[igt-dev] [PATCH i-g-t 11/11] tests/kms_big_fb: Add max hw stride lenght async flip test
venkata.sai.patnana at intel.com
venkata.sai.patnana at intel.com
Wed Jun 9 12:17:33 UTC 2021
From: Juha-Pekka Heikkilä <juha-pekka.heikkila at intel.com>
test async flip with fbs which are using maximum hw supported stride
lenghts. Do crc test flipping between fbs which are having same content
and then async flip fbs with different content.
Cc: Karthik B S <karthik.b.s at intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila at intel.com>
---
tests/kms_big_fb.c | 147 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 140 insertions(+), 7 deletions(-)
diff --git a/tests/kms_big_fb.c b/tests/kms_big_fb.c
index 65565127fd..89ea0f23e2 100644
--- a/tests/kms_big_fb.c
+++ b/tests/kms_big_fb.c
@@ -39,7 +39,7 @@ typedef struct {
igt_output_t *output;
igt_plane_t *plane;
igt_pipe_crc_t *pipe_crc;
- struct igt_fb small_fb, big_fb;
+ struct igt_fb small_fb, big_fb, big_fb_flip[2];
uint32_t format;
uint64_t modifier;
int width, height;
@@ -51,10 +51,13 @@ typedef struct {
struct buf_ops *bops;
struct intel_bb *ibb;
bool max_hw_stride_test;
+ bool async_flip_test;
int hw_stride;
int max_hw_fb_width;
+ double planeclearrgb[3];
uint32_t format_override;
uint32_t stride_override;
+ uint32_t async_flip_support;
} data_t;
static struct intel_buf *init_buf(data_t *data,
@@ -113,7 +116,10 @@ static void setup_fb(data_t *data, struct igt_fb *newfb, uint32_t width,
}
cr = igt_get_cairo_ctx(data->drm_fd, newfb);
- igt_paint_color(cr, 0, 0, newfb->width, newfb->height, 0, 0, 0);
+ igt_paint_color(cr, 0, 0, newfb->width, newfb->height,
+ data->planeclearrgb[0],
+ data->planeclearrgb[1],
+ data->planeclearrgb[2]);
igt_put_cairo_ctx(cr);
igt_assert(drmIoctl(data->drm_fd, LOCAL_DRM_IOCTL_MODE_ADDFB2, &f) == 0);
@@ -243,7 +249,7 @@ static void prep_fb(data_t *data)
if (data->big_fb.fb_id)
return;
- if (data->hw_stride == 0) {
+ if (!data->max_hw_stride_test) {
igt_create_fb(data->drm_fd,
data->big_fb_width, data->big_fb_height,
data->format, data->modifier,
@@ -252,7 +258,7 @@ static void prep_fb(data_t *data)
setup_fb(data, &data->big_fb, data->big_fb_width,
data->big_fb_height, data->format, data->modifier,
data->hw_stride);
- igt_info("using stride length %d\n", data->hw_stride);
+ igt_debug("using stride length %d\n", data->hw_stride);
}
generate_pattern(data, &data->big_fb, 640, 480);
@@ -474,11 +480,107 @@ static bool test_pipe(data_t *data)
return ret;
}
+static bool
+max_hw_stride_async_flip_test(data_t *data)
+{
+ uint32_t ret, startframe;
+ const uint32_t w = data->output->config.default_mode.hdisplay,
+ h = data->output->config.default_mode.vdisplay;
+ igt_plane_t *primary;
+ igt_crc_t compare_crc, async_crc;
+
+ igt_require(data->display.is_atomic);
+ igt_output_set_pipe(data->output, data->pipe);
+
+ primary = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
+
+ if (igt_plane_has_prop(primary, IGT_PLANE_ROTATION))
+ igt_plane_set_rotation(primary, data->rotation);
+
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
+
+ setup_fb(data, &data->big_fb, data->big_fb_width, data->big_fb_height,
+ data->format, data->modifier, data->hw_stride);
+ generate_pattern(data, &data->big_fb, 640, 480);
+
+ data->planeclearrgb[1] = 1.0;
+
+ setup_fb(data, &data->big_fb_flip[0], data->big_fb_width,
+ data->big_fb_height, data->format, data->modifier,
+ data->hw_stride);
+
+ data->planeclearrgb[1] = 0.0;
+
+ setup_fb(data, &data->big_fb_flip[1], data->big_fb_width,
+ data->big_fb_height, data->format, data->modifier,
+ data->hw_stride);
+ generate_pattern(data, &data->big_fb_flip[1], 640, 480);
+
+ data->pipe_crc = igt_pipe_crc_new(data->drm_fd, data->pipe,
+ INTEL_PIPE_CRC_SOURCE_AUTO);
+ igt_pipe_crc_start(data->pipe_crc);
+
+ igt_set_timeout(5, "Async pageflipping loop got stuck!\n");
+ for (int i = 0; i < 2; i++) {
+ igt_plane_set_fb(primary, &data->big_fb);
