[igt-dev] [PATCH i-g-t v6 1/2] tests/kms_content_protection: Add MST subtests
Karthik B S
karthik.b.s at intel.com
Thu Feb 4 08:02:36 UTC 2021
On 2/4/2021 10:23 AM, Gupta, Anshuman wrote:
>
>> -----Original Message-----
>> From: Karthik B S <karthik.b.s at intel.com>
>> Sent: Thursday, February 4, 2021 9:40 AM
>> To: igt-dev at lists.freedesktop.org
>> Cc: Gupta, Anshuman <anshuman.gupta at intel.com>; C, Ramalingam
>> <ramalingam.c at intel.com>; B S, Karthik <karthik.b.s at intel.com>
>> Subject: [PATCH i-g-t v6 1/2] tests/kms_content_protection: Add MST
>> subtests
>>
>> Add subtests to verify content protection simultaneously on multiple
>> outputs on the same MST topology.
>>
>> v3: -Remove the logging which are no longer required. (Anshuman)
>> -Add logic to verify that CP is still enabled on other connectors
>> while disabling it on one of the connectors. (Anshuman)
>>
>> v4: -Rename is_output_support_cp_capable(). (Anshuman, Ram)
>> -Rephrase the comment in is_dp_mst_output. (Anshuman)
>> -Remove the redundant HDCP check hunk before HDCP disable.
>> (Anshuman)
>> -Check the link on the HDCP enabled outputs when one of the outputs
>> in the same DP MST topology is disabled. (Anshuman)
>> -Revert the change in test_content_protection_cleanup(). (Anshuman)
>> -Create fb's in a common function for both MST and SST. (Ram)
>> -Rename is_dp_mst_output() to output_is_dp_mst(). (Ram)
>> -Remove the redundant igt_debug() before HDCP enable. (Ram)
>> -Rephrase the igt_assert statement during HDCP enable. (Ram)
>> -Optimize the execution time by checking the link for all MST
>> connectors together. (Ram)
>> -No need of loop where we disable CP on one of the MST outputs. (Ram)
>> -During verification by disabling one of the MST outputs,
>> check for the negative case until the required timeout. (Ram)
>>
>> v5: -Modify skip message when HDCP support is not present. (Anshuman)
>> -Remove the definition of color_t structure as it is no longer used.
>>
>> v6: -Optimize execution time in LIC test. (Anshuman)
>>
>> Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
>> Signed-off-by: Karthik B S <karthik.b.s at intel.com>
>> ---
>> tests/kms_content_protection.c | 277
>> ++++++++++++++++++++++++++++++---
>> 1 file changed, 255 insertions(+), 22 deletions(-)
>>
>> diff --git a/tests/kms_content_protection.c
>> b/tests/kms_content_protection.c index 303ed418..793f6e11 100644
>> --- a/tests/kms_content_protection.c
>> +++ b/tests/kms_content_protection.c
>> @@ -179,16 +179,10 @@ static void modeset_with_fb(const enum pipe
>> pipe, igt_output_t *output,
>> igt_output_override_mode(output, &mode);
>> igt_output_set_pipe(output, pipe);
>>
>> - igt_create_color_fb(display->drm_fd, mode.hdisplay,
>> mode.vdisplay,
>> - DRM_FORMAT_XRGB8888,
>> LOCAL_DRM_FORMAT_MOD_NONE,
>> - 1.f, 0.f, 0.f, &data.red);
>> - igt_create_color_fb(display->drm_fd, mode.hdisplay,
>> mode.vdisplay,
>> - DRM_FORMAT_XRGB8888,
>> LOCAL_DRM_FORMAT_MOD_NONE,
>> - 0.f, 1.f, 0.f, &data.green);
>> -
>> primary = igt_output_get_plane_type(output,
>> DRM_PLANE_TYPE_PRIMARY);
>> igt_display_commit2(display, s);
>> igt_plane_set_fb(primary, &data.red);
>> + igt_fb_set_size(&data.red, primary, mode.hdisplay, mode.vdisplay);
>>
>> /* Wait for Flip completion before starting the HDCP authentication
>> */
>> commit_display_and_wait_for_flip(s);
>> @@ -458,37 +452,83 @@ static bool sink_hdcp2_capable(igt_output_t
>> *output)
>> return strstr(buf, "HDCP2.2");
>> }
>>
>> -static void
>> -test_content_protection(enum igt_commit_style s, int content_type)
>> +static void prepare_modeset_on_mst_output(igt_output_t *output,
>> enum
>> +pipe pipe)
>> {
>> - igt_display_t *display = &data.display;
>> - igt_output_t *output;
>> - int valid_tests = 0;
>> + drmModeConnectorPtr c = output->config.connector;
>> + drmModeModeInfo *mode;
>> + igt_plane_t *primary;
>> + int i, width, height;
>>
>> - if (data.cp_tests & CP_MEI_RELOAD)
>> - igt_require_f(igt_kmod_is_loaded("mei_hdcp"),
>> - "mei_hdcp module is not loaded\n");
>> + mode = igt_output_get_mode(output);
>>
>> - for_each_connected_output(display, output) {
>> + /*
>> + * TODO: Add logic to use the highest possible modes on each
>> output.
