[igt-dev] [PATCH i-g-t] tests/i915/i915_pipe_stress: Add plane pipes stress test
Stanislav Lisovskiy
stanislav.lisovskiy at intel.com
Mon Aug 22 06:35:02 UTC 2022
This test attempts to utilize all connected
outputs at the same time, using maximum possible
resolution and amount of planes, to check whether
we are hiting any kind of bandwidth, watermark or
other limitations.
v2: Use igt_skip_on to skip unsupported formats in
fixture properly.
v3: - Changed to SPDX license
- Removed execution engine usage, which seems to
be not needed yet here
- Fixed some obvious things found, like missing
dot and new line after declarations
- Added igt_skip_on to igt_fixture to properly
skip formats/modifiers, not supported on
current platform.
v4: - Added mutex, as gpu_fill seems to cause some
crashes if run from multiple threads.
- Some additional info addedy
v5: - Removed igt_require_f as it is being called from
non-main thread(Petri Latvala)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
---
tests/i915/i915_pipe_stress.c | 865 ++++++++++++++++++++++++++++++++++
tests/meson.build | 1 +
2 files changed, 866 insertions(+)
create mode 100644 tests/i915/i915_pipe_stress.c
diff --git a/tests/i915/i915_pipe_stress.c b/tests/i915/i915_pipe_stress.c
new file mode 100644
index 0000000000..d410471307
--- /dev/null
+++ b/tests/i915/i915_pipe_stress.c
@@ -0,0 +1,865 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2021 Intel Corporation
+ */
+
+#include "igt.h"
+#include "igt_rand.h"
+#include "gpgpu_fill.h"
+#include "drmtest.h"
+#include "sw_sync.h"
+#include <errno.h>
+#include <pthread.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <time.h>
+#include <poll.h>
+#include <pthread.h>
+#include <semaphore.h>
+#include "i915/gem.h"
+
+IGT_TEST_DESCRIPTION("Stress test how gpu and cpu behaves if maximum amount of planes, "
+ "cpu and gpu utilization is achieved in order to reveal possible "
+ "bandwidth/watermark and similar problems.");
+
+#ifndef DRM_CAP_CURSOR_WIDTH
+#define DRM_CAP_CURSOR_WIDTH 0x8
+#endif
+#ifndef DRM_CAP_CURSOR_HEIGHT
+#define DRM_CAP_CURSOR_HEIGHT 0x9
+#endif
+
+#define HAS_XELPD(drm_fd) (intel_display_ver(intel_get_drm_devid(drm_fd)) >= 13)
+
+#define N_BLITS_PER_FRAME 10
+
+#define N_FORMATS 1
+static const uint32_t formats[N_FORMATS] = {
+ DRM_FORMAT_XRGB8888,
+};
+
+#define N_TILING_METHODS 2
+static const uint64_t tilings[N_TILING_METHODS] = {
+ DRM_FORMAT_MOD_LINEAR,
+ I915_FORMAT_MOD_Y_TILED,
+};
+
+static const char *format_str(int format_index)
+{
+ switch (formats[format_index]) {
+ case DRM_FORMAT_RGB565:
+ return "rgb565";
+ case DRM_FORMAT_XRGB8888:
+ return "xrgb8888";
+ case DRM_FORMAT_XRGB2101010:
+ return "xrgb2101010";
