[igt-dev] [PATCH i-g-t 1/5] tests/kms_dp_dsc: Add a subtest to force DSC output BPP
Navare, Manasi
manasi.d.navare at intel.com
Wed Jun 23 22:56:04 UTC 2021
On Tue, Jun 22, 2021 at 03:54:50PM +0530, venkata.sai.patnana at intel.com wrote:
> From: Patnana Venkata Sai <venkata.sai.patnana at intel.com>
>
> This subtest uses the accepted DSC BPPs and tries to
> force a modeset by setting a certain BPP as the output
> BPP for a connector.
>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> Signed-off-by: Karthik B S <karthik.b.s at intel.com>
> Cc: Karthik B S <karthik.b.s at intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Cc: Navare Manasi D <manasi.d.navare at intel.com>
> Signed-off-by: Petri Latvala <petri.latvala at intel.com>
> Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana at intel.com>
> ---
> tests/kms_dp_dsc.c | 181 ++++++++++++++++++++++++++++-----------------
> 1 file changed, 113 insertions(+), 68 deletions(-)
>
> diff --git a/tests/kms_dp_dsc.c b/tests/kms_dp_dsc.c
> index ad5e5142..2b536a14 100644
> --- a/tests/kms_dp_dsc.c
> +++ b/tests/kms_dp_dsc.c
> @@ -44,15 +44,19 @@
> #include <fcntl.h>
> #include <termios.h>
>
> +/* currently dsc compression is verifying on 8bpc frame only */
> +#define DRM_FORMAT_BPC 8
Since we are testing this on DISP >= 13, why not test for all supported input BPCs : 10, 12 as well?
That can be in the subsequent patches though, for this patch everything looks good
Reviewed-by: Manasi Navare <manasi.d.navare at intel.com>
Manasi
> +
> enum dsc_test_type
> {
> - test_basic_dsc_enable
> + test_basic_dsc_enable,
> + test_dsc_compression_bpp
> };
>
> typedef struct {
> int drm_fd;
> int debugfs_fd;
> - uint32_t id;
> + uint32_t devid;
> igt_display_t display;
> struct igt_fb fb_test_pattern;
> igt_output_t *output;
> @@ -61,6 +65,7 @@ typedef struct {
> drmModeConnector *connector;
> drmModeEncoder *encoder;
> int crtc;
> + int compression_bpp;
> enum pipe pipe;
> char conn_name[128];
> } data_t;
> @@ -123,6 +128,22 @@ static void force_dp_dsc_enable(data_t *data)
> igt_assert_f(ret > 0, "debugfs_write failed");
> }
>
> +static void force_dp_dsc_enable_bpp(data_t *data)
> +{
> + int ret;
> + char file_name[128] = {0};
> + char buffer[20];
> +
> + sprintf(buffer, "%d", data->compression_bpp);
> + strcpy(file_name, data->conn_name);
> + strcat(file_name, "/i915_dsc_bpp_support");
> + igt_debug("Forcing DSC BPP to %d on %s\n",
> + data->compression_bpp, data->conn_name);
> + ret = igt_sysfs_write(data->debugfs_fd, file_name,
> + buffer, sizeof(buffer));
> + igt_assert_f(ret > 0, "debugfs_write failed");
> +}
> +
> static bool is_force_dsc_enabled(data_t *data)
> {
> char file_name[128] = {0};
> @@ -176,6 +197,37 @@ static void kms_dp_dsc_exit_handler(int sig)
> restore_force_dsc_en();
> }
>
> +static bool check_dsc_on_connector(data_t *data, uint32_t drmConnector)
> +{
> + drmModeConnector *connector;
> + igt_output_t *output;
> +
> + connector = drmModeGetConnectorCurrent(data->drm_fd,
> + drmConnector);
> + if (connector->connection != DRM_MODE_CONNECTED ||
> + ((connector->connector_type != DRM_MODE_CONNECTOR_eDP) &&
> + (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort)))
> + return false;
> +
> + output = igt_output_from_connector(&data->display, connector);
> + sprintf(data->conn_name, "%s-%d",
