"
+
+#include <stdlib.h>
+#include <signal.h>
+
+/* User Input definitions */
+#define HELP_DESCRIPTION 1
+
+/* Debugfs file definitions */
+#define MSM_DP_TEST_TYPE_FILE "msm_dp_test_type"
+#define MSM_DP_TEST_ACTIVE_FILE "msm_dp_test_active"
+#define MSM_DP_TEST_DATA_FILE "msm_dp_test_data"
+
+/* DRM definitions - must be kept in sync with the DRM header */
+#define DP_TEST_LINK_VIDEO_PATTERN (1 << 1)
+
+/* Global file pointers for the sysfs files */
+FILE *test_active_fp, *test_data_fp, *test_type_fp;
+
+bool video_pattern_flag;
+
+/* Video pattern test globals */
+uint16_t hdisplay;
+uint16_t vdisplay;
+uint8_t bitdepth;
+
+drmModeRes *resources;
+int drm_fd, modes, gen;
+uint64_t tiling = LOCAL_DRM_FORMAT_MOD_NONE;
+uint32_t depth = 24, stride, bpp;
+int specified_mode_num = -1, specified_disp_id = -1;
+int width, height;
+uint32_t test_crtc;
+uint32_t active_crtc;
+uint32_t test_connector_id;
+enum {
+ MSM_MODE_INVALID = -1,
+ MSM_MODE_NONE = 0,
+ MSM_MODE_VIDEO_PATTERN_TEST
+} msm_display_mode;
+
+struct test_video_pattern {
+ uint16_t hdisplay;
+ uint16_t vdisplay;
+ uint8_t bitdepth;
+ uint32_t fb;
+ uint32_t size;
+ struct igt_fb fb_pattern;
+ drmModeModeInfo mode;
+ uint32_t *pixmap;
+};
+
+struct connector {
+ uint32_t id;
+ int mode_valid;
+ drmModeModeInfo mode, mode_failsafe;
+ drmModeConnector *connector;
+ int crtc;
+ /* Standard and preferred frame buffer*/
+ uint8_t *pixmap;
+
+ struct test_video_pattern test_pattern;
+};
+
+static void clear_test_active(void)
+{
+ rewind(test_active_fp);
+ fprintf(test_active_fp, "%d", 0);
+ fflush(test_active_fp);
+}
+
+static FILE *fopenat(int dir, const char *name, const char *mode)
+{
+ int fd = openat(dir, name, O_RDWR);
+
+ return fdopen(fd, mode);
+}
+
+static void setup_debugfs_files(void)
+{
+ int dir = igt_debugfs_dir(drm_fd);
+
+ test_type_fp = fopenat(dir, MSM_DP_TEST_TYPE_FILE, "r");
+ igt_require(test_type_fp);
+
+ test_data_fp = fopenat(dir, MSM_DP_TEST_DATA_FILE, "r");
+ igt_require(test_data_fp);
+ test_active_fp = fopenat(dir, MSM_DP_TEST_ACTIVE_FILE, "w+");
+
+ igt_require(test_active_fp);
+
+ close(dir);
+
+ /* Reset the active flag for safety */
+ clear_test_active();
+}
+
+static unsigned long get_test_type(void)
+{
+ unsigned long test_type;
+ int ret;
+
+ if (!test_type_fp)
+ fprintf(stderr, "Invalid test_type file\n");
+ rewind(test_type_fp);
+ ret = fscanf(test_type_fp, "%lx", &test_type);
+ if (ret < 1 || test_type <= 0) {
+ igt_warn("test_type read failed - %lx\n", test_type);
+ return 0;
+ }
+
+ return test_type;
+}
+
+static void get_test_videopattern_data(void)
+{
+ int count = 0;
+ uint16_t video_pattern_value[3];
+ char video_pattern_attribute[15];
+ int ret;
+
+ if (!test_data_fp)
+ fprintf(stderr, "Invalid test_data file\n");
+
+ rewind(test_data_fp);
+ while (!feof(test_data_fp) && count < 3) {
+ ret = fscanf(test_data_fp, "%s %u\n", video_pattern_attribute,
+ (unsigned int *)&video_pattern_value[count++]);
+ if (ret < 2) {
+ igt_warn("test_data read failed\n");
+ return;
+ }
+ }
+
+ hdisplay = video_pattern_value[0];
+ vdisplay = video_pattern_value[1];
+ bitdepth = video_pattern_value[2];
+ igt_info("Hdisplay = %d\n", hdisplay);
+ igt_info("Vdisplay = %d\n", vdisplay);
+ igt_info("BitDepth = %u\n", bitdepth);
+
+}
+
+static int process_test_request(int test_type)
