[igt-dev] [PATCH i-g-t] tests/kms_flip_scaled_crc: try to set mode to 1080p during test

Lisovskiy, Stanislav stanislav.lisovskiy at intel.com
Tue Jan 26 11:28:42 UTC 2021


On Sun, Jan 24, 2021 at 04:40:02PM +0200, Juha-Pekka Heikkila wrote:
> Different default resolutions will affect test execution, try to normalize
> situation by always going to 1080p resolution. If this test will run on
> connector which doesn't have 1080p resolution, default resolution will be
> used. On gen<11 will be used 480p
> 
> v2 (Stan): Use igt functions for modesetting. Change igt_warn to igt_debug
> because there's one ICL in intel CI with eDP that would show up warnings
> randomly depending which machine run which test.
> 
> Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>

> ---
>  tests/kms_flip_scaled_crc.c | 85 ++++++++++++++++++++-----------------
>  1 file changed, 45 insertions(+), 40 deletions(-)
> 
> diff --git a/tests/kms_flip_scaled_crc.c b/tests/kms_flip_scaled_crc.c
> index 93d8031f7..f77484063 100644
> --- a/tests/kms_flip_scaled_crc.c
> +++ b/tests/kms_flip_scaled_crc.c
> @@ -35,6 +35,8 @@ typedef struct {
>  	struct igt_fb small_fb;
>  	struct igt_fb big_fb;
>  	igt_pipe_crc_t *pipe_crc;
> +	uint32_t attemptmodewidth;
> +	uint32_t attemptmodeheight;
>  } data_t;
>  
>  const struct {
> @@ -133,8 +135,7 @@ static void test_flip_to_scaled(data_t *data, uint32_t index, enum pipe pipe,
>  {
>  	igt_plane_t *primary;
>  	igt_crc_t small_crc, big_crc;
> -
> -	drmModeModeInfo *mode;
> +	drmModeModeInfoPtr modetoset = NULL;
>  	struct drm_event_vblank ev;
>  	int ret;
>  
> @@ -142,41 +143,24 @@ static void test_flip_to_scaled(data_t *data, uint32_t index, enum pipe pipe,
>  
>  	igt_debug("running on output %s pipe %s\n", output->name,
>  		  kmstest_pipe_name(pipe));
> +
>  	if (data->big_fb.fb_id == 0) {
> -		mode = igt_output_get_mode(output);
> -
> -		// big fb will be 4k unless running on older than ICL
> -		if (data->gen < 11) {
> -			setup_fb(data, &data->small_fb,
> -				 min(mode->hdisplay, 640),
> -				 min(mode->vdisplay, 480),
> -				 flip_scenario_test[index].firstformat,
> -				 flip_scenario_test[index].firstmodifier);
> -
> -			setup_fb(data, &data->big_fb,
> -				 1280, 960,
> -				 flip_scenario_test[index].secondformat,
> -				 flip_scenario_test[index].secondmodifier);
> -			igt_debug("small fb %dx%d\n", data->small_fb.width,
> -			          data->small_fb.height);
> -			igt_debug("big fb %dx%d\n", data->big_fb.width,
> -			          data->big_fb.height);
> -		} else {
> -			setup_fb(data, &data->small_fb,
> -				 min(mode->hdisplay, 1920),
> -				 min(mode->vdisplay, 1080),
> -				 flip_scenario_test[index].firstformat,
> -				 flip_scenario_test[index].firstmodifier);
> -
> -			setup_fb(data, &data->big_fb,
> -				 3840, 2160,
> -				 flip_scenario_test[index].secondformat,
> -				 flip_scenario_test[index].secondmodifier);
> -			igt_debug("small fb %dx%d\n", data->small_fb.width,
> -			          data->small_fb.height);
> -			igt_debug("big fb %dx%d\n", data->big_fb.width,
> -			          data->big_fb.height);
> -		}
> +		setup_fb(data, &data->small_fb,
> +				data->attemptmodewidth,
> +				data->attemptmodeheight,
> +				flip_scenario_test[index].firstformat,
> +				flip_scenario_test[index].firstmodifier);
> +
> +		setup_fb(data, &data->big_fb,
> +				data->attemptmodewidth * 2,
> +				data->attemptmodeheight * 2,
> +				flip_scenario_test[index].secondformat,
> +				flip_scenario_test[index].secondmodifier);
> +
> +		igt_debug("small fb %dx%d\n", data->small_fb.width,
> +				data->small_fb.height);
> +		igt_debug("big fb %dx%d\n", data->big_fb.width,
> +				data->big_fb.height);
>  	}
>  
>  	igt_output_set_pipe(output, pipe);
> @@ -186,13 +170,26 @@ static void test_flip_to_scaled(data_t *data, uint32_t index, enum pipe pipe,
>  				  NULL);
>  	data->pipe_crc = igt_pipe_crc_new(data->drm_fd, pipe,
>  					  INTEL_PIPE_CRC_SOURCE_AUTO);
> -	igt_pipe_crc_start(data->pipe_crc);
> +
> +	for (int i = 0; i < output->config.connector->count_modes; i++) {
> +		if (output->config.connector->modes[i].hdisplay == data->attemptmodewidth &&
> +		   output->config.connector->modes[i].vdisplay == data->attemptmodeheight) {
> +			modetoset = &output->config.connector->modes[i];
> +			break;
> +		   }
> +	}
> +
> +	if (!modetoset)
> +		igt_debug("%dp mode was not found from connector, will continue with default. This may cause cdclk to fail this test.\n",
> +			  data->attemptmodeheight);
> +	else
> +		igt_output_override_mode(output, modetoset);
>  
>  	igt_plane_set_position(primary, 0, 0);
>  	igt_plane_set_fb(primary, &data->small_fb);
> +	igt_display_commit_atomic(&data->display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
>  
> -	igt_display_commit_atomic(&data->display,
> -				  DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> +	igt_pipe_crc_start(data->pipe_crc);
>  	igt_pipe_crc_get_current(data->drm_fd, data->pipe_crc, &small_crc);
>  
>  	igt_plane_set_fb(primary, &data->big_fb);
> @@ -203,7 +200,7 @@ static void test_flip_to_scaled(data_t *data, uint32_t index, enum pipe pipe,
>  					    DRM_MODE_PAGE_FLIP_EVENT, NULL);
>  
>  	igt_require_f(ret != -ERANGE,
> -		      "Platform scaling limits exceeded, skipping.");
> +		      "Platform scaling limits exceeded, skipping.\n");
>  	igt_assert_eq(ret, 0);
>  
>  	igt_assert(read(data->drm_fd, &ev, sizeof(ev)) == sizeof(ev));
> @@ -230,6 +227,14 @@ igt_main
>  		igt_require(data.display.is_atomic);
>  		igt_require_pipe_crc(data.drm_fd);
>  		kmstest_set_vt_graphics_mode();
> +
> +		if (data.gen < 11) {
> +			data.attemptmodewidth = 640;
> +			data.attemptmodeheight = 480;
> +		} else {
> +			data.attemptmodewidth = 1920;
> +			data.attemptmodeheight = 1080;
> +		}
>  	}
>  
>  	for (int index = 0; index < ARRAY_SIZE(flip_scenario_test); index++) {
> -- 
> 2.28.0
> 
> _______________________________________________
> igt-dev mailing list
> igt-dev at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev


More information about the igt-dev mailing list