+ default:
+ igt_assert(false);
+ }
+}
+
+static const char *tiling_str(int tiling_index)
+{
+ switch (tilings[tiling_index]) {
+ case DRM_FORMAT_MOD_LINEAR:
+ return "untiled";
+ case I915_FORMAT_MOD_X_TILED:
+ return "xtiled";
+ case I915_FORMAT_MOD_Y_TILED:
+ return "ytiled";
+ default:
+ igt_assert(false);
+ }
+}
+
+
+#define MAX_CORES 8
+#define MAX_PLANES 16
+
+struct data;
+
+struct thread_context {
+ struct data *data;
+ int id;
+ void *buf1;
+ void *buf2;
+};
+
+struct rect {
+ int x;
+ int y;
+ int w;
+ int h;
+};
+
+struct gpu_context {
+ struct data *data;
+ int pipe;
+ int color;
+ int num_rectangles;
+ struct intel_buf *buf;
+ struct igt_fb *fb_ptr;
+ struct rect blt_rect;
+ struct intel_batchbuffer *batch;
+};
+
+enum {
+ RUNNING,
+ STOPPED,
+ PAUSED,
+ LAST_STATE = PAUSED
+} thread_state;
+
+struct data {
+ int drm_fd;
+ igt_display_t display;
+ int num_planes[IGT_MAX_PIPES];
+ uint32_t format;
+ uint64_t modifier;
+ uint32_t devid;
+ struct buf_ops *bops;
+ drm_intel_bufmgr *bufmgr;
+ drmModeModeInfo *last_mode[IGT_MAX_PIPES];
+ struct igt_fb fb[IGT_MAX_PIPES * MAX_PLANES];
+ struct igt_fb cursor_fb[IGT_MAX_PIPES];
+ pthread_t cpu_thread[MAX_CORES];
+ pthread_t gpu_thread[IGT_MAX_PIPES];
+ bool cpu_thread_stop[MAX_CORES];
+ int gpu_thread_state[IGT_MAX_PIPES];
+ sem_t gpu_thread_pause_ack[IGT_MAX_PIPES];
+ struct thread_context cpu_context[MAX_CORES];
+ struct gpu_context gpu_context[IGT_MAX_PIPES];
+ pthread_mutex_t gpu_fill_lock;
+ drmModeModeInfo *highest_mode[IGT_MAX_PIPES];
+ drmModeConnectorPtr *connectors;
+ drmModeRes *mode_resources;
+ int number_of_cores;
+ igt_pipe_crc_t *pipe_crc[IGT_MAX_PIPES];
+};
+
+static void stop_gpu_threads(struct data *data);
+static void start_gpu_threads(struct data *data);
+
+struct base_crc {
+ bool set;
+ igt_crc_t crc;
+};
+
+#define BUF_SIZE (128 * 1024 * 1024)
+
+static void *cpu_load(void *d)
+{
+ char *buf1, *buf2;
+ struct thread_context *context = (struct thread_context *)d;
+ struct data *data = context->data;
+
+ buf1 = context->buf1;
+ buf2 = context->buf2;
+
+ data->cpu_thread_stop[context->id] = false;
+
+ igt_info("CPU thread cpu id %d start\n", context->id);
+
+ /* Just to make CPU busy... */
+ while (!data->cpu_thread_stop[context->id]) {
+ memcpy(buf1, buf2, BUF_SIZE);
+ memcpy(buf2, buf1, BUF_SIZE);
+ }
+
+ igt_info("CPU thread cpu id %d stop\n", context->id);
+
+ return NULL;
+}
+
+static struct intel_buf *
+create_buf(struct data *data, int width, int height, uint32_t region)
+{
+ struct intel_buf *buf;
+ uint32_t handle;
+
+ buf = calloc(1, sizeof(*buf));
+ igt_assert(buf);
+
+ /*
+ * Legacy code uses 32 bpp after buffer creation.
+ * Let's do the same due to keep shader intact.