>> + * Currently using 2k modes by default on all the outputs.
>> + */
>> + igt_debug("Before mode override: Output %s Mode hdisplay %d
>> Mode vdisplay %d\n",
>> + output->name, mode->hdisplay, mode->vdisplay);
>> +
>> + if (mode->hdisplay > 1920 && mode->vdisplay > 1080) {
>> + for (i = 0; i < c->count_modes; i++) {
>> + if (c->modes[i].hdisplay <= 1920 && c-
>>> modes[i].vdisplay <= 1080) {
>> + mode = &c->modes[i];
>> + igt_output_override_mode(output, mode);
>> + break;
>> + }
>> + }
>> + }
>> +
>> + igt_debug("After mode overide: Output %s Mode hdisplay %d
>> Mode vdisplay %d\n",
>> + output->name, mode->hdisplay, mode->vdisplay);
>> +
>> + width = mode->hdisplay;
>> + height = mode->vdisplay;
>> +
>> + igt_output_set_pipe(output, pipe);
>> + primary = igt_output_get_plane_type(output,
>> DRM_PLANE_TYPE_PRIMARY);
>> + igt_plane_set_fb(primary, NULL);
>> + igt_plane_set_fb(primary, pipe % 2 ? &data.red : &data.green);
>> + igt_fb_set_size(pipe % 2 ? &data.red : &data.green, primary, width,
>> height);
>> + igt_plane_set_size(primary, width, height); }
>> +
>> +static bool output_hdcp_capable(igt_output_t *output, int content_type)
>> +{
>> if (!output-
>>> props[IGT_CONNECTOR_CONTENT_PROTECTION])
>> - continue;
>> + return false;
>>
>> if (!output->props[IGT_CONNECTOR_HDCP_CONTENT_TYPE]
>> &&
>> content_type)
>> - continue;
>> -
>> - igt_info("CP Test execution on %s\n", output->name);
>> + return false;
>>
>> if (content_type && !sink_hdcp2_capable(output)) {
>> igt_info("\tSkip %s (Sink has no HDCP2.2
>> support)\n",
>> output->name);
>> - continue;
>> + return false;
>> } else if (!sink_hdcp_capable(output)) {
>> igt_info("\tSkip %s (Sink has no HDCP support)\n",
>> output->name);
>> - continue;
>> + return false;
>> }
>>
>> + return true;
>> +}
>> +
>> +static void
>> +test_content_protection(enum igt_commit_style s, int content_type) {
>> + igt_display_t *display = &data.display;
>> + igt_output_t *output;
>> + int valid_tests = 0;
>> +
>> + if (data.cp_tests & CP_MEI_RELOAD)
>> + igt_require_f(igt_kmod_is_loaded("mei_hdcp"),
>> + "mei_hdcp module is not loaded\n");
>> +
>> + for_each_connected_output(display, output) {
>> + if (!output_hdcp_capable(output, content_type))
>> + continue;
>> +
>> test_content_protection_on_output(output, s,
>> content_type);
>> valid_tests++;
>> }
>> @@ -496,6 +536,150 @@ test_content_protection(enum
>> igt_commit_style s, int content_type)
>> igt_require_f(valid_tests, "No connector found with HDCP
>> capability\n"); }
>>
>> +static int parse_path_blob(char *blob_data) {
>> + int connector_id;
>> + char *encoder;
>> +
>> + encoder = strtok(blob_data, ":");
>> + igt_assert_f(!strcmp(encoder, "mst"), "PATH connector property
>> +expected to have 'mst'\n");
>> +
>> + connector_id = atoi(strtok(NULL, "-"));
>> +
>> + return connector_id;
>> +}
>> +
>> +static bool output_is_dp_mst(igt_output_t *output, int i) {
>> + drmModePropertyBlobPtr path_blob = NULL;
>> + uint64_t path_blob_id;
>> + drmModeConnector *connector = output->config.connector;
>> + struct kmstest_connector_config config;
>> + const char *encoder;
>> + int connector_id;
>> + static int prev_connector_id;
>> +
>> + kmstest_get_connector_config(data.drm_fd, output-
>>> config.connector->connector_id, -1, &config);
>> + encoder = kmstest_encoder_type_str(config.encoder-
>>> encoder_type);
>> +
>> + if (strcmp(encoder, "DP MST"))
>> + return false;
>> +
>> + igt_assert(kmstest_get_property(data.drm_fd, connector-
>>> connector_id,
>> + DRM_MODE_OBJECT_CONNECTOR, "PATH", NULL,
>> + &path_blob_id, NULL));
>> +
>> + igt_assert(path_blob = drmModeGetPropertyBlob(data.drm_fd,
>> +path_blob_id));
>> +
>> + connector_id = parse_path_blob((char *) path_blob->data);
>> +
>> + /*
>> + * Discarding outputs of other DP MST topology.
