[igt-dev] [PATCH i-g-t v11] tests/i915/i915_pm_dc: Add DC9 igt test

[Jigar Bhatt]

DC9 igt test validation depends on DC{5,6} counters reset.
When Display Engine enters to DC9, it resets DMC f/w and DC5/DC6 counter.
We don't have a DC9 counter unlike DC{5,6},
therefore this tests uses DC{5,6} counter reset method to validate DC9.

v11 :
- Changing title.

v10: [Anshuman]
- Revert the function name with check_dc9() only.

v9: [Anshuman]
- Change function name check_dc9() to dc9_failed().

v8: [Anshuman]
- Add support_dc6() to check whether a platform supports dc6.

v7: [Anshuman]
- Skip if no support of DC6.

v6: [Anshuman]
- assert for DC6 counter in setup_dc9_dpms.
- Move  dpms_off() to test_dc9_dpms().

Signed-off-by: Jigar Bhatt <jigar.bhatt at intel.com>
---
 tests/i915/i915_pm_dc.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c
index 30c6024..f5ea278 100644
--- a/tests/i915/i915_pm_dc.c
+++ b/tests/i915/i915_pm_dc.c
@@ -384,6 +384,52 @@ static void test_dc_state_dpms(data_t *data, int dc_flag)
 	cleanup_dc_dpms(data);
 }
 
+static bool support_dc6(int debugfs_fd)
+{
+       char buf[4096];
+
+       igt_debugfs_simple_read(debugfs_fd, "i915_dmc_info",
+			       buf, sizeof(buf));
+       return strstr(buf, "DC5 -> DC6 count");
+}
+
+static bool check_dc9(uint32_t debugfs_fd, int prev_dc, bool dc6_supported, int seconds)
+{
+/*
+ * Since we do not have DC9 Counter,
+ * So we rely on dc5/dc6 counter reset to check if Display Engine was in DC9.
+ */
+       return igt_wait(dc6_supported ? read_dc_counter(debugfs_fd, CHECK_DC6) <
+		       prev_dc : read_dc_counter(debugfs_fd, CHECK_DC5) <
+		       prev_dc, seconds, 100);
+}
+
+static void setup_dc9_dpms(data_t *data, int prev_dc, bool dc6_supported)
+{
+       setup_dc_dpms(data);
+       dpms_off(data);
+       igt_skip_on_f(!(igt_wait(dc6_supported ? read_dc_counter(data->debugfs_fd, CHECK_DC6) >
+				 prev_dc : read_dc_counter(data->debugfs_fd, CHECK_DC5) >
+				 prev_dc, 3000, 100)), "Unable to enters shallow DC states\n");
+       dpms_on(data);
+       cleanup_dc_dpms(data);
+}
+
+static void test_dc9_dpms(data_t *data)
+{
+       require_dc_counter(data->debugfs_fd, CHECK_DC5);
+       bool dc6_supported = support_dc6(data->debugfs_fd);
+
+       setup_dc9_dpms(data, dc6_supported ? read_dc_counter(data->debugfs_fd, CHECK_DC6) :
+		       read_dc_counter(data->debugfs_fd, CHECK_DC5), dc6_supported);
+       dpms_off(data);
+       igt_assert_f(check_dc9(data->debugfs_fd, dc6_supported ?
+			       read_dc_counter(data->debugfs_fd, CHECK_DC6) :
+			       read_dc_counter(data->debugfs_fd, CHECK_DC5),
+			       dc6_supported, 3000), "Not in DC9\n");
+       dpms_on(data);
+}
+
 IGT_TEST_DESCRIPTION("These tests validate Display Power DC states");
 int main(int argc, char *argv[])
 {
@@ -449,6 +495,13 @@ int main(int argc, char *argv[])
 		test_dc_state_dpms(&data, CHECK_DC6);
 	}
 
+	igt_describe("This test validates display engine entry to DC9 state");
+	igt_subtest("dc9-dpms") {
+	       igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
+			       "PC8+ residencies not supported\n");
+	       test_dc9_dpms(&data);
+       }
+
 	igt_fixture {
 		free(data.pwr_dmn_info);
 		close(data.debugfs_fd);
-- 
2.8.1