+ */
+ handle = gem_create_in_memory_regions(data->drm_fd, width * height, region);
+ intel_buf_init_using_handle(data->bops, handle, buf,
+ width/4, height, 32, 0,
+ I915_TILING_NONE, 0);
+
+ return buf;
+}
+
+static void fill_gpu(struct gpu_context *context,
+ unsigned int x, unsigned int y,
+ unsigned int width, unsigned int height,
+ uint8_t color)
+{
+ struct data *data = context->data;
+ igt_fillfunc_t fill_fn = NULL;
+
+ pthread_mutex_lock(&data->gpu_fill_lock);
+
+ fill_fn = igt_get_gpgpu_fillfunc(data->devid);
+
+ igt_assert(context->buf);
+
+ fill_fn(data->drm_fd, context->buf, x, y, width, height, color);
+
+ pthread_mutex_unlock(&data->gpu_fill_lock);
+}
+
+static void *gpu_load(void *ptr)
+{
+ struct gpu_context *context = (struct gpu_context *)ptr;
+ struct data *data = context->data;
+ int pipe = context->pipe;
+ int rect_divisor;
+ int rect_width;
+ int rect_height;
+ int frame_width;
+ int frame_height;
+ drmModeModeInfo *mode;
+ int frame = 0;
+ int x, y;
+ int rect = 0, total_rects = 0;
+ int pixels = 0;
+
+ mode = data->highest_mode[pipe];
+ if (!mode)
+ return NULL;
+
+ frame_width = mode->hdisplay;
+ frame_height = mode->vdisplay;
+
+ igt_info("GPU thread pipe %d start\n", pipe);
+
+ context->buf = create_buf(data, data->highest_mode[pipe]->hdisplay,
+ data->highest_mode[pipe]->vdisplay,
+ INTEL_MEMORY_REGION_ID(I915_SYSTEM_MEMORY, 0));
+
+ while (data->gpu_thread_state[pipe] != STOPPED) {
+
+ rect = 0;
+ while (rect < context->num_rectangles) {
+ /* divide at least by 2 and up to 8 */
+ int x_rand, y_rand;
+
+ rect_divisor = 1 << (hars_petruska_f54_1_random_unsafe_max(3) + 1);
+
+ rect_width = frame_width / rect_divisor;
+ rect_height = frame_height / rect_divisor;
+
+ x_rand = hars_petruska_f54_1_random_unsafe_max(frame_width - rect_width);
+ y_rand = hars_petruska_f54_1_random_unsafe_max(frame_height/2 - rect_height);
+
+ context->blt_rect.x = x + x_rand;
+ context->blt_rect.y = y + y_rand;
+
+ /* Fill randomly sized and positioned rectangles */
+ fill_gpu(context, context->blt_rect.x, context->blt_rect.y,
+ context->blt_rect.x + rect_width,
+ context->blt_rect.y + rect_height,
+ context->color);
+
+ context->color += 4;
+
+ ++rect;
+
+ pixels += rect_width * rect_height;
+ }
+ ++frame;
+ total_rects += rect;
+ }
+
+ intel_buf_close(data->bops, context->buf);
+
+ igt_info("GPU thread pipe %d stop. Frames rendered: %d Rectangles: %d Pixels filled: %d\n",
+ pipe, frame, total_rects, pixels);
+
+ return NULL;
+}
+
+static inline uint32_t pipe_select(enum pipe pipe)
+{
+ if (pipe > 1)
+ return pipe << DRM_VBLANK_HIGH_CRTC_SHIFT;
+ else if (pipe > 0)
+ return DRM_VBLANK_SECONDARY;
+ else
+ return 0;
+}
+
+static unsigned get_vblank(int fd, enum pipe pipe, unsigned flags)
+{
+ union drm_wait_vblank vbl;
+
+ memset(&vbl, 0, sizeof(vbl));
+ vbl.request.type = DRM_VBLANK_RELATIVE | pipe_select(pipe) | flags;
+ if (drmIoctl(fd, DRM_IOCTL_WAIT_VBLANK, &vbl))
+ return 0;
+
+ return vbl.reply.sequence;
+}
+
+static int commit_mode(struct data *data, igt_output_t *output,
+ enum pipe pipe, drmModeModeInfo *mode)
+{
+ int ret;
+
+ igt_output_override_mode(output, mode);
+ igt_output_set_pipe(output, pipe);
+
+ ret = igt_display_try_commit_atomic(&data->display,
+ DRM_MODE_ATOMIC_TEST_ONLY |
+ DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (ret) {
+ igt_warn("Could not commit mode: \n");
+ kmstest_dump_mode(mode);
+ return ret;