+{
+ int mode;
+ bool valid = false;
+
+ switch (test_type) {
+ case DP_TEST_LINK_VIDEO_PATTERN:
+ video_pattern_flag = true;
+ get_test_videopattern_data();
+ mode = MSM_MODE_VIDEO_PATTERN_TEST;
+ valid = true;
+ break;
+ default:
+ /* Unknown test type */
+ fprintf(stderr, "Invalid test request, ignored.\n");
+ break;
+ }
+
+ if (valid)
+ return update_display(mode, true);
+
+ return -1;
+}
+
+static void dump_info(void)
+{
+ igt_dump_connectors_fd(drm_fd);
+ igt_dump_crtcs_fd(drm_fd);
+}
+
+static int setup_video_pattern_framebuffer(struct connector *dp_conn)
+{
+ uint32_t video_width, video_height;
+
+ video_width = dp_conn->test_pattern.hdisplay;
+ video_height = dp_conn->test_pattern.vdisplay;
+
+ dp_conn->test_pattern.fb = igt_create_fb(drm_fd,
+ video_width, video_height,
+ DRM_FORMAT_XRGB8888,
+ LOCAL_DRM_FORMAT_MOD_NONE,
+ &dp_conn->test_pattern.fb_pattern);
+ igt_assert(dp_conn->test_pattern.fb);
+
+
+ dp_conn->test_pattern.pixmap = kmstest_dumb_map_buffer(drm_fd,
+ dp_conn->test_pattern.fb_pattern.gem_handle,
+ dp_conn->test_pattern.fb_pattern.size,
+ PROT_READ | PROT_WRITE);
+
+ if (dp_conn->test_pattern.pixmap == NULL)
+ return -1;
+
+ dp_conn->test_pattern.size = dp_conn->test_pattern.fb_pattern.size;
+ memset(dp_conn->test_pattern.pixmap, 0, dp_conn->test_pattern.size);
+ return 0;
+
+}
+
+static int set_test_mode(struct connector *dp_conn)
+{
+ int ret = 0;
+ int i;
+ drmModeConnector *c = dp_conn->connector;
+
+ /* Ignore any disconnected devices */
+ if (c->connection != DRM_MODE_CONNECTED) {
+ igt_warn("Connector %u disconnected\n", c->connector_id);
+ return -ENOENT;
+ }
+ igt_info("Connector setup:\n");
+
+ /*
+ * to-do: for cases where driver doesn't support 4K but
+ * its the preferred mode of the sink, use 640x480 as
+ * default resolution
+ */
+
+ for (i = 0; i < c->count_modes; i++) {
+ if (c->modes[i].hdisplay == 640 &&
+ c->modes[i].vdisplay == 480 &&
+ c->modes[i].vrefresh == 60) {
+ igt_info("found idx of failsafe mode = %d\n", i);
+ break;
+ }
+ }
+
+ if (i == c->count_modes) {
+ igt_info("didn't find failsafe using default\n");
+ i = 0;
+ }
+
+ dp_conn->test_pattern.mode = c->modes[i];
+ dp_conn->test_pattern.mode.hdisplay = c->modes[i].hdisplay;
+ dp_conn->test_pattern.mode.vdisplay = c->modes[i].vdisplay;
+
+ igt_info("failsafe (mode %d) for connector %u is %ux%u\n", i,
+ dp_conn->id, c->modes[i].hdisplay, c->modes[i].vdisplay);
+ fflush(stdin);
+
+ if (video_pattern_flag) {
+ dp_conn->test_pattern.hdisplay = hdisplay;
+ dp_conn->test_pattern.vdisplay = vdisplay;
+ dp_conn->test_pattern.bitdepth = bitdepth;
+
+ ret = setup_video_pattern_framebuffer(dp_conn);
+ if (ret) {
+ igt_warn("Creating framebuffer for connector %u failed (%d)\n",
+ c->connector_id, ret);
+ return ret;
+ }
+
+ ret = igt_fill_cts_framebuffer(dp_conn->test_pattern.pixmap,
+ dp_conn->test_pattern.hdisplay,
+ dp_conn->test_pattern.vdisplay,
+ dp_conn->test_pattern.bitdepth,
+ 0);
+ if (ret) {
+ igt_warn("Filling framebuffer for connector %u failed (%d)\n",
+ c->connector_id, ret);
+ return ret;
+ }
+ /* unmapping the buffer previously mapped during setup */
+ munmap(dp_conn->test_pattern.pixmap,
+ dp_conn->test_pattern.size);
+ }
+
+ return ret;
+}
+
+static int set_video(int mode, struct connector *test_connector)
+{
