[igt-dev] [i-g-t 06/14] tests/kms_color: New subtests for Plane CTM
Harry Wentland
harry.wentland at amd.com
Fri Nov 26 16:55:04 UTC 2021
On 2021-11-15 04:47, Bhanuprakash Modem wrote:
> To verify plane CTM, draw 3 rectangles using before colors with the
> ctm matrix applied and verify the CRC is equal to using after colors
> with an identify ctm matrix.
>
> Cc: Harry Wentland <harry.wentland at amd.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
> Cc: Uma Shankar <uma.shankar at intel.com>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> ---
> tests/kms_color.c | 225 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 225 insertions(+)
>
> diff --git a/tests/kms_color.c b/tests/kms_color.c
> index 920a5eaadd..e14b37cb6f 100644
> --- a/tests/kms_color.c
> +++ b/tests/kms_color.c
> @@ -53,6 +53,77 @@ static bool is_valid_plane(igt_plane_t *plane)
> return index >= 0 && index < MAX_SUPPORTED_PLANES;
> }
>
> +struct {
> + const char *test_name;
> + int iter;
> + color_t expected_colors[3];
> + double ctm[9];
> +} ctm_tests[] = {
> + {"plane-ctm-red-to-blue", 0,
> + {{ 0.0, 0.0, 1.0 },
> + { 0.0, 1.0, 0.0 },
> + { 0.0, 0.0, 1.0 }},
> + { 0.0, 0.0, 0.0,
> + 0.0, 1.0, 0.0,
> + 1.0, 0.0, 1.0 },
> + },
> + {"plane-ctm-green-to-red", 0,
> + {{ 1.0, 0.0, 0.0 },
> + { 1.0, 0.0, 0.0 },
> + { 0.0, 0.0, 1.0 }},
> + { 1.0, 1.0, 0.0,
> + 0.0, 0.0, 0.0,
> + 0.0, 0.0, 1.0 },
> + },
> + {"plane-ctm-blue-to-red", 0,
> + {{ 1.0, 0.0, 0.0 },
> + { 0.0, 1.0, 0.0 },
> + { 1.0, 0.0, 0.0 }},
> + { 1.0, 0.0, 1.0,
> + 0.0, 1.0, 0.0,
> + 0.0, 0.0, 0.0 },
> + },
> + {"plane-ctm-max", 0,
> + {{ 1.0, 0.0, 0.0 },
> + { 0.0, 1.0, 0.0 },
> + { 0.0, 0.0, 1.0 }},
> + { 100.0, 0.0, 0.0,
> + 0.0, 100.0, 0.0,
> + 0.0, 0.0, 100.0 },
> + },
> + {"plane-ctm-negative", 0,
> + {{ 0.0, 0.0, 0.0 },
> + { 0.0, 0.0, 0.0 },
> + { 0.0, 0.0, 0.0 }},
> + { -1.0, 0.0, 0.0,
> + 0.0, -1.0, 0.0,
> + 0.0, 0.0, -1.0 },
> + },
> + /* We tests a few values around the expected result because
> + * it depends on the hardware we're dealing with, we can
> + * either get clamped or rounded values and we also need to
> + * account for odd number of items in the LUTs.
> + */
> + {"plane-ctm-0-25", 5,
> + {{ 0.0, }, { 0.0, }, { 0.0, }},
> + { 0.25, 0.0, 0.0,
> + 0.0, 0.25, 0.0,
> + 0.0, 0.0, 0.25 },
> + },
> + {"plane-ctm-0-50", 5,
> + {{ 0.0, }, { 0.0, }, { 0.0, }},
> + { 0.5, 0.0, 0.0,
> + 0.0, 0.5, 0.0,
> + 0.0, 0.0, 0.5 },
> + },
> + {"plane-ctm-0-75", 7,
> + {{ 0.0, }, { 0.0, }, { 0.0, }},
> + { 0.75, 0.0, 0.0,
> + 0.0, 0.75, 0.0,
> + 0.0, 0.0, 0.75 },
> + },
> +};
> +
> static void test_pipe_degamma(data_t *data,
> igt_plane_t *primary)
> {
> @@ -900,6 +971,99 @@ static bool plane_degamma_test(data_t *data, igt_plane_t *plane)
> return ret;
> }
>
> +static bool test_plane_ctm(data_t *data,
> + igt_plane_t *plane,
> + color_t *before,
> + color_t *after,
> + double *ctm_matrix)
> +{
> + const double ctm_identity[] = {
> + 1.0, 0.0, 0.0,
> + 0.0, 1.0, 0.0,
> + 0.0, 0.0, 1.0
> + };
> + igt_output_t *output;
> + igt_display_t *display = &data->display;
> + drmModeModeInfo *mode;
> + struct igt_fb fb;
> + igt_crc_t crc_software, crc_hardware;
> + igt_pipe_crc_t *pipe_crc = NULL;
> + bool ret = true;
> +
> + igt_info("Plane CTM test is running on pipe-%s plane-%s(%s)\n",
> + kmstest_pipe_name(plane->pipe->pipe),
> + kmstest_plane_type_name(plane->type),
> + is_hdr_plane(plane) ? "hdr":"sdr");
> +
> + igt_require(igt_plane_has_prop(plane, IGT_PLANE_CTM));
> +
> + pipe_crc = igt_pipe_crc_new(data->drm_fd,
> + plane->pipe->pipe,
> + INTEL_PIPE_CRC_SOURCE_AUTO);
> +
> + output = igt_get_single_output_for_pipe(display, plane->pipe->pipe);
> + igt_assert(output);
> +
> + igt_output_set_pipe(output, plane->pipe->pipe);
> + mode = igt_output_get_mode(output);
> +
> + /* Create a framebuffer at the size of the output. */
> + igt_assert(igt_create_fb(data->drm_fd,
> + mode->hdisplay,
> + mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_MOD_LINEAR,
> + &fb));
> +
> + igt_plane_set_fb(plane, &fb);
> +
> + /* Disable Pipe color props. */
> + disable_degamma(plane->pipe);
> + disable_gamma(plane->pipe);
> + disable_ctm(plane->pipe);
> +
> + disable_plane_gamma(plane);
> + disable_plane_degamma(plane);
> + igt_display_commit2(display, display->is_atomic ?