+ }
+
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
+
+ return 0;
+}
+
+static void cursor_plane_set_fb(igt_plane_t *plane, struct igt_fb *fb,
+ int width, int height)
+{
+ igt_plane_set_fb(plane, fb);
+ igt_fb_set_size(fb, plane, width, height);
+}
+
+static void universal_plane_set_fb(igt_plane_t *plane, struct igt_fb *fb,
+ int width, int height)
+{
+ igt_plane_set_fb(plane, fb);
+ igt_plane_set_position(plane, 0, 0);
+ igt_fb_set_size(fb, plane, width, height);
+}
+
+static bool plane_needs_rotation(int drm_fd, uint64_t modifier, igt_plane_t *plane)
+{
+ return !HAS_XELPD(drm_fd) && !IS_DG2(intel_get_drm_devid(drm_fd)) &&
+ modifier == I915_FORMAT_MOD_Y_TILED &&
+ plane->type != DRM_PLANE_TYPE_CURSOR;
+}
+
+static int try_plane_scaling(struct data *data, igt_plane_t *plane,
+ int width, int height)
+{
+ int ret;
+
+ if (plane_needs_rotation(data->drm_fd, data->modifier, plane)) {
+ igt_plane_set_rotation(plane, IGT_ROTATION_90);
+ igt_plane_set_size(plane, height, width);
+ } else {
+ igt_plane_set_size(plane, width, height);
+ }
+
+ ret = igt_display_try_commit_atomic(&data->display,
+ DRM_MODE_ATOMIC_TEST_ONLY |
+ DRM_MODE_ATOMIC_ALLOW_MODESET,
+ NULL);
+
+ return ret;
+}
+
+static void cleanup_plane_fbs(struct data *data, enum pipe pipe, int start, int end)
+{
+ int i = start;
+
+ while (i < end) {
+ igt_remove_fb(data->display.drm_fd,
+ &data->fb[pipe * MAX_PLANES + i]);
+ data->fb[pipe * MAX_PLANES + i].fb_id = 0;
+ i++;
+ }
+}
+
+static int pipe_stress(struct data *data, igt_output_t *output,
+ enum pipe pipe, drmModeModeInfo *mode)
+{
+ igt_plane_t *plane;
+ int i = 0;
+ int ret;
+ bool new_mode = false;
+ uint64_t cursor_width, cursor_height;
+
+ do_or_die(drmGetCap(data->drm_fd, DRM_CAP_CURSOR_WIDTH, &cursor_width));
+ do_or_die(drmGetCap(data->drm_fd, DRM_CAP_CURSOR_HEIGHT, &cursor_height));
+
+ if (!mode)
+ mode = igt_output_get_mode(output);
+
+ if (data->last_mode[pipe] != mode) {
+ ret = commit_mode(data, output, pipe, mode);
+
+ if (!ret)
+ return ret;
+
+ data->last_mode[pipe] = mode;
+ new_mode = true;
+ }
+
+ /*
+ * Looks like we can't have planes on that pipe at all
+ * or mode hasn't changed
+ */
+ if (!data->num_planes[pipe] || !new_mode)
+ return 0;
+
+ for_each_plane_on_pipe(&data->display, pipe, plane) {
+ int plane_width, plane_height;
+ if (plane->type == DRM_PLANE_TYPE_CURSOR) {
+ cursor_plane_set_fb(plane, &data->cursor_fb[pipe],
+ cursor_width, cursor_height);
+ plane_width = cursor_width;
+ plane_height = cursor_height;
+ } else {
+ universal_plane_set_fb(plane, &data->fb[pipe * MAX_PLANES + i],
+ mode->hdisplay, mode->vdisplay);
+
+ plane_width = (mode->hdisplay * 3) / 4;
+ plane_height = (mode->vdisplay * 3) / 4;
+
+ ret = try_plane_scaling(data, plane, plane_width, plane_height);
+
+ while (ret) {
+ if (plane_width <= cursor_width || plane_height <= cursor_height)
+ break;
+
+ plane_width /= 2;
+ plane_height /= 2;
+
+ ret = try_plane_scaling(data, plane, plane_width, plane_height);
+
+ igt_info("Reduced plane %d size to %dx%d\n",
+ plane->index, plane_width, plane_height);
+ }
+ if (ret) {
+ igt_info("Plane %d pipe %d try commit failed, exiting\n", i, pipe);
+ data->num_planes[pipe] = i;
+ igt_info("Max num planes for pipe %d set to %d\n", pipe, i);
+ /*
+ * We have now determined max amount of full sized planes, we will just
+ * keep it in mind and be smarter next time. Also lets remove unneeded fbs.
