[igt-dev] [PATCH i-g-t] tests/kms_big_joiner: Convert test to dynamic
Karthik B S
karthik.b.s at intel.com
Wed Apr 27 08:22:09 UTC 2022
Covert the tests to dynamic subtests at pipe level.
Signed-off-by: Karthik B S <karthik.b.s at intel.com>
---
tests/i915/kms_big_joiner.c | 218 +++++++++++++++++++-----------------
1 file changed, 118 insertions(+), 100 deletions(-)
diff --git a/tests/i915/kms_big_joiner.c b/tests/i915/kms_big_joiner.c
index d7fa2e53..9922e43c 100644
--- a/tests/i915/kms_big_joiner.c
+++ b/tests/i915/kms_big_joiner.c
@@ -35,6 +35,8 @@ typedef struct {
igt_display_t display;
struct igt_fb fb;
int n_pipes;
+ enum pipe pipe1;
+ enum pipe pipe2;
struct output_data {
uint32_t id;
int mode_number;
@@ -46,10 +48,12 @@ static void test_invalid_modeset(data_t *data)
drmModeModeInfo *mode;
igt_display_t *display = &data->display;
igt_output_t *output, *big_joiner_output = NULL, *second_output = NULL;
- int i, ret;
+ int ret;
igt_pipe_t *pipe;
igt_plane_t *plane;
+ igt_display_reset(display);
+
for_each_connected_output(display, output) {
mode = &output->config.connector->modes[0];
@@ -60,100 +64,92 @@ static void test_invalid_modeset(data_t *data)
}
}
- for_each_pipe(display, i) {
- if (i < (data->n_pipes - 1)) {
- igt_output_set_pipe(big_joiner_output, i);
+ igt_output_set_pipe(big_joiner_output, data->pipe1);
- mode = &big_joiner_output->config.connector->modes[data->big_joiner_output[0].mode_number];
- igt_output_override_mode(big_joiner_output, mode);
+ mode = &big_joiner_output->config.connector->modes[data->big_joiner_output[0].mode_number];
+ igt_output_override_mode(big_joiner_output, mode);
- pipe = &display->pipes[i];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+ pipe = &display->pipes[data->pipe1];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(plane, &data->fb);
- igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
- igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
- igt_display_commit2(display, COMMIT_ATOMIC);
+ igt_display_commit2(display, COMMIT_ATOMIC);
- igt_output_set_pipe(second_output, i + 1);
+ igt_output_set_pipe(second_output, data->pipe2);
- mode = igt_output_get_mode(second_output);
+ mode = igt_output_get_mode(second_output);
- pipe = &display->pipes[i + 1];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+ pipe = &display->pipes[data->pipe2];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(plane, &data->fb);
- igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
- igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
- /* This commit is expectd to fail as this pipe is being used for big joiner */
- ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
- DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- igt_assert_lt(ret, 0);
+ /* This commit is expectd to fail as this pipe is being used for big joiner */
+ ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
+ DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ igt_assert_lt(ret, 0);
- igt_output_set_pipe(big_joiner_output, PIPE_NONE);
- igt_output_set_pipe(second_output, PIPE_NONE);
+ igt_output_set_pipe(big_joiner_output, PIPE_NONE);
+ igt_output_set_pipe(second_output, PIPE_NONE);
- pipe = &display->pipes[i];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+ pipe = &display->pipes[data->pipe1];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- /*
- * Do not explicitly set the plane of the second output to NULL,
- * as it is the adjacent pipe to the big joiner output and
- * setting the big joiner plane to NULL will take care of this.
- */
- igt_plane_set_fb(plane, NULL);
- igt_display_commit2(display, COMMIT_ATOMIC);
- igt_output_override_mode(big_joiner_output, NULL);
- }
- }
+ /*
+ * Do not explicitly set the plane of the second output to NULL,
+ * as it is the adjacent pipe to the big joiner output and
+ * setting the big joiner plane to NULL will take care of this.
