[igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc assertion in coverage-vs-premult-vs-none for 6bpc panels

Modem, Bhanuprakash bhanuprakash.modem at intel.com
Thu Jul 8 10:45:14 UTC 2021


> From: igt-dev <igt-dev-bounces at lists.freedesktop.org> On Behalf Of Vidya
> Srinivas
> Sent: Thursday, July 8, 2021 3:01 PM
> To: igt-dev at lists.freedesktop.org
> Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip crc
> assertion in coverage-vs-premult-vs-none for 6bpc panels
> 
> Intel Gen11 platforms using 6bpc panels have dithering ON
> and show CRC mismatch in coverage-vs-premult-vs-none
> Doing a crc based test with dithering is not a great idea as pixels
> will change due to the 8bit to 6bits truncation with dithering.
> 
> This patch skips the CRC assertion for 6bpc panels. Currently, there is no
> better
> way of fetching the bpc info other than EDID or display_info. Currently using
> i915_display_info for the same. Hence restricting the check to i915 devices
> only.
> 
> Credits-to: Uma Shankar <uma.shankar at intel.com>
> Credits-to: Juha-pekka Heikkila <juha-pekka.heikkila at intel.com>
> Credits-to: Modem Bhanuprakash <Bhanuprakash.Modem at intel.com>
> Reviewed-by: Uma Shankar <uma.shankar at intel.com>
> Signed-off-by: Vidya Srinivas <vidya.srinivas at intel.com>
> ---
>  tests/kms_plane_alpha_blend.c | 43 +++++++++++++++++++++++++++++++++--
>  1 file changed, 41 insertions(+), 2 deletions(-)
> 
> diff --git a/tests/kms_plane_alpha_blend.c b/tests/kms_plane_alpha_blend.c
> index a37cb27c7d62..e450e64cb105 100644
> --- a/tests/kms_plane_alpha_blend.c
> +++ b/tests/kms_plane_alpha_blend.c
> @@ -442,10 +442,42 @@ static void coverage_7efc(data_t *data, enum pipe pipe,
> igt_plane_t *plane)
>  	igt_pipe_crc_stop(data->pipe_crc);
>  }
> 
> +static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
> +	char buf[4096];
> +	char *str;
> +	bool ret;
> +	int debugfs_fd;
> +	drmModeConnector *c;
> +	igt_output_t *output = igt_get_single_output_for_pipe(display, pipe);
> +
> +	if (!is_i915_device(display->drm_fd))
> +		return false;
> +
> +	c = output->config.connector;
> +	if (c->connector_type != DRM_MODE_CONNECTOR_eDP)
> +		return false;
> +
> +	debugfs_fd = igt_debugfs_dir(display->drm_fd);
> +	if (debugfs_fd < 0)
> +		return false;
> +
> +	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
> sizeof(buf));
> +
> +	str = strstr(buf, "bpp=");
> +	if (str && (strncmp(str, "bpp=18", 6) == 0))
> +		ret = true;
> +	else
> +		ret = false;
> +
> +	close(debugfs_fd);
> +	return ret;
> +}
> +
>  static void coverage_premult_constant(data_t *data, enum pipe pipe,
> igt_plane_t *plane)
>  {
>  	igt_display_t *display = &data->display;
>  	igt_crc_t ref_crc = {}, crc = {};
> +	bool is6bpc = false;
> 
>  	/* Set a background color on the primary fb for testing */
>  	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
> @@ -461,14 +493,21 @@ static void coverage_premult_constant(data_t *data, enum
> pipe pipe, igt_plane_t
>  	igt_plane_set_fb(plane, &data->argb_fb_7e);
>  	igt_display_commit2(display, COMMIT_ATOMIC);
>  	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
> -	igt_assert_crc_equal(&ref_crc, &crc);
> +
> +	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc
> check */
> +	is6bpc = is_6bpc(display, pipe);
> +	if (is6bpc == false)
> +		igt_assert_crc_equal(&ref_crc, &crc);

We can SKIP here, right? Also no need to run on remaining planes. Otherwise
IGT will report this test result as PASS instead of reporting as SKIP. 

igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");


Also, are we going to skip this test on only gen 11? Then we need a check to
perform such.

if (is_i915_device(fd) && intel_gen(intel_get_drm_devid(fd)) == 11)
	igt_require_f(!is_6bpc(display, pipe), "Skip test on 6 bpc panels\n");

> 
>  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "None");
>  	igt_plane_set_prop_value(plane, IGT_PLANE_ALPHA, 0x7e7e);
>  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
>  	igt_display_commit2(display, COMMIT_ATOMIC);
>  	igt_pipe_crc_get_current(display->drm_fd, data->pipe_crc, &crc);
> -	igt_assert_crc_equal(&ref_crc, &crc);
> +
> +	/* 6bpc panels have dithering ON and CRC might fail, hence skip crc
> check */
> +	if (is6bpc == false)
> +		igt_assert_crc_equal(&ref_crc, &crc);
> 
>  	igt_pipe_crc_stop(data->pipe_crc);
>  }
> --
> 2.32.0
> 
> _______________________________________________
> igt-dev mailing list
> igt-dev at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev


More information about the igt-dev mailing list