+ * Don't destroy cursor_fb as will take care about it at the end.
+ */
+ igt_plane_set_fb(plane, NULL);
+ cleanup_plane_fbs(data, pipe, i, MAX_PLANES);
+ }
+
+ if (++i >= data->num_planes[pipe])
+ break;
+ }
+ }
+
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
+
+ return 0;
+}
+
+static __u64 get_mode_data_rate(drmModeModeInfo *mode)
+{
+ __u64 data_rate = (__u64)mode->hdisplay * (__u64)mode->vdisplay * (__u64)mode->vrefresh;
+
+ return data_rate;
+}
+
+
+static drmModeModeInfo *find_highest_mode(drmModeConnector *connector)
+{
+ drmModeModeInfo *highest_mode = NULL;
+ int j;
+
+ for (j = 0; j < connector->count_modes; j++) {
+ if (!highest_mode) {
+ highest_mode = &connector->modes[j];
+ } else if (connector->modes[j].vdisplay && connector->modes[j].hdisplay) {
+ __u64 highest_data_rate = get_mode_data_rate(highest_mode);
+ __u64 data_rate = get_mode_data_rate(&connector->modes[j]);
+
+ if (highest_data_rate < data_rate)
+ highest_mode = &connector->modes[j];
+ }
+ }
+
+ return highest_mode;
+}
+
+typedef drmModeConnector *drmModeConnectorPtr;
+
+static void fill_connector_to_pipe_array(struct data *data,
+ drmModeRes *mode_resources,
+ drmModeConnectorPtr *connectors)
+{
+ int pipe = 0;
+ int i;
+
+ memset(connectors, 0, sizeof(drmModeConnectorPtr) *
+ mode_resources->count_connectors);
+
+ igt_info("Got %d connectors\n", mode_resources->count_connectors);
+
+ for (i = 0; i < mode_resources->count_connectors; i++) {
+ drmModeConnector *connector;
+
+ connector = drmModeGetConnector(data->drm_fd,
+ mode_resources->connectors[i]);
+
+ if (!connector) {
+ igt_warn("could not get connector %i: %s\n",
+ mode_resources->connectors[i], strerror(errno));
+ continue;
+ }
+
+ if (connector->connection == DRM_MODE_CONNECTED) {
+ igt_info("Connector %d connected to pipe %d\n", i, pipe);
+ connectors[pipe] = (drmModeConnectorPtr)connector;
+ ++pipe;
+ if (pipe == IGT_MAX_PIPES)
+ break;
+ } else {
+ igt_info("Connector %d connection status %d\n",
+ i, connector->connection);
+ drmModeFreeConnector(connector);
+ }
+ }
+}
+
+static void release_connectors(drmModeConnectorPtr *connectors)
+{
+ int i;
+
+ for (i = 0; i < IGT_MAX_PIPES; i++) {
+ if (connectors[i])
+ drmModeFreeConnector(connectors[i]);
+ }
+ free(connectors);
+}
+
+static void stress_pipes(struct data *data, struct timespec *start,
+ struct timespec *end)
+{
+ int pipe = 0;
+ int ret = 0;
+ igt_output_t *output;
+ igt_crc_t crc, crc2;
+
+ for_each_connected_output(&data->display, output) {
+
+ if (!data->highest_mode[pipe])
+ continue;
+
+ igt_assert_f(data->display.pipes[pipe].n_planes < MAX_PLANES,
+ "Currently we don't support more than %d planes!",
+ MAX_PLANES);