+ */
+ igt_plane_set_fb(plane, NULL);
+ igt_display_commit2(display, COMMIT_ATOMIC);
+ igt_output_override_mode(big_joiner_output, NULL);
- for_each_pipe(display, i) {
- if (i < (data->n_pipes - 1)) {
- igt_output_set_pipe(second_output, i + 1);
+ igt_output_set_pipe(second_output, data->pipe2);
- mode = igt_output_get_mode(second_output);
+ mode = igt_output_get_mode(second_output);
- pipe = &display->pipes[i + 1];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+ pipe = &display->pipes[data->pipe2];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(plane, &data->fb);
- igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
- igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
- igt_display_commit2(display, COMMIT_ATOMIC);
+ igt_display_commit2(display, COMMIT_ATOMIC);
- igt_output_set_pipe(big_joiner_output, i);
+ igt_output_set_pipe(big_joiner_output, data->pipe1);
- mode = &big_joiner_output->config.connector->modes[data->big_joiner_output[0].mode_number];
- igt_output_override_mode(big_joiner_output, mode);
+ mode = &big_joiner_output->config.connector->modes[data->big_joiner_output[0].mode_number];
+ igt_output_override_mode(big_joiner_output, mode);
- pipe = &display->pipes[i];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+ pipe = &display->pipes[data->pipe1];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(plane, &data->fb);
- igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
- igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
- /* This commit is expected to fail as the adjacent pipe is already in use*/
- ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
- DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- igt_assert_lt(ret, 0);
+ /* This commit is expected to fail as the adjacent pipe is already in use*/
+ ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
+ DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ igt_assert_lt(ret, 0);
- igt_output_set_pipe(big_joiner_output, PIPE_NONE);
- igt_output_set_pipe(second_output, PIPE_NONE);
- igt_plane_set_fb(plane, NULL);
+ igt_output_set_pipe(big_joiner_output, PIPE_NONE);
+ igt_output_set_pipe(second_output, PIPE_NONE);
+ igt_plane_set_fb(plane, NULL);
- pipe = &display->pipes[i + 1];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(plane, NULL);
+ pipe = &display->pipes[data->pipe2];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+ igt_plane_set_fb(plane, NULL);
- igt_display_commit2(display, COMMIT_ATOMIC);
+ igt_display_commit2(display, COMMIT_ATOMIC);
- igt_output_override_mode(big_joiner_output, NULL);
- }
- }
+ igt_output_override_mode(big_joiner_output, NULL);
}
static void test_basic_modeset(data_t *data)
@@ -161,10 +157,11 @@ static void test_basic_modeset(data_t *data)
drmModeModeInfo *mode;
igt_output_t *output, *big_joiner_output = NULL;
igt_display_t *display = &data->display;
- int i;
igt_pipe_t *pipe;
igt_plane_t *plane;
+ igt_display_reset(display);
+
for_each_connected_output(display, output) {
if (data->big_joiner_output[0].id == output->id) {
big_joiner_output = output;
@@ -172,27 +169,23 @@ static void test_basic_modeset(data_t *data)
}
}
- for_each_pipe(display, i) {
- if (i < (data->n_pipes - 1)) {
- igt_output_set_pipe(big_joiner_output, i);
+ igt_output_set_pipe(big_joiner_output, data->pipe1);
- mode = &big_joiner_output->config.connector->modes[data->big_joiner_output[0].mode_number];
- igt_output_override_mode(big_joiner_output, mode);
+ mode = &big_joiner_output->config.connector->modes[data->big_joiner_output[0].mode_number];
+ igt_output_override_mode(big_joiner_output, mode);
- pipe = &display->pipes[i];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+ pipe = &display->pipes[data->pipe1];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(plane, &data->fb);
- igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
- igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
- igt_display_commit2(display, COMMIT_ATOMIC);
+ igt_display_commit2(display, COMMIT_ATOMIC);
- igt_output_set_pipe(big_joiner_output, PIPE_NONE);
- igt_plane_set_fb(plane, NULL);
- igt_display_commit2(display, COMMIT_ATOMIC);
- }
- }
+ igt_output_set_pipe(big_joiner_output, PIPE_NONE);