> + kmstest_connector_type_str(connector->connector_type),
> + connector->connector_type_id);
> +
> + if (!is_dp_dsc_supported(data)) {
> + igt_debug("DSC not supported on connector %s\n",
> + data->conn_name);
> + return false;
> + }
> + if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
> + !is_dp_fec_supported(data)) {
> + igt_debug("DSC cannot be enabled without FEC on %s\n",
> + data->conn_name);
> + return false;
> + }
> + data->output = output;
> + return true;
> +}
>
> /*
> * Re-probe connectors and do a modeset with DSC
> @@ -183,6 +235,7 @@ static void kms_dp_dsc_exit_handler(int sig)
> */
> static void update_display(data_t *data, enum dsc_test_type test_type)
> {
> + bool enabled;
> igt_plane_t *primary;
> data->connector = data->output->config.connector;
>
> @@ -190,37 +243,35 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
> igt_output_set_pipe(data->output, PIPE_NONE);
> igt_display_commit(&data->display);
>
> - if (test_type == test_basic_dsc_enable) {
> - bool enabled;
> + igt_debug("DSC is supported on %s\n", data->conn_name);
> + save_force_dsc_en(data);
> + force_dp_dsc_enable(data);
> + if (test_type == test_dsc_compression_bpp) {
> + igt_debug("Trying to set BPP to %d\n", data->compression_bpp);
> + force_dp_dsc_enable_bpp(data);
> + }
>
> - igt_debug("DSC is supported on %s\n", data->conn_name);
> - save_force_dsc_en(data);
> - force_dp_dsc_enable(data);
> + igt_output_set_pipe(data->output, data->pipe);
> + primary = igt_output_get_plane_type(data->output,
> + DRM_PLANE_TYPE_PRIMARY);
>
> - igt_output_set_pipe(data->output, data->pipe);
> - primary = igt_output_get_plane_type(data->output,
> - DRM_PLANE_TYPE_PRIMARY);
> + /* Now set the output to the desired mode */
> + igt_plane_set_fb(primary, &data->fb_test_pattern);
> + igt_display_commit(&data->display);
>
> - /* Now set the output to the desired mode */
> - igt_plane_set_fb(primary, &data->fb_test_pattern);
> - igt_display_commit(&data->display);
> + /*
> + * Until we have CRC check support, manually check if RGB test
> + * pattern has no corruption.
> + */
> + manual("RGB test pattern without corruption");
>
> - /*
> - * Until we have CRC check support, manually check if RGB test
> - * pattern has no corruption.
> - */
> - manual("RGB test pattern without corruption");
> -
> - enabled = is_dp_dsc_enabled(data);
> - restore_force_dsc_en();
> -
> - igt_assert_f(enabled,
> - "Default DSC enable failed on Connector: %s Pipe: %s\n",
> - data->conn_name,
> - kmstest_pipe_name(data->pipe));
> - } else {
> - igt_assert(!"Unknown test type\n");
> - }
> + enabled = is_dp_dsc_enabled(data);
> + restore_force_dsc_en();
> +
> + igt_assert_f(enabled,
> + "Default DSC enable failed on Connector: %s Pipe: %s\n",
> + data->conn_name,
> + kmstest_pipe_name(data->pipe));
> }
>
> static void run_test(data_t *data, igt_output_t *output,
> @@ -246,12 +297,16 @@ static void run_test(data_t *data, igt_output_t *output,
> }
> }
>
> - if (igt_pipe_connector_valid(pipe, output)) {
> - data->pipe = pipe;
> - data->output = output;
> - update_display(data, test_type);
> - test_cleanup(data);
> - }
> + igt_dynamic_f("%s-pipe-%s", output->name, kmstest_pipe_name(pipe))
> + if (igt_pipe_connector_valid(pipe, output)) {
> + data->pipe = pipe;
> + data->output = output;