+
+ ret = pipe_stress(data, output, pipe,
+ data->highest_mode[pipe]);
+ if (ret)
+ break;
+
+ igt_pipe_crc_start(data->pipe_crc[pipe]);
+ igt_pipe_crc_get_current(data->display.drm_fd, data->pipe_crc[pipe], &crc);
+ get_vblank(data->display.drm_fd, pipe,
+ DRM_VBLANK_NEXTONMISS);
+ igt_pipe_crc_get_current(data->display.drm_fd, data->pipe_crc[pipe], &crc2);
+ igt_pipe_crc_stop(data->pipe_crc[pipe]);
+ igt_assert_crc_equal(&crc, &crc2);
+
+ ++pipe;
+ }
+}
+
+#define MIN_DURATION_SEC 5.0
+#define MIN_ITERATIONS 20
+
+static void stress(struct data *data)
+{
+ struct timespec start, end;
+ int iterations = 0;
+ bool need_continue;
+
+ igt_gettime(&start);
+
+ do {
+ igt_gettime(&end);
+ stress_pipes(data, &start, &end);
+ iterations++;
+ need_continue =
+ igt_time_elapsed(&start, &end) < MIN_DURATION_SEC;
+ } while ((need_continue || iterations < MIN_ITERATIONS));
+}
+
+static void start_gpu_threads(struct data *data)
+{
+ int i;
+
+ data->bops = buf_ops_create(data->drm_fd);
+
+ pthread_mutex_init(&data->gpu_fill_lock, NULL);
+
+ for (i = 0; i < IGT_MAX_PIPES; i++) {
+ if (!data->highest_mode[i])
+ continue;
+ data->gpu_context[i].data = data;
+ data->gpu_context[i].pipe = i;
+ data->gpu_context[i].fb_ptr = NULL;
+ data->gpu_context[i].blt_rect.x = 0;
+ data->gpu_context[i].blt_rect.y = 0;
+ data->gpu_context[i].blt_rect.w = 0;
+ data->gpu_context[i].blt_rect.h = 0;
+ data->gpu_context[i].num_rectangles = N_BLITS_PER_FRAME;
+ data->gpu_thread_state[i] = RUNNING;
+ data->gpu_context[i].buf = NULL;
+ igt_info("Starting GPU thread %d\n", i);
+
+ pthread_create(&data->gpu_thread[i], NULL, gpu_load,
+ (void *)&data->gpu_context[i]);
+
+ igt_info("GPU thread %d started\n", i);
+ }
+}
+
+static void stop_gpu_threads(struct data *data)
+{
+ int i;
+
+ for (i = 0; i < IGT_MAX_PIPES; i++) {
+ if (!data->highest_mode[i])
+ continue;
+ igt_info("Stopping GPU thread %d\n", i);
+ data->gpu_thread_state[i] = STOPPED;
+ pthread_join(data->gpu_thread[i], NULL);
+ igt_info("Stopped GPU thread %d\n", i);
+ data->gpu_context[i].fb_ptr = NULL;\
+ data->gpu_context[i].buf = NULL;
+ }
+
+ buf_ops_destroy(data->bops);
+}
+
+static void start_cpu_threads(struct data *data)
+{
+ int i;
+
+ for (i = 0; i < data->number_of_cores; i++) {
+ data->cpu_context[i].buf1 = malloc(BUF_SIZE);
+ data->cpu_context[i].buf2 = malloc(BUF_SIZE);
+ data->cpu_context[i].id = i;
+ data->cpu_context[i].data = data;
+ pthread_create(&data->cpu_thread[i], NULL, cpu_load,
+ (void *)&data->cpu_context[i]);
+ }
+}
+
+static void stop_cpu_threads(struct data *data)
+{
+ int i;
+
+ for (i = 0; i < data->number_of_cores; i++) {
+ data->cpu_thread_stop[i] = true;