+ drmModeModeInfo *requested_mode;
+ uint32_t required_fb_id;
+ struct igt_fb required_fb;
+ int ret = 0;
+
+ switch (mode) {
+ case MSM_MODE_NONE:
+ igt_info("NONE\n");
+ ret = drmModeSetCrtc(drm_fd, test_connector->crtc,
+ -1, 0, 0, NULL, 0, NULL);
+ goto out;
+ case MSM_MODE_VIDEO_PATTERN_TEST:
+ igt_info("VIDEO PATTERN TEST\n");
+ requested_mode = &test_connector->test_pattern.mode;
+ required_fb_id = test_connector->test_pattern.fb;
+ required_fb = test_connector->test_pattern.fb_pattern;
+ break;
+ case MSM_MODE_INVALID:
+ default:
+ igt_warn("INVALID! (%08x) Mode set aborted!\n", mode);
+ return -1;
+ }
+
+ igt_info("CRTC(%u):", test_connector->crtc);
+ kmstest_dump_mode(requested_mode);
+ ret = drmModeSetCrtc(drm_fd, test_connector->crtc, required_fb_id, 0, 0,
+ &test_connector->id, 1, requested_mode);
+ if (ret) {
+ igt_warn("Failed to set mode (%dx%d@%dHz): %s\n",
+ requested_mode->hdisplay, requested_mode->vdisplay,
+ requested_mode->vrefresh, strerror(errno));
+ igt_remove_fb(drm_fd, &required_fb);
+
+ }
+ /* Keep the pattern for 1 sec for Qdbox 980 to detect it */
+ sleep(1);
+
+out:
+ if (ret) {
+ igt_warn("Failed to set CRTC for connector %u\n",
+ test_connector->id);
+ }
+
+ return ret;
+}
+
+static int
+set_default_mode(struct connector *c, bool set_mode)
+{
+ unsigned int fb_id = 0;
+ struct igt_fb fb_info;
+ int ret = 0;
+ int i;
+ drmModeConnector *conn = c->connector;
+
+ if (!set_mode) {
+ igt_info("not resetting the mode\n");
+ ret = drmModeSetCrtc(drm_fd, c->crtc, 0, 0, 0,
+ NULL, 0, NULL);
+ if (ret)
+ igt_warn("Failed to unset mode");
+ return ret;
+ }
+
+ for (i = 0; i < conn->count_modes; i++) {
+ if (conn->modes[i].hdisplay == 640 &&
+ conn->modes[i].vdisplay == 480 &&
+ conn->modes[i].vrefresh == 60) {
+ igt_info("found idx of failsafe mode = %d\n", i);
+ break;
+ }
+ }
+
+ if (i == conn->count_modes) {
+ igt_info("didn't find failsafe using default\n");
+ i = 0;
+ }
+
+ c->mode = c->connector->modes[i];
+
+ width = c->mode.hdisplay;
+ height = c->mode.vdisplay;
+
+ fb_id = igt_create_pattern_fb(drm_fd, width, height,
+ DRM_FORMAT_XRGB8888,
+ tiling, &fb_info);
+
+ kmstest_dump_mode(&c->mode);
+ drmModeSetCrtc(drm_fd, c->crtc, -1, 0, 0, NULL, 0, NULL);
+ ret = drmModeSetCrtc(drm_fd, c->crtc, fb_id, 0, 0,
+ &c->id, 1, &c->mode);
+ if (ret) {
+ igt_warn("Failed to set mode (%dx%d@%dHz): %s\n",
+ width, height, c->mode.vrefresh, strerror(errno));
+ igt_remove_fb(drm_fd, &fb_info);
+
+ }
+
+ return ret;
+}
+
+static uint32_t find_crtc_for_connector(drmModeConnector *c)
+{
+ drmModeEncoder *e;
+ drmModeCrtcPtr crtc_ptr;
+ int i;
+
+ active_crtc = 0;
+
+ for (i = 0; i < c->count_encoders; i++) {
+ e = drmModeGetEncoder(drm_fd, c->encoders[i]);
+
+ /* if there is an active crtc use it */
+ if (e->crtc_id) {
+ active_crtc = e->crtc_id;
+ drmModeFreeEncoder(e);
+ break;
+ }
+ drmModeFreeEncoder(e);
+ }
+
+ /* no need to search further if active crtc is found */
+ if (active_crtc)
+ return active_crtc;
+
+ /*
+ * if there is no active crtc find one from the list of
+ * unused ones. Cannot use anything from possible_crtc of
+ * of encoder because it then tries to steal the crtc of the
+ * primary display. DPU driver does not support switching CRTCs
+ * across displays in the same commit. Hence need to find some
+ * other unused crtc.