> + COMMIT_ATOMIC : COMMIT_LEGACY);
> +
> + /* Without CTM transformation. */
> + paint_rectangles(data, mode, after, &fb);
> + igt_plane_set_fb(plane, &fb);
> + set_plane_ctm(plane, ctm_identity);
> + igt_display_commit2(display, display->is_atomic ?
> + COMMIT_ATOMIC : COMMIT_LEGACY);
> + igt_wait_for_vblank(data->drm_fd,
> + display->pipes[plane->pipe->pipe].crtc_offset);
> + igt_pipe_crc_collect_crc(pipe_crc, &crc_software);
> +
> + /* With CTM transformation. */
> + paint_rectangles(data, mode, before, &fb);
> + igt_plane_set_fb(plane, &fb);
> + set_plane_ctm(plane, ctm_matrix);
> + igt_display_commit2(display, display->is_atomic ?
> + COMMIT_ATOMIC : COMMIT_LEGACY);
> + igt_wait_for_vblank(data->drm_fd,
> + display->pipes[plane->pipe->pipe].crtc_offset);
> + igt_pipe_crc_collect_crc(pipe_crc, &crc_hardware);
> +
> + /* Verify that the CRC of the software computed ouutput
> + * is equal to the CRC of the CTM matrix transformation
> + * output.
> + */
> + ret = igt_check_crc_equal(&crc_software, &crc_hardware);
> +
> + disable_plane_ctm(plane);
> + igt_plane_set_fb(plane, NULL);
> + igt_output_set_pipe(output, PIPE_NONE);
> + igt_display_commit2(display, display->is_atomic ?
> + COMMIT_ATOMIC : COMMIT_LEGACY);
> +
> + igt_pipe_crc_free(pipe_crc);
> +
> + return ret;
> +}
> +
> static void
> prep_pipe(data_t *data, enum pipe p)
> {
> @@ -1169,8 +1333,57 @@ static void run_plane_color_test(data_t *data, enum pipe pipe, test_t test)
> igt_require_f(count, "No valid planes found.\n");
> }
>
> +static void run_plane_ctm_test(data_t *data,
> + enum pipe pipe,
> + color_t *expected,
> + double *ctm,
> + int iter)
> +{
> + igt_plane_t *plane;
> + bool result;
> + int i, count = 0;
> + double delta = 1.0 / (1 << 8);
> + color_t red_green_blue[] = {
> + { 1.0, 0.0, 0.0 },
> + { 0.0, 1.0, 0.0 },
> + { 0.0, 0.0, 1.0 }
> + };
> +
> + for_each_plane_on_pipe(&data->display, pipe, plane) {
> + if (!is_valid_plane(plane))
> + continue;
> +
> + result = false;
> +
> + if (!iter)
> + result |= test_plane_ctm(data, plane,
> + red_green_blue, expected,
> + ctm);
> +
> + for (i = 0; i < iter; i++) {
> + expected[0].r =
> + expected[1].g =
> + expected[2].b =
> + ctm[0] + delta * (i - (iter/2));
> +
This bracketing likely depends closely on HW. I am curious if we
can get this to work on various HW.
Harry
> + result |= test_plane_ctm(data, plane,
> + red_green_blue, expected,
> + ctm);
> + if (result)
> + break;
> + }
> +
> + igt_assert(result);
> + count++;
> + }
> +
> + igt_require_f(count, "No valid planes found.\n");
> +}
> +
> static void run_tests_for_plane(data_t *data, enum pipe pipe)
> {
> + int i;
> +
> igt_fixture {
> igt_require_pipe(&data->display, pipe);
> igt_require_pipe_crc(data->drm_fd);
> @@ -1186,6 +1399,18 @@ static void run_tests_for_plane(data_t *data, enum pipe pipe)
> igt_subtest_f("pipe-%s-plane-degamma",
> kmstest_pipe_name(pipe))
> run_plane_color_test(data, pipe, plane_degamma_test);
> +
> + for (i = 0; i < ARRAY_SIZE(ctm_tests); i++) {
> + igt_describe("Compare after applying ctm matrix & identity matrix");
> + igt_subtest_f("pipe-%s-%s",
> + kmstest_pipe_name(pipe),
> + ctm_tests[i].test_name) {
> + run_plane_ctm_test(data, pipe,
> + ctm_tests[i].expected_colors,
> + ctm_tests[i].ctm,
> + ctm_tests[i].iter);
> + }
> + }
> }
>
> igt_main
>
More information about the igt-dev
mailing list