>> + * Testing only on outputs on the topology we got previously
>> + */
>> + if (i == 0) {
>> + prev_connector_id = connector_id;
>> + } else {
>> + if (connector_id != prev_connector_id)
>> + return false;
>> + }
>> +
>> + drmModeFreePropertyBlob(path_blob);
>> +
>> + return true;
>> +}
>> +
>> +static void test_cp_lic_on_mst(igt_output_t *mst_outputs[], int
>> +valid_outputs, bool first_output) {
>> + int ret, count;
>> + uint64_t val;
>> +
>> + /* Only wait for the first output, this optimizes the test execution
>> time */
>> + ret = wait_for_prop_value(mst_outputs[first_output], CP_DESIRED,
>> LIC_PERIOD_MSEC);
>> + igt_assert_f(!ret, "Content Protection LIC Failed on %s\n",
>> +mst_outputs[0]->name);
>> +
>> + for (count = first_output + 1; count < valid_outputs; count++) {
>> + val = igt_output_get_prop(mst_outputs[count],
>> IGT_CONNECTOR_CONTENT_PROTECTION);
>> + igt_assert_f(val != CP_DESIRED, "Content Protection LIC
>> Failed on %s\n", mst_outputs[count]->name);
>> + }
>> +}
>> +
>> +static void
>> +test_content_protection_mst(int content_type) {
>> + igt_display_t *display = &data.display;
>> + igt_output_t *output;
>> + int valid_outputs = 0, dp_mst_outputs = 0, ret, count, max_pipe =
>> 0, i;
>> + enum pipe pipe;
>> + igt_output_t *mst_output[IGT_MAX_PIPES];
>> +
>> + for_each_connected_output(display, output) {
>> + if (!output_is_dp_mst(output, valid_outputs))
>> + continue;
>> +
>> + dp_mst_outputs++;
>> +
>> + if (!output_hdcp_capable(output, content_type))
> Let's check hdcp capability after modeset on MST , we can't pre-assume modeset being done
> for multiple streams, without modeset we may not get hdcp capability.
Thank you for the review. Sure, I'll update this.
Thanks and Regards,
Karthik.B.S
>> + continue;
>> +
>> + mst_output[valid_outputs] = output;
>> + valid_outputs++;
>> + }
>> +
>> + igt_require_f(dp_mst_outputs > 1, "No DP MST set up with >= 2
>> outputs found in a single topology\n");
>> + igt_require_f(valid_outputs > 1, "DP MST outputs do not have the
>> +required HDCP support\n");
>> +
>> + for_each_pipe(display, pipe)
>> + max_pipe++;
>> +
>> + if (valid_outputs > max_pipe)
>> + valid_outputs = max_pipe;
>> +
>> + pipe = PIPE_A;
>> +
>> + for (count = 0; count < valid_outputs; count++) {
>> + igt_assert_f(igt_pipe_connector_valid(pipe,
>> mst_output[count]),
>> +"Output-pipe combination invalid\n");
>> +
>> + prepare_modeset_on_mst_output(mst_output[count],
>> pipe);
>> + pipe++;
>> + }
>> +
>> + igt_display_commit2(display, COMMIT_ATOMIC);
>> +
>> + for (count = 0; count < valid_outputs; count++) {
>> + igt_output_set_prop_value(mst_output[count],
>> +IGT_CONNECTOR_CONTENT_PROTECTION, CP_DESIRED);
>> +
>> + if (output->props[IGT_CONNECTOR_HDCP_CONTENT_TYPE])
>> + igt_output_set_prop_value(mst_output[count],
>> IGT_CONNECTOR_HDCP_CONTENT_TYPE, content_type);
>> + }
>> +
>> + igt_display_commit2(display, COMMIT_ATOMIC);
>> +
>> + for (count = 0; count < valid_outputs; count++) {
>> + ret = wait_for_prop_value(mst_output[count],
>> CP_ENABLED, KERNEL_AUTH_TIME_ALLOWED_MSEC);
>> + igt_assert_f(ret, "Content Protection not enabled on %s\n",
>> mst_output[count]->name);
>> + }
>> +
>> + if (data.cp_tests & CP_LIC)
>> + test_cp_lic_on_mst(mst_output, valid_outputs, 0);
>> +
>> + /*
>> + * Verify if CP is still enabled on other outputs by disabling CP on
>> the first output.