+ */
+ for (i = 0; i < resources->count_crtcs; i++) {
+ crtc_ptr = drmModeGetCrtc(drm_fd, resources->crtcs[i]);
+ /* if a crtc which is unused is found , use it */
+ if (!crtc_ptr->mode_valid) {
+ active_crtc = crtc_ptr->crtc_id;
+ drmModeFreeCrtc(crtc_ptr);
+ break;
+ }
+ drmModeFreeCrtc(crtc_ptr);
+ }
+
+ return active_crtc;
+}
+
+/*
+ * Re-probe connectors and do a modeset based on test request or
+ * in case of a hotplug uevent.
+ *
+ * @mode: Video mode requested by the test
+ * @is_compliance_test: 1: If it is a compliance test
+ * 0: If it is a hotplug event
+ *
+ * Returns:
+ * 0: On Success
+ * -1: On failure
+ */
+int update_display(int mode, bool is_compliance_test)
+{
+ struct connector *connectors, *conn;
+ int cnt, ret = 0;
+ bool set_mode;
+ //int crtc;
+
+ resources = drmModeGetResources(drm_fd);
+ if (!resources) {
+ igt_warn("drmModeGetResources failed: %s\n", strerror(errno));
+ return -1;
+ }
+
+ connectors = calloc(resources->count_connectors,
+ sizeof(struct connector));
+ if (!connectors)
+ return -1;
+
+ /* Find any connected displays */
+ for (cnt = 0; cnt < resources->count_connectors; cnt++) {
+ drmModeConnector *c;
+
+ conn = &connectors[cnt];
+ conn->id = resources->connectors[cnt];
+ c = drmModeGetConnector(drm_fd, conn->id);
+ if (c->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
+ c->connection == DRM_MODE_CONNECTED) {
+ test_connector_id = c->connector_id;
+ conn->connector = c;
+ conn->crtc = find_crtc_for_connector(c);
+ test_crtc = conn->crtc;
+ set_mode = true;
+ break;
+ } else if (c->connector_id == test_connector_id &&
+ c->connection == DRM_MODE_DISCONNECTED) {
+ conn->connector = c;
+ conn->crtc = test_crtc;
+ set_mode = false;
+ break;
+ }
+ }
+
+ if (cnt == resources->count_connectors) {
+ ret = -1;
+ goto err;
+ }
+
+ if (is_compliance_test) {
+ set_test_mode(conn);
+ ret = set_video(MSM_MODE_NONE, conn);
+ ret = set_video(mode, conn);
+
+ } else
+ ret = set_default_mode(conn, set_mode);
+
+ err:
+ drmModeFreeConnector(conn->connector);
+ /* Error condition if no connected displays */
+ free(connectors);
+ drmModeFreeResources(resources);
+ return ret;
+}
+
+static const char optstr[] = "hi";
+
+static void __attribute__((noreturn)) usage(char *name, char opt)
+{
+ igt_info("usage: %s [-hi]\n", name);
+ igt_info("\t-i\tdump info\n");
+ igt_info("\tDefault is to respond to Qd980 tests\n");
+ exit((opt != 'h') ? -1 : 0);
+}
+
+static void cleanup_debugfs(void)
+{
+ fclose(test_active_fp);
+ fclose(test_data_fp);
+ fclose(test_type_fp);
+}
+
+static void __attribute__((noreturn)) cleanup_and_exit(int ret)
+{
+ cleanup_debugfs();
+ close(drm_fd);
+ igt_info("Compliance testing application exiting\n");
+ exit(ret);
+}
+
+static void cleanup_test(void)
+{
+ video_pattern_flag = false;
+ hdisplay = 0;
+ vdisplay = 0;
+ bitdepth = 0;
+}
+
+static void read_test_request(void)
+{
+ unsigned long test_type;
+
+ test_type = get_test_type();
+
+ process_test_request(test_type);
+ cleanup_test();
+ clear_test_active();
+}
+
+static gboolean test_handler(GIOChannel *source, GIOCondition condition,
