[igt-dev] [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

[Srinivas, Vidya]

Hello Bhanu,

I have uploaded version 3 where I have not removed primary plane.
Instead I have added a commit of the primary plane and I have changed alpha.
This passes on Gen11 systems.

Kindly check https://patchwork.freedesktop.org/patch/438831/?series=90828&rev=3 and suggest.

Thank you so much.

Regards
Vidya

-----Original Message-----
From: Srinivas, Vidya 
Sent: Friday, June 11, 2021 1:00 PM
To: Modem, Bhanuprakash <Bhanuprakash.Modem at intel.com>; intel-gfx at lists.freedesktop.org; igt-dev at lists.freedesktop.org
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

Thank you Bhanu. This test is failing on all planes > 0. Only plane 0 passes.
If I skip plane 1, it fails on 2 and so on.
Changing the way CRC is being collected also is not helping. Adding vblank is also not helping.

Regards
Vidya

-----Original Message-----
From: Modem, Bhanuprakash <bhanuprakash.modem at intel.com>
Sent: Friday, June 11, 2021 9:11 AM
To: Srinivas, Vidya <vidya.srinivas at intel.com>; intel-gfx at lists.freedesktop.org; igt-dev at lists.freedesktop.org
Subject: RE: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: Don't set primary fb color in coverage-vs-premult-vs-constant

> From: Intel-gfx <intel-gfx-bounces at lists.freedesktop.org> On Behalf Of 
> Vidya Srinivas
> Sent: Tuesday, June 1, 2021 7:38 PM
> To: intel-gfx at lists.freedesktop.org; igt-dev at lists.freedesktop.org
> Subject: [Intel-gfx] [PATCH i-g-t] [RFC] tests/kms_plane_alpha_blend: 
> Don't set primary fb color in coverage-vs-premult-vs-constant
> 
> Patch removes setting primary fb color in 
> coverage-vs-premult-vs-constant as this is causing CRC mismatch on few Gen11 systems.

I am not sure how Primary plane's bg color causing CRC mismatch.
Also, as this test runs on all planes (those are having the props "alpha" and "pixel blend mode"), is this test failing on a particular plane?

- Bhanu

> Similar change has already been done in tests constant_alpha_min and 
> basic_alpha where the test runs on all planes but dont set the primary 
> fb color.
> 
> Signed-off-by: Vidya Srinivas <vidya.srinivas at intel.com>
> ---
>  tests/kms_plane_alpha_blend.c | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/tests/kms_plane_alpha_blend.c 
> b/tests/kms_plane_alpha_blend.c index a37cb27c7d62..224d79bd1749
> 100644
> --- a/tests/kms_plane_alpha_blend.c
> +++ b/tests/kms_plane_alpha_blend.c
> @@ -447,10 +447,6 @@ static void coverage_premult_constant(data_t 
> *data, enum pipe pipe, igt_plane_t
>  	igt_display_t *display = &data->display;
>  	igt_crc_t ref_crc = {}, crc = {};
> 
> -	/* Set a background color on the primary fb for testing */
> -	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
> -		igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe],
> DRM_PLANE_TYPE_PRIMARY), &data->gray_fb);
> -
>  	igt_plane_set_prop_enum(plane, IGT_PLANE_PIXEL_BLEND_MODE, "Coverage");
>  	igt_plane_set_fb(plane, &data->argb_fb_cov_7e);
>  	igt_display_commit2(display, COMMIT_ATOMIC);
> --
> 2.7.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx