[igt-dev] [PATCH 2/2] tests/i915/kms_draw_crc: Test Cleanup
Modem, Bhanuprakash
bhanuprakash.modem at intel.com
Tue Aug 2 09:56:52 UTC 2022
Hi Nidhi,
Overall, this change looks good to me. Please address some minor
comments inline.
On Tue-02-08-2022 12:23 pm, Nidhi Gupta wrote:
> v2: -Replace drm function call with existing library functions
> (Bhanu)
>
> Signed-off-by: Nidhi Gupta <nidhi1.gupta at intel.com>
> ---
> tests/i915/kms_draw_crc.c | 60 ++++++++++++---------------------------
> 1 file changed, 18 insertions(+), 42 deletions(-)
>
> diff --git a/tests/i915/kms_draw_crc.c b/tests/i915/kms_draw_crc.c
> index 5c9feac9..eaa200b9 100644
> --- a/tests/i915/kms_draw_crc.c
> +++ b/tests/i915/kms_draw_crc.c
> @@ -31,12 +31,12 @@
>
> struct modeset_params {
> uint32_t crtc_id;
> - uint32_t connector_id;
> drmModeModeInfoPtr mode;
> };
>
> int drm_fd;
> -drmModeResPtr drm_res;
> +igt_display_t display;
> +igt_output_t *output;
> drmModeConnectorPtr drm_connectors[MAX_CONNECTORS];
> struct buf_ops *bops;
> igt_pipe_crc_t *pipe_crc;
> @@ -64,27 +64,21 @@ struct modeset_params ms;
>
> static void find_modeset_params(void)
> {
> - int i;
> uint32_t crtc_id;
> - drmModeConnectorPtr connector = NULL;
> - drmModeModeInfoPtr mode = NULL;
> + drmModeModeInfo *mode;
>
> - for (i = 0; i < drm_res->count_connectors; i++) {
> - drmModeConnectorPtr c = drm_connectors[i];
> + igt_display_reset(&display);
> + igt_display_commit(&display);
>
> - if (c->count_modes) {
> - connector = c;
> - mode = &c->modes[0];
> - break;
> - }
> - }
> - igt_require(connector);
> -
> - crtc_id = kmstest_find_crtc_for_connector(drm_fd, drm_res, connector,
> - 0);
> + output = igt_get_single_output_for_pipe(&display, PIPE_A);
If PIPE_A is not available or fused, then?
Please find a compatible pipe/output combo to proceed.
- Bhanu
> + igt_require(output);
> + igt_output_set_pipe(output, PIPE_A);
> +
> + mode = igt_output_get_mode(output);
> igt_assert(mode);
>
> - ms.connector_id = connector->connector_id;
> + crtc_id = display.pipes[PIPE_A].crtc_id;
> +
> ms.crtc_id = crtc_id;
> ms.mode = mode;
>
> @@ -144,8 +138,7 @@ static void get_method_crc(enum igt_draw_method method, uint32_t drm_format,
> igt_draw_rect_fb(drm_fd, bops, 0, &fb, method, 1, 1, 15, 15,
> get_color(drm_format, 0, 1, 1));
>
> - rc = drmModeSetCrtc(drm_fd, ms.crtc_id, fb.fb_id, 0, 0,
> - &ms.connector_id, 1, ms.mode);
> + rc = igt_display_commit2(&display, display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> igt_assert_eq(rc, 0);
>
> igt_pipe_crc_collect_crc(pipe_crc, crc);
> @@ -212,8 +205,7 @@ static void get_fill_crc(uint64_t modifier, igt_crc_t *crc)
>
> igt_draw_fill_fb(drm_fd, &fb, 0xFF);
>
> - rc = drmModeSetCrtc(drm_fd, ms.crtc_id, fb.fb_id, 0, 0,
> - &ms.connector_id, 1, ms.mode);
> + rc = igt_display_commit2(&display, display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> igt_assert_eq(rc, 0);
>
> igt_pipe_crc_collect_crc(pipe_crc, crc);
> @@ -236,8 +228,7 @@ static void fill_fb_subtest(void)
> IGT_DRAW_MMAP_WC,
> 0, 0, fb.width, fb.height, 0xFF);
>
> - rc = drmModeSetCrtc(drm_fd, ms.crtc_id, fb.fb_id, 0, 0,
> - &ms.connector_id, 1, ms.mode);
> + rc = igt_display_commit2(&display, display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> igt_assert_eq(rc, 0);
>
> igt_pipe_crc_collect_crc(pipe_crc, &base_crc);
> @@ -260,40 +251,25 @@ static void fill_fb_subtest(void)
>
> static void setup_environment(void)
> {
> - int i;
> -
> drm_fd = drm_open_driver_master(DRIVER_INTEL);
> igt_require(drm_fd >= 0);
> -
> - drm_res = drmModeGetResources(drm_fd);
> - igt_require(drm_res);
> - igt_assert(drm_res->count_connectors <= MAX_CONNECTORS);
> -
> - for (i = 0; i < drm_res->count_connectors; i++)
> - drm_connectors[i] = drmModeGetConnectorCurrent(drm_fd,
> - drm_res->connectors[i]);
> + igt_display_require(&display, drm_fd);
> + igt_display_require_output(&display);
>
> kmstest_set_vt_graphics_mode();
>
> bops = buf_ops_create(drm_fd);
>
> find_modeset_params();
> - pipe_crc = igt_pipe_crc_new(drm_fd, kmstest_get_crtc_idx(drm_res, ms.crtc_id),
> - INTEL_PIPE_CRC_SOURCE_AUTO);
> + pipe_crc = igt_pipe_crc_new(drm_fd, PIPE_A, INTEL_PIPE_CRC_SOURCE_AUTO);
> }
>
> static void teardown_environment(void)
> {
> - int i;
> -
> igt_pipe_crc_free(pipe_crc);
>
> buf_ops_destroy(bops);
>
> - for (i = 0; i < drm_res->count_connectors; i++)
> - drmModeFreeConnector(drm_connectors[i]);
> -
> - drmModeFreeResources(drm_res);
> close(drm_fd);
> }
>
More information about the igt-dev
mailing list