[igt-dev] [PATCH i-g-t] tests/i915/i915_pm_dc.c: Remove PC8+ dependency from DC9.

Srivatsa, Anusha anusha.srivatsa at intel.com
Wed Apr 20 19:27:19 UTC 2022



> -----Original Message-----
> From: Vivi, Rodrigo <rodrigo.vivi at intel.com>
> Sent: Wednesday, April 20, 2022 12:09 PM
> To: igt-dev at lists.freedesktop.org; Srivatsa, Anusha
> <anusha.srivatsa at intel.com>
> Cc: Gupta, Anshuman <anshuman.gupta at intel.com>; Deak, Imre
> <imre.deak at intel.com>
> Subject: Re: [PATCH i-g-t] tests/i915/i915_pm_dc.c: Remove PC8+
> dependency from DC9.
> 
> On Wed, 2022-04-20 at 12:07 -0700, Srivatsa, Anusha wrote:
> >
> >
> > > -----Original Message-----
> > > From: Vivi, Rodrigo <rodrigo.vivi at intel.com>
> > > Sent: Wednesday, April 20, 2022 11:46 AM
> > > To: igt-dev at lists.freedesktop.org
> > > Cc: Vivi, Rodrigo <rodrigo.vivi at intel.com>; Deak, Imre
> > > <imre.deak at intel.com>; Gupta, Anshuman
> <anshuman.gupta at intel.com>;
> > > Srivatsa, Anusha <anusha.srivatsa at intel.com>
> > > Subject: [PATCH i-g-t] tests/i915/i915_pm_dc.c: Remove PC8+
> > > dependency from DC9.
> > >
> > > Different from DC6, DC9 does not depend on the BIOS/PCU to execute
> > > save and restore or any other sequence when going to PC9/PC10.
> > >
> > > DC9 actually depends on D3 and PCODE simply remove power if SW
> > > allowed.
> >
> > Is this the case for both igfx and dgfx?
> 
> yes
> 
When the check was introduced- for ICL, wasn’t this the requirement though? How come we have not had issues on ICL+ platforms till now if the check was wrong. 

Anusha
> >
> > Anusha
> >
> > > Cc: Imre Deak <imre.deak at intel.com>
> > > Cc: Anshuman Gupta <anshuman.gupta at intel.com>
> > > Cc: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > > Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > > ---
> > >  tests/i915/i915_pm_dc.c | 2 --
> > >  1 file changed, 2 deletions(-)
> > >
> > > diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c index
> > > 2c2c5086..9a22246c 100644
> > > --- a/tests/i915/i915_pm_dc.c
> > > +++ b/tests/i915/i915_pm_dc.c
> > > @@ -531,8 +531,6 @@ int main(int argc, char *argv[])
> > >
> > >         igt_describe("This test validates display engine entry to
> > > DC9 state");
> > >         igt_subtest("dc9-dpms") {
> > > -
> > >         igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_
> > > fd),
> > > -                               "PC8+ residencies not supported\n");
> > >                 test_dc9_dpms(&data);
> > >         }
> > >
> > > --
> > > 2.34.1
> >



More information about the igt-dev mailing list