+ igt_fb_set_size(&data->big_fb, primary, w, h);
+ igt_plane_set_size(primary, w, h);
+ igt_display_commit_atomic(&data->display,
+ DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+
+ igt_wait_for_vblank(data->drm_fd, data->display.pipes[primary->pipe->pipe].crtc_offset);
+ startframe = kmstest_get_vblank(data->drm_fd, data->pipe, 0) + 1;
+
+ for (int j = 0; j < 2; j++) {
+ do {
+ ret = drmModePageFlip(data->drm_fd, data->output->config.crtc->crtc_id,
+ data->big_fb_flip[i].fb_id,
+ DRM_MODE_PAGE_FLIP_ASYNC, NULL);
+ } while (ret == -EBUSY);
+ igt_assert(ret == 0);
+
+ do {
+ ret = drmModePageFlip(data->drm_fd, data->output->config.crtc->crtc_id,
+ data->big_fb.fb_id,
+ DRM_MODE_PAGE_FLIP_ASYNC, NULL);
+ } while (ret == -EBUSY);
+ igt_assert(ret == 0);
+ }
+
+ igt_pipe_crc_get_for_frame(data->drm_fd, data->pipe_crc,
+ startframe, &compare_crc);
+ igt_pipe_crc_get_for_frame(data->drm_fd, data->pipe_crc,
+ startframe + 1, &async_crc);
+
+ igt_assert_f(kmstest_get_vblank(data->drm_fd, data->pipe, 0) -
+ startframe == 1, "lost frames\n");
+
+ igt_assert_f(igt_check_crc_equal(&compare_crc, &async_crc)^(i^1),
+ "CRC failure with async flip, crc %s match for checked round\n",
+ i?"should":"shouldn't");
+ }
+ igt_reset_timeout();
+
+ igt_pipe_crc_free(data->pipe_crc);
+ igt_output_set_pipe(data->output, PIPE_NONE);
+ igt_remove_fb(data->drm_fd, &data->big_fb);
+ igt_remove_fb(data->drm_fd, &data->big_fb_flip[0]);
+ igt_remove_fb(data->drm_fd, &data->big_fb_flip[1]);
+ return true;
+}
+
static void test_scanout(data_t *data)
{
+ igt_output_t *output;
+
if (data->max_hw_stride_test) {
data->big_fb_width = data->max_hw_fb_width;
- data->big_fb_height = data->max_hw_fb_width;
+ data->big_fb_height = 0;
+
+ for_each_connected_output(&data->display, output) {
+ if (data->big_fb_height < output->config.default_mode.vdisplay * 2)
+ data->big_fb_height = output->config.default_mode.vdisplay * 2;
+ }
} else {
data->big_fb_width = data->max_fb_width;
data->big_fb_height = data->max_fb_height;
@@ -488,8 +590,13 @@ static void test_scanout(data_t *data)
data->format, data->modifier);
for_each_pipe_with_valid_output(&data->display, data->pipe, data->output) {
- if (test_pipe(data))
- return;
+ if (data->async_flip_test) {
+ if (max_hw_stride_async_flip_test(data))
+ return;
+ } else {
+ if (test_pipe(data))
+ return;
+ }
break;
}
@@ -699,6 +806,7 @@ igt_main
{
igt_fixture {
drmModeResPtr res;
+ struct drm_get_cap cap = { .capability = DRM_CAP_ASYNC_PAGE_FLIP };
data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
@@ -743,7 +851,15 @@ igt_main
data.bops = buf_ops_create(data.drm_fd);
data.ibb = intel_bb_create(data.drm_fd, 4096);
+ data.planeclearrgb[0] = 0.0;
+ data.planeclearrgb[1] = 0.0;
+ data.planeclearrgb[2] = 0.0;
+
data.max_hw_stride_test = false;
+ data.async_flip_test = false;
+
+ igt_ioctl(data.drm_fd, DRM_IOCTL_GET_CAP, &cap);
+ data.async_flip_support = cap.value;
}
/*
@@ -861,6 +977,23 @@ igt_main
igt_require(igt_display_has_format_mod(&data.display, data.format, data.modifier));
test_scanout(&data);
}
+
+ // async flip doesn't support linear fbs.
+ if (modifiers[i].modifier == DRM_FORMAT_MOD_LINEAR)
+ continue;
+
+ data.async_flip_test = true;
+ igt_describe("test async flip on maximum hardware supported stride length for given bpp and modifiers.");
+ igt_subtest_f("%s-max-hw-stride-%dbpp-rotate-%d%s-async-flip", modifiers[i].name,
+ formats[j].bpp, rotations[k].angle, fliptab[l].flipname) {
+ igt_require(data.format == DRM_FORMAT_C8 ||
+ igt_fb_supported_format(data.format));
+ igt_require(igt_display_has_format_mod(&data.display, data.format, data.modifier));
+ igt_require_f(data.async_flip_support, "Async Flip is not supported\n");
+ data.max_hw_fb_width = min(data.hw_stride / (formats[j].bpp >> 3), data.max_fb_width);
+ test_scanout(&data);
+ }
+ data.async_flip_test = false;
}
igt_fixture
--
2.25.1
More information about the igt-dev
mailing list