+ pthread_join(data->cpu_thread[i], NULL);
+ free(data->cpu_context[i].buf1);
+ free(data->cpu_context[i].buf2);
+ }
+}
+
+static void create_framebuffers(struct data *data)
+{
+ int i, j;
+ uint64_t cursor_width, cursor_height;
+
+ do_or_die(drmGetCap(data->drm_fd, DRM_CAP_CURSOR_WIDTH, &cursor_width));
+ do_or_die(drmGetCap(data->drm_fd, DRM_CAP_CURSOR_HEIGHT, &cursor_height));
+
+ for (i = 0; i < IGT_MAX_PIPES; i++) {
+ if (!data->highest_mode[i])
+ continue;
+
+ if (!data->cursor_fb[i].fb_id) {
+ igt_create_color_fb(data->drm_fd,
+ cursor_width, cursor_height,
+ data->format,
+ data->modifier,
+ 1.0, 0.0, 0.0,
+ &data->cursor_fb[i]);
+ }
+
+ for (j = 0; j < data->num_planes[i]; j++) {
+ if (!data->fb[i * MAX_PLANES + j].fb_id) {
+ igt_create_color_pattern_fb(data->drm_fd,
+ data->highest_mode[i]->hdisplay,
+ data->highest_mode[i]->vdisplay,
+ data->format,
+ data->modifier,
+ 0.0, 1.0, 0.0, &data->fb[i * MAX_PLANES + j]);
+ }
+ }
+ }
+}
+
+static void destroy_framebuffers(struct data *data)
+{
+ int i, j;
+
+ for (i = 0; i < IGT_MAX_PIPES; i++) {
+
+ if (!data->highest_mode[i])
+ continue;
+
+ for (j = 0; j < MAX_PLANES; j++) {
+ if (data->fb[i * MAX_PLANES + j].fb_id) {
+ igt_plane_set_fb(&data->display.pipes[i].planes[j], NULL);
+ igt_remove_fb(data->display.drm_fd, &data->fb[i * MAX_PLANES + j]);
+ data->fb[i * MAX_PLANES + j].fb_id = 0;
+ }
+ }
+ if (data->cursor_fb[i].fb_id) {
+ igt_remove_fb(data->display.drm_fd, &data->cursor_fb[i]);
+ data->cursor_fb[i].fb_id = 0;
+ }
+ }
+}
+
+static void prepare_test(struct data *data)
+{
+ int i, j;
+ int num_connectors;
+ int num_cpus = (int) sysconf(_SC_NPROCESSORS_ONLN);
+
+ data->number_of_cores = min(num_cpus, MAX_CORES);
+
+ for (i = 0; i < IGT_MAX_PIPES; i++) {
+ for (j = 0; j < MAX_PLANES; j++)
+ data->fb[i * MAX_PLANES + j].fb_id = 0;
+ data->cursor_fb[i].fb_id = 0;
+ data->num_planes[i] = -1;
+ data->last_mode[i] = NULL;
+ sem_init(&data->gpu_thread_pause_ack[i], 0, 0);
+ }
+
+ start_cpu_threads(data);
+ data->mode_resources = drmModeGetResources(data->drm_fd);
+ if (!data->mode_resources) {
+ igt_warn("drmModeGetResources failed: %s\n", strerror(errno));
+ return;
+ }
+
+ num_connectors = data->mode_resources->count_connectors;
+ num_connectors = max(num_connectors, IGT_MAX_PIPES);
+ memset(data->highest_mode, 0, sizeof(drmModeModeInfo *) * IGT_MAX_PIPES);
+ data->connectors =
+ (drmModeConnectorPtr *)calloc(sizeof(drmModeConnectorPtr) * num_connectors, 1);
+ fill_connector_to_pipe_array(data, data->mode_resources, data->connectors);
+
+ for (i = 0; i < IGT_MAX_PIPES; i++) {
+ drmModeConnector *connector = (drmModeConnector *)data->connectors[i];
+
+ if (!connector)
+ continue;
+