>> + */
>> + igt_debug("CP Prop being UNDESIRED on %s\n", mst_output[0]-
>>> name);
>> + test_cp_disable(mst_output[0], COMMIT_ATOMIC);
>> +
>> + /* CP is expected to be still enabled on other outputs*/
>> + for (i = 1; i < valid_outputs; i++) {
>> + /* Wait for the timeout to verify CP is not disabled */
>> + ret = wait_for_prop_value(mst_output[i], CP_UNDESIRED,
>> KERNEL_DISABLE_TIME_ALLOWED_MSEC);
>> + igt_assert_f(!ret, "Content Protection not enabled on %s\n",
>> mst_output[i]->name);
>> + }
>> +
>> + if (data.cp_tests & CP_LIC)
>> + test_cp_lic_on_mst(mst_output, valid_outputs, 1); }
>> +
>> static void test_content_protection_cleanup(void)
>> {
>> igt_display_t *display = &data.display; @@ -514,6 +698,31 @@
>> static void test_content_protection_cleanup(void)
>> igt_info("CP Prop being UNDESIRED on %s\n", output-
>>> name);
>> test_cp_disable(output, COMMIT_ATOMIC);
>> }
>> +
>> + igt_remove_fb(data.drm_fd, &data.red);
>> + igt_remove_fb(data.drm_fd, &data.green); }
>> +
>> +static void create_fbs(void)
>> +{
>> + igt_output_t *output;
>> + int width, height;
>> + drmModeModeInfo *mode;
>> +
>> + for_each_connected_output(&data.display, output) {
>> + mode = igt_output_get_mode(output);
>> + igt_assert(mode);
>> +
>> + width = max(width, mode->hdisplay);
>> + height = max(height, mode->vdisplay);
>> + }
>> +
>> + igt_create_color_fb(data.drm_fd, width, height,
>> + DRM_FORMAT_XRGB8888,
>> LOCAL_DRM_FORMAT_MOD_NONE,
>> + 1.f, 0.f, 0.f, &data.red);
>> + igt_create_color_fb(data.drm_fd, width, height,
>> + DRM_FORMAT_XRGB8888,
>> LOCAL_DRM_FORMAT_MOD_NONE,
>> + 0.f, 1.f, 0.f, &data.green);
>> }
>>
>> igt_main
>> @@ -522,6 +731,8 @@ igt_main
>> data.drm_fd = drm_open_driver_master(DRIVER_ANY);
>>
>> igt_display_require(&data.display, data.drm_fd);
>> +
>> + create_fbs();
>> }
>>
>> igt_subtest("legacy") {
>> @@ -592,6 +803,28 @@ igt_main
>> test_content_protection(COMMIT_ATOMIC,
>> HDCP_CONTENT_TYPE_0);
>> }
>>
>> + igt_describe("Test Content protection over DP MST");
>> + igt_subtest("dp-mst-type-0") {
>> + test_content_protection_mst(HDCP_CONTENT_TYPE_0);
>> + }
>> +
>> + igt_describe("Test Content protection over DP MST with LIC");
>> + igt_subtest("dp-mst-lic-type-0") {
>> + data.cp_tests = CP_LIC;
>> + test_content_protection_mst(HDCP_CONTENT_TYPE_0);
>> + }
>> +
>> + igt_describe("Test Content protection over DP MST");
>> + igt_subtest("dp-mst-type-1") {
>> + test_content_protection_mst(HDCP_CONTENT_TYPE_1);
>> + }
>> +
>> + igt_describe("Test Content protection over DP MST with LIC");
>> + igt_subtest("dp-mst-lic-type-1") {
>> + data.cp_tests = CP_LIC;
>> + test_content_protection_mst(HDCP_CONTENT_TYPE_1);
>> + }
>> +
>> igt_fixture {
>> test_content_protection_cleanup();
>> igt_display_fini(&data.display);
>> --
>> 2.22.0
More information about the igt-dev
mailing list