+ igt_plane_set_fb(plane, NULL);
+ igt_display_commit2(display, COMMIT_ATOMIC);
}
static void test_dual_display(data_t *data)
@@ -204,6 +197,8 @@ static void test_dual_display(data_t *data)
igt_plane_t *plane;
int count = 0;
+ igt_display_reset(display);
+
for_each_connected_output(display, output) {
if (data->big_joiner_output[count].id == output->id) {
big_joiner_output[count] = output;
@@ -214,14 +209,14 @@ static void test_dual_display(data_t *data)
break;
}
- igt_output_set_pipe(big_joiner_output[0], PIPE_A);
- igt_output_set_pipe(big_joiner_output[1], PIPE_C);
+ igt_output_set_pipe(big_joiner_output[0], data->pipe1);
+ igt_output_set_pipe(big_joiner_output[1], data->pipe2);
/* Set up first big joiner output on Pipe A*/
mode = &big_joiner_output[0]->config.connector->modes[data->big_joiner_output[0].mode_number];
igt_output_override_mode(big_joiner_output[0], mode);
- pipe = &display->pipes[PIPE_A];
+ pipe = &display->pipes[data->pipe1];
plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
igt_plane_set_fb(plane, &data->fb);
@@ -232,7 +227,7 @@ static void test_dual_display(data_t *data)
mode = &big_joiner_output[1]->config.connector->modes[data->big_joiner_output[1].mode_number];
igt_output_override_mode(big_joiner_output[1], mode);
- pipe = &display->pipes[PIPE_C];
+ pipe = &display->pipes[data->pipe2];
plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
igt_plane_set_fb(plane, &data->fb);
@@ -244,8 +239,8 @@ static void test_dual_display(data_t *data)
/* Clean up */
igt_output_set_pipe(big_joiner_output[0], PIPE_NONE);
igt_output_set_pipe(big_joiner_output[1], PIPE_NONE);
- igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[PIPE_A], DRM_PLANE_TYPE_PRIMARY), NULL);
- igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[PIPE_C], DRM_PLANE_TYPE_PRIMARY), NULL);
+ igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[data->pipe1], DRM_PLANE_TYPE_PRIMARY), NULL);
+ igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[data->pipe2], DRM_PLANE_TYPE_PRIMARY), NULL);
igt_display_commit2(display, COMMIT_ATOMIC);
}
@@ -254,8 +249,9 @@ igt_main
data_t data;
igt_output_t *output;
drmModeModeInfo *mode;
- int valid_output = 0, i, count = 0;
+ int valid_output = 0, i, count = 0, j = 0;
uint16_t width = 0, height = 0;
+ enum pipe pipe_seq[IGT_MAX_PIPES];
igt_fixture {
data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
@@ -282,8 +278,11 @@ igt_main
}
data.n_pipes = 0;
- for_each_pipe(&data.display, i)
+ for_each_pipe(&data.display, i) {
data.n_pipes++;
+ pipe_seq[j] = i;
+ j++;
+ }
igt_require_f(count > 0, "No output with 5k+ mode found\n");
@@ -292,21 +291,40 @@ igt_main
}
igt_describe("Verify the basic modeset on big joiner mode on all pipes");
- igt_subtest("basic")
- test_basic_modeset(&data);
+ igt_subtest_with_dynamic("basic") {
+ for (i = 0; i < data.n_pipes - 1; i++) {
+ if (i < (data.n_pipes - 1)) {
+ data.pipe1 = pipe_seq[i];
+ igt_dynamic_f("pipe-%s", kmstest_pipe_name(pipe_seq[i]))
+ test_basic_modeset(&data);
+ }
+ }
+ }
igt_describe("Verify if the modeset on the adjoining pipe is rejected "
"when the pipe is active with a big joiner modeset");
- igt_subtest("invalid-modeset") {
+ igt_subtest_with_dynamic("invalid-modeset") {
igt_require_f(valid_output > 1, "No valid Second output found\n");
- test_invalid_modeset(&data);
+ for (i = 0; i < data.n_pipes - 1; i++) {
+ if (i < (data.n_pipes - 1)) {
+ data.pipe1 = pipe_seq[i];
+ data.pipe2 = pipe_seq[i + 1];
+ igt_dynamic_f("pipe-%s", kmstest_pipe_name(pipe_seq[i]))
+ test_invalid_modeset(&data);
+ }
+ }
}
igt_describe("Verify simultaneous modeset on 2 big joiner outputs");
- igt_subtest("2x-modeset") {
+ igt_subtest_with_dynamic("2x-modeset") {
igt_require_f(count > 1, "2 outputs with big joiner modes are required\n");
igt_require_f(data.n_pipes > 3, "Minumum of 4 pipes are required\n");
- test_dual_display(&data);
+ for (i = 0; (i + 2) < data.n_pipes - 1; i++) {
+ data.pipe1 = pipe_seq[i];
+ data.pipe2 = pipe_seq[i + 2];
+ igt_dynamic_f("pipe-%s%s", kmstest_pipe_name(pipe_seq[i]), kmstest_pipe_name(pipe_seq[i + 2]))
+ test_dual_display(&data);
+ }
}
igt_fixture {
--
2.22.0
More information about the igt-dev
mailing list