+ if (!data->highest_mode[i]) {
+ if (connector->count_modes)
+ data->highest_mode[i] = find_highest_mode(connector);
+ }
+ igt_assert(data->highest_mode[i]);
+
+ if (data->highest_mode[i]) {
+ igt_info("Using mode: \n");
+ kmstest_dump_mode(data->highest_mode[i]);
+ data->pipe_crc[i] = igt_pipe_crc_new(data->drm_fd, i,
+ INTEL_PIPE_CRC_SOURCE_AUTO);
+ } else
+ data->pipe_crc[i] = NULL;
+
+ if (data->num_planes[i] == -1)
+ data->num_planes[i] = data->display.pipes[i].n_planes;
+
+ igt_info("Max number of planes is %d for pipe %d\n",
+ data->num_planes[i], i);
+ }
+
+ create_framebuffers(data);
+ start_gpu_threads(data);
+}
+
+static void finish_test(struct data *data)
+{
+ int i;
+
+ stop_gpu_threads(data);
+
+ /*
+ * As we change tiling/format we need a new FB
+ */
+ destroy_framebuffers(data);
+
+ for (i = 0; i < IGT_MAX_PIPES; i++) {
+ data->num_planes[i] = -1;
+ data->last_mode[i] = NULL;
+ if (data->pipe_crc[i])
+ igt_pipe_crc_free(data->pipe_crc[i]);
+ }
+
+ stop_cpu_threads(data);
+ release_connectors(data->connectors);
+ drmModeFreeResources(data->mode_resources);
+}
+
+struct data data = {
+ .format = DRM_FORMAT_XRGB8888,
+ .modifier = DRM_FORMAT_MOD_LINEAR,
+ .devid = 0,
+ .bops = NULL
+};
+
+
+igt_main {
+ uint8_t format_idx = 0, tiling_idx = 0;
+
+ igt_fixture {
+ data.drm_fd = data.display.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+
+ kmstest_set_vt_graphics_mode();
+
+ igt_display_require(&data.display, data.display.drm_fd);
+ igt_require(data.display.is_atomic);
+ igt_display_require_output(&data.display);
+ data.devid = intel_get_drm_devid(data.drm_fd);
+ igt_require_gem(data.drm_fd);
+ }
+
+ for (format_idx = 0; format_idx < N_FORMATS; format_idx++) {
+ for (tiling_idx = 0; tiling_idx < N_TILING_METHODS; tiling_idx++) {
+ data.format = formats[format_idx];
+ data.modifier = tilings[tiling_idx];
+
+ igt_describe("Start pipe stress test, utilizing cpu and gpu "
+ "simultaneously with maximum amount of planes "
+ "and resolution.");
+ igt_subtest_f("stress-%s-%s",
+ format_str(format_idx),
+ tiling_str(tiling_idx)) {
+
+ igt_skip_on(!igt_display_has_format_mod(&data.display,
+ formats[format_idx],
+ tilings[tiling_idx]));
+
+ prepare_test(&data);
+ stress(&data);
+ finish_test(&data);
+ }
+ }
+ }
+
+ igt_fixture {
+ igt_display_fini(&data.display);
+ }
+}
diff --git a/tests/meson.build b/tests/meson.build
index b548dc3b44..8f217e401c 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -215,6 +215,7 @@ i915_progs = [
'i915_hangman',
'i915_module_load',
'i915_pciid',
+ 'i915_pipe_stress',
'i915_pm_backlight',
'i915_pm_lpsp',
'i915_pm_rpm',
--
2.24.1.485.gad05a3d8e5
More information about the igt-dev
mailing list