[igt-dev] [PATCH i-g-t] tests/kms_big_fb: Use igt_pipe_crc_get_current instead of igt_pipe_crc_collect_crc
Srinivas, Vidya
vidya.srinivas at intel.com
Thu Jun 10 08:53:44 UTC 2021
Hello Juha-Pekka,
Thank you so much.
Regards
Vidya
-----Original Message-----
From: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
Sent: Thursday, June 10, 2021 2:22 PM
To: Srinivas, Vidya <vidya.srinivas at intel.com>; igt-dev at lists.freedesktop.org
Cc: markyacoub at chromium.org; Almahallawy, Khaled <khaled.almahallawy at intel.com>; Lin, Charlton <charlton.lin at intel.com>; Latvala, Petri <petri.latvala at intel.com>; Modem, Bhanuprakash <bhanuprakash.modem at intel.com>; Shankar, Uma <uma.shankar at intel.com>
Subject: Re: [PATCH i-g-t] tests/kms_big_fb: Use igt_pipe_crc_get_current instead of igt_pipe_crc_collect_crc
Results look ok, there show one new fifo underrun on glk but I don't think it is caused by your change.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
On 8.6.2021 12.05, Vidya Srinivas wrote:
> CRC mismatch is seen between big and small CRC on
> Gen11 systems for subtest y-tiled-32bpp-rotate-0.
> Patch changes igt_pipe_crc_collect_crc to igt_pipe_crc_get_current for
> collecting CRC for big and small fb to compare.
>
> Signed-off-by: Vidya Srinivas <vidya.srinivas at intel.com>
> Change-Id: Ie913127f149f577ab0a034dcbbd4314af17cad52
> ---
> tests/kms_big_fb.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/tests/kms_big_fb.c b/tests/kms_big_fb.c index
> b35727a09bd0..ea12a34157f2 100644
> --- a/tests/kms_big_fb.c
> +++ b/tests/kms_big_fb.c
> @@ -331,14 +331,13 @@ static bool test_plane(data_t *data)
> * rendering pipeline introduces slight differences into
> * the result if we try that, and so the crc will not match.
> */
> + igt_pipe_crc_start(data->pipe_crc);
> copy_pattern(data, small_fb, 0, 0, big_fb, x, y,
> small_fb->width, small_fb->height);
>
> igt_display_commit2(&data->display, data->display.is_atomic ?
> COMMIT_ATOMIC : COMMIT_UNIVERSAL);
> -
> -
> - igt_pipe_crc_collect_crc(data->pipe_crc, &small_crc);
> + igt_pipe_crc_get_current(data->display.drm_fd, data->pipe_crc,
> +&small_crc);
>
> igt_plane_set_fb(plane, big_fb);
> igt_fb_set_position(big_fb, plane, x, y); @@ -347,11 +346,12 @@
> static bool test_plane(data_t *data)
> igt_display_commit2(&data->display, data->display.is_atomic ?
> COMMIT_ATOMIC : COMMIT_UNIVERSAL);
>
> - igt_pipe_crc_collect_crc(data->pipe_crc, &big_crc);
> + igt_pipe_crc_get_current(data->display.drm_fd, data->pipe_crc,
> +&big_crc);
>
> igt_plane_set_fb(plane, NULL);
>
> igt_assert_crc_equal(&big_crc, &small_crc);
> + igt_pipe_crc_stop(data->pipe_crc);
> }
>
> return true;
>
More information about the igt-dev
mailing list