[igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

Srinivas, Vidya vidya.srinivas at intel.com
Fri Jul 9 11:34:00 UTC 2021


Hello Bhanu/Uma/Juha-Pekka,

Thank you so much.

Petri, could you kindly help merge this? Thank you so much.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <bhanuprakash.modem at intel.com> 
Sent: Friday, July 9, 2021 4:18 PM
To: Srinivas, Vidya <vidya.srinivas at intel.com>; igt-dev at lists.freedesktop.org
Subject: RE: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip coverage-vs-premult-vs-none for 6bpc panels

> From: igt-dev <igt-dev-bounces at lists.freedesktop.org> On Behalf Of 
> Vidya Srinivas
> Sent: Friday, July 9, 2021 12:28 PM
> To: igt-dev at lists.freedesktop.org
> Subject: [igt-dev] [PATCH i-g-t] tests/kms_plane_alpha_blend: Skip 
> coverage- vs-premult-vs-none for 6bpc panels
> 
> Intel platforms using 6bpc panels have dithering ON and show CRC 
> mismatch in coverage-vs-premult-vs-none Doing a crc based test with 
> dithering is not a great idea as pixels will change due to the 8bit to 
> 6bits truncation with dithering.
> 
> This patch skips the subtest for 6bpc panels. Currently, there is no 
> better way of fetching the bpc info other than EDID or display_info. 
> Currently using i915_display_info for the same. Hence restricting the 
> check to i915 devices only.
> 
> Credits-to: Uma Shankar <uma.shankar at intel.com>
> Credits-to: Juha-pekka Heikkila <juha-pekka.heikkila at intel.com>
> Credits-to: Modem Bhanuprakash <Bhanuprakash.Modem at intel.com>
> Reviewed-by: Uma Shankar <uma.shankar at intel.com>
> Signed-off-by: Vidya Srinivas <vidya.srinivas at intel.com>
> ---
>  tests/kms_plane_alpha_blend.c | 36 
> +++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/tests/kms_plane_alpha_blend.c 
> b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..a3529dc2190f 
> 100644
> --- a/tests/kms_plane_alpha_blend.c
> +++ b/tests/kms_plane_alpha_blend.c
> @@ -442,6 +442,38 @@ static void coverage_7efc(data_t *data, enum pipe 
> pipe, igt_plane_t *plane)
>  	igt_pipe_crc_stop(data->pipe_crc);
>  }
> 
> +static bool is_6bpc(igt_display_t *display, enum pipe pipe) {
> +	char buf[8192];
> +	char *str;
> +	bool ret;
> +	int debugfs_fd;
> +	drmModeConnector *c;
> +	igt_output_t *output = igt_get_single_output_for_pipe(display, 
> +pipe);
> +
> +	if (!is_i915_device(display->drm_fd))
> +		return false;
> +
> +	c = output->config.connector;
> +	if (c->connector_type != DRM_MODE_CONNECTOR_eDP ||
> +		c->connector_type != DRM_MODE_CONNECTOR_DSI)
> +		return false;
> +
> +	debugfs_fd = igt_debugfs_dir(display->drm_fd);
> +	if (debugfs_fd < 0)
> +		return false;
> +
> +	igt_debugfs_simple_read(debugfs_fd, "i915_display_info", buf,
> sizeof(buf));
> +
> +	str = strstr(buf, "bpp=");
> +	if (str && (strncmp(str, "bpp=18", 6) == 0))
> +		ret = true;
> +	else
> +		ret = false;
> +
> +	close(debugfs_fd);
> +	return ret;
> +}
> +
>  static void coverage_premult_constant(data_t *data, enum pipe pipe, 
> igt_plane_t *plane)  {
>  	igt_display_t *display = &data->display; @@ -454,6 +486,10 @@ static 
> void coverage_premult_constant(data_t *data, enum pipe pipe, 
> igt_plane_t
>  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
>  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
>  	igt_display_commit2(display, COMMIT_ATOMIC);
> +
> +	/* 6bpc panels have dithering ON and CRC might fail, hence skip test */
> +	igt_require_f(!is_6bpc(display, pipe), "Test skipped for 6bpc
> panels\n");

LGTM: Acked-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>

> +
>  	igt_pipe_crc_start(data->pipe_crc);
>  	igt_pipe_crc_get_single(data->pipe_crc, &ref_crc);
> 
> --
> 2.32.0
> 
> _______________________________________________
> igt-dev mailing list
> igt-dev at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev


More information about the igt-dev mailing list