> + update_display(data, test_type);
> + test_cleanup(data);
> + }
> +
> + if (test_type == test_dsc_compression_bpp)
> + break;
> }
>
> igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
> @@ -260,59 +315,49 @@ static void run_test(data_t *data, igt_output_t *output,
> igt_main
> {
> data_t data = {};
> - igt_output_t *output;
> drmModeRes *res;
> drmModeConnector *connector = NULL;
> - int i, test_conn_cnt, test_cnt;
> - int tests[] = {DRM_MODE_CONNECTOR_eDP, DRM_MODE_CONNECTOR_DisplayPort};
> -
> + int i, j, test_conn_cnt;
> igt_fixture {
> data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> + igt_require_intel(data.drm_fd);
> + data.devid = intel_get_drm_devid(data.drm_fd);
> data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
> kmstest_set_vt_graphics_mode();
> igt_install_exit_handler(kms_dp_dsc_exit_handler);
> igt_display_require(&data.display, data.drm_fd);
> igt_require(res = drmModeGetResources(data.drm_fd));
> }
> -
> - for (test_cnt = 0; test_cnt < ARRAY_SIZE(tests); test_cnt++) {
> - igt_describe("Validate display stream compression functionality if supported on "
> - "DP/eDP connector");
> - igt_subtest_f("basic-dsc-enable-%s",
> - kmstest_connector_type_str(tests[test_cnt])) {
> + igt_subtest_with_dynamic("basic-dsc-enable") {
> + test_conn_cnt = 0;
> + for (j = 0; j < res->count_connectors; j++) {
> + if (!check_dsc_on_connector(&data, res->connectors[j]))
> + continue;
> + test_conn_cnt++;
> + run_test(&data, data.output, test_basic_dsc_enable);
> + }
> + igt_skip_on_f(test_conn_cnt == 0, "DSC not supported on any connector\n");
> + }
> + /* currently we are validating compression bpp on XRGB8888 format only */
> + for (i = DRM_FORMAT_BPC; i <= ((DRM_FORMAT_BPC*3)-1); i++) {
> + igt_subtest_with_dynamic_f("dsc-%dbpp-compression-XRGB8888", i) {
> test_conn_cnt = 0;
> - for (i = 0; i < res->count_connectors; i++) {
> - connector = drmModeGetConnectorCurrent(data.drm_fd,
> - res->connectors[i]);
> - if (connector->connection != DRM_MODE_CONNECTED ||
> - connector->connector_type !=
> - tests[test_cnt])
> - continue;
> - output = igt_output_from_connector(&data.display, connector);
> - sprintf(data.conn_name, "%s-%d",
> - kmstest_connector_type_str(connector->connector_type),
> - connector->connector_type_id);
> - if(!is_dp_dsc_supported(&data)) {
> - igt_debug("DSC not supported on connector %s \n",
> - data.conn_name);
> - continue;
> - }
> - if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
> - !is_dp_fec_supported(&data)) {
> - igt_debug("DSC cannot be enabled without FEC on %s\n",
> - data.conn_name);
> + data.compression_bpp = i;
> + igt_require(intel_display_ver(data.devid) >= 13);
> + for (j = 0; j < res->count_connectors; j++) {
> + if (!check_dsc_on_connector(&data, res->connectors[j]))
> continue;
> - }
> test_conn_cnt++;
> - run_test(&data, output, test_basic_dsc_enable);
> + run_test(&data, data.output, test_dsc_compression_bpp);
> }
> - igt_skip_on(test_conn_cnt == 0);
> + igt_skip_on_f(test_conn_cnt == 0, "DSC not supported on any connector\n");
> }
> }
>
> igt_fixture {
> if (connector)
> drmModeFreeConnector(connector);
> + test_cleanup(&data);
> drmModeFreeResources(res);
> close(data.debugfs_fd);
> close(data.drm_fd);
> --
> 2.32.0
>
More information about the igt-dev
mailing list