+ gpointer data)
+{
+ unsigned long test_active;
+ int ret;
+
+ rewind(test_active_fp);
+
+ ret = fscanf(test_active_fp, "%lx", &test_active);
+ if (ret < 1)
+ return FALSE;
+
+ if (test_active)
+ read_test_request();
+
+ return TRUE;
+}
+
+static gboolean input_event(GIOChannel *source, GIOCondition condition,
+ gpointer data)
+{
+ gchar buf[2];
+ gsize count;
+
+ count = read(g_io_channel_unix_get_fd(source), buf, sizeof(buf));
+ if (buf[0] == 'q' && (count == 1 || buf[1] == '\n'))
+ cleanup_and_exit(0);
+
+ return TRUE;
+}
+
+int main(int argc, char **argv)
+{
+ int c;
+ int ret = 0;
+ GIOChannel *stdinchannel, *testactive_channel;
+ GMainLoop *mainloop;
+ bool opt_dump_info = false;
+ struct option long_opts[] = {
+ {"help-description", 0, 0, HELP_DESCRIPTION},
+ {"help", 0, 0, 'h'},
+ };
+
+ enter_exec_path(argv);
+
+ while ((c = getopt_long(argc, argv, optstr, long_opts, NULL)) != -1) {
+ switch (c) {
+ case 'i':
+ opt_dump_info = true;
+ break;
+ case HELP_DESCRIPTION:
+ igt_info("DP Compliance Test Suite using Qd 980\n");
+ igt_info("Video Pattern Generation tests\n");
+ exit(0);
+ break;
+ default:
+ /* fall through */
+ case 'h':
+ usage(argv[0], c);
+ break;
+ }
+ }
+
+ set_termio_mode();
+
+ drm_fd = drm_open_driver(DRIVER_ANY);
+
+ kmstest_set_vt_graphics_mode();
+ setup_debugfs_files();
+ cleanup_test();
+ if (opt_dump_info) {
+ dump_info();
+ goto out_close;
+ }
+
+ /* Get the DP connector ID and CRTC */
+ if (update_display(0, false)) {
+ igt_warn("Failed to set default mode\n");
+ ret = -1;
+ goto out_close;
+ }
+
+ mainloop = g_main_loop_new(NULL, FALSE);
+ if (!mainloop) {
+ igt_warn("Failed to create GMainLoop\n");
+ ret = -1;
+ goto out_close;
+ }
+
+ if (!igt_dp_compliance_setup_hotplug()) {
+ igt_warn("Failed to initialize hotplug support\n");
+ goto out_mainloop;
+ }
+
+ testactive_channel = g_io_channel_unix_new(fileno(test_active_fp));
+ if (!testactive_channel) {
+ igt_warn("Failed to create test_active GIOChannel\n");
+ goto out_close;
+ }
+
+ ret = g_io_add_watch(testactive_channel, G_IO_IN | G_IO_ERR,
+ test_handler, NULL);
+ if (ret < 0) {
+ igt_warn("Failed to add watch on udev GIOChannel\n");
+ goto out_close;
+ }
+
+ stdinchannel = g_io_channel_unix_new(0);
+ if (!stdinchannel) {
+ igt_warn("Failed to create stdin GIOChannel\n");
+ goto out_hotplug;
+ }
+
+ ret = g_io_add_watch(stdinchannel, G_IO_IN | G_IO_ERR, input_event,
+ NULL);
+ if (ret < 0) {
+ igt_warn("Failed to add watch on stdin GIOChannel\n");
+ goto out_stdio;
+ }
+
+ ret = 0;
+
+ igt_info("*************DP Compliance Testing using Qdbox 980*************\n");
+ igt_info("Waiting for test request......\n");
+
+ g_main_loop_run(mainloop);
+
+out_stdio:
+ g_io_channel_shutdown(stdinchannel, TRUE, NULL);
+out_hotplug:
+ igt_dp_compliance_cleanup_hotplug();
+out_mainloop:
+ g_main_loop_unref(mainloop);
+out_close:
+ cleanup_debugfs();
+ close(drm_fd);
+
+ igt_assert_eq(ret, 0);
+
+ igt_info("Compliance testing application exiting\n");
+ igt_exit();
+}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the igt-dev
mailing list