[igt-dev] ✗ Fi.CI.BAT: failure for tests/amdgpu: Introduces DP DSC test

[Vudum, Lakshminarayana]

I have archived the filter as this bug/filter was created based on the results from this patch. 

Lakshmi.
-----Original Message-----
From: Latvala, Petri <petri.latvala at intel.com> 
Sent: Tuesday, November 30, 2021 7:42 AM
To: Rodrigo Siqueira Jordao <rjordrigo at amd.com>
Cc: Vudum, Lakshminarayana <lakshminarayana.vudum at intel.com>; Rodrigo Siqueira <rodrigo.siqueira at amd.com>; igt-dev at lists.freedesktop.org; Lipski, Mikita <mikita.lipski at amd.com>; Wentland, Harry <Harry.Wentland at amd.com>
Subject: Re: [igt-dev] ✗ Fi.CI.BAT: failure for tests/amdgpu: Introduces DP DSC test

On Tue, Nov 30, 2021 at 10:26:58AM -0500, Rodrigo Siqueira Jordao wrote:
> Hi Petri/Lakshmi,
> 
> Thanks a lot for your help with this issue.
> 
> Petri/Lakshmi, the only generic change that this patch made is in the 
> `enum igt_atomic_crtc_properties` as described in the below diff:
> 
> --- a/lib/igt_kms.h
> +++ b/lib/igt_kms.h
> @@ -125,6 +125,7 @@ enum igt_atomic_crtc_properties {
>         IGT_CRTC_ACTIVE,
>         IGT_CRTC_OUT_FENCE_PTR,
>         IGT_CRTC_VRR_ENABLED,
> +       IGT_CRTC_DSC_SLICE_HEIGHT,
>         IGT_NUM_CRTC_PROPS
>  };
> 
> Please, correct me if I'm wrong, but from the CI report this patch 
> might cause issues in the following subtests:
> 
> Possible regressions
> igt at kms_frontbuffer_tracking@fbc-tiling-y:
> 
> shard-iclb: PASS -> FAIL +803 similar issues
> igt at kms_plane@plane-panning-bottom-right:
> 
> shard-iclb: NOTRUN -> FAIL +159 similar issues
> igt at kms_prime@basic-crc at second-to-first:
> 
> shard-iclb: PASS -> CRASH +4 similar issues
> 
> (https://patchwork.freedesktop.org/series/97325/)
> 
> From the above list, the only test that I can try to reproduce on my 
> end is igt at kms_plane@plane-panning-bottom-right which works fine with 
> this patch or not. Additionally, it looks like that all failures in 
> this shard-iclb machine has:
> 
> 	
> Received signal SIGSEGV.
> Stack trace:
>  #0 [fatal_sig_handler+0xd6]
>  #1 [killpg+0x40]
>  #2 [__nss_database_lookup+0x20792]
>  #3 [igt_display_require+0x62a]
>  #4 [__igt_unique____real_main1225+0xc1]
>  #5 [main+0x3f]
>  #6 [__libc_start_main+0xf3]
>  #7 [_start+0x2a]
> (https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_6442/shard-iclb3/igt@k
> ms_plane at plane-panning-bottom-right.html)
> 
> From the above error, I expected that I could reproduce this type of 
> issue on my side. Additionally, when I looked at the shard-iclb 
> machine ((https://intel-gfx-ci.01.org/hardware.html)), I noticed it is 
> an Ice lake machine connected to a single eDP display (I suppose it is 
> a laptop). If this patch introduces such a regression, I guess we have 
> a bug in some of the igt_kms functions.
> 
> I don't have an Ice Lake machine for trying to reproduce this issue on 
> my side; in this sense, do you have any suggestions? Is this error 
> generic across Intel devices? Or only that specific machine? I think I 
> can try to remove that property from igt_kms and make it only 
> available inside the AMD test, but I'm not sure if this is the right approach.

The correct way is to add the property, and adjust all the other code that uses the properties. The key word to look for is IGT_NUM_CRTC_PROPS.

For example:

igt_kms.c:
const char * const igt_crtc_prop_names[IGT_NUM_CRTC_PROPS]

and inside igt_fill_pipe_props():

                        if (strcmp(prop->name, crtc_prop_names[j]) != 0)
			                                continue;


You add a prop enum, increasing IGT_NUM_CRTC_PROPS, but now there's an uninitialized index in igt_crtc_prop_names.

Etc.


--
Petri Latvala