[igt-dev] [PATCH i-g-t v3 1/5] lib/igt_pci: helpers to get PCI capabilities offset

Bernatowicz, Marcin marcin.bernatowicz at linux.intel.com
Wed Dec 7 17:27:55 UTC 2022



On 11/30/2022 1:56 PM, Nilawar, Badal wrote:
> 
> 
> On 30-11-2022 18:13, Kamil Konieczny wrote:
>> Hi,
>>
>> On 2022-11-29 at 17:30:54 +0530, Nilawar, Badal wrote:
>>> Hi Anshuman,
>>>
>>> On 23-11-2022 14:24, Anshuman Gupta wrote:
>>>> Added helper functions to search for PCI capabilities
>>>> with help of libpciaccess library.
>>>>
>>>> Cc: Ashutosh Dixit <ashutosh.dixit at intel.com>
>>>> Co-developed-by: Marcin Bernatowicz 
>>>> <marcin.bernatowicz at linux.intel.com>
>>>> Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz at linux.intel.com>
>>>> Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
>>>> ---
>>>>    lib/igt_pci.c   | 44 ++++++++++++++++++++++++++++++++++++++++++++
>>>>    lib/igt_pci.h   | 32 ++++++++++++++++++++++++++++++++
>>>>    lib/meson.build |  1 +
>>>>    3 files changed, 77 insertions(+)
>>>>    create mode 100644 lib/igt_pci.c
>>>>    create mode 100644 lib/igt_pci.h
>>>>
>>>> diff --git a/lib/igt_pci.c b/lib/igt_pci.c
>>>> new file mode 100644
>>>> index 0000000000..bc0369341d
>>>> --- /dev/null
>>>> +++ b/lib/igt_pci.c
>>>> @@ -0,0 +1,44 @@
>>>> +// SPDX-License-Identifier: MIT
>>>> +/*
>>>> + * Copyright © 2022 Intel Corporation
>>>> + */
>>>> +
>>>> +#include <pciaccess.h>
>>>> +#include "igt_pci.h"
>>>> +
>>>> +/**
>>>> + * find_pci_cap_offset:
>>>> + * @dev: pci device
>>>> + * @cap_id: searched capability id, 0 means any capability
>>>> + * @start_offset: offset in config space from which we start searching
>>>> + *
>>>> + * return:
>>>> + * -1 on config read error, 0 if capability is not found,
>>>> + * otherwise offset at which capability with cap_id is found
>>>> + */
>>>> +int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id 
>>>> cap_id,
>>>> +               int start_offset)
>>>> +{
>>>> +    uint8_t offset;
>>>> +    uint16_t cap_header;
>>>> +    int loop = (PCI_CFG_SPACE_SIZE - PCI_TYPE0_1_HEADER_SIZE)
>>>> +            / sizeof(cap_header);
>>>> +
>>>> +    if (pci_device_cfg_read_u8(dev, &offset, start_offset))
>>>> +        return -1;
>>>> +
>>>> +    while (loop--) {
>>>> +        if (offset < PCI_TYPE0_1_HEADER_SIZE)
>>>> +            break;
>>>> +
>>>> +        if (pci_device_cfg_read_u16(dev, &cap_header, (offset & 
>>>> 0xFC)))
>>>> +            return -1;
>>>> +
>>>> +        if (!cap_id || cap_id == (cap_header & 0xFF))
>>>> +            return offset;
>>>> +
>>>> +        offset = cap_header >> 8;
>>> For the last capability, next capability address will always be 0. So 
>>> above
>>> instead of using while(loop--) we can use while(offset).
>>>
>>> Regards,
>>> Badal
>>
>> This way we are guarded for endless looping, btw check for zero
>> is just at loop enter (first if).
> Agreed.
> 
> It is seen that when config space inaccessible it throws value 0xff.
> So inside loop we should check if offset or capid != 0xff and break the 
> loop otherwise.

In such case I would expect pci_device_cfg_read_XXX to return != 0 => 
break the loop.
>>
>>>> +    }
>>>> +
>>
>> I would like to see additional check here:
>>
>>     if (loop <= 0 && offset)
>>         return -1;
>>
>> or maybe assert here ?
>>
>>>> +    return 0;
>>>> +}
>>>> diff --git a/lib/igt_pci.h b/lib/igt_pci.h
>>>> new file mode 100644
>>>> index 0000000000..68afd2dacb
>>>> --- /dev/null
>>>> +++ b/lib/igt_pci.h
>>>> @@ -0,0 +1,32 @@
>>>> +// SPDX-License-Identifier: MIT
>>>> +/*
>>>> + * Copyright © 2022 Intel Corporation
>>>> + */
>>>> +
>>>> +#ifndef __IGT_PCI_H__
>>>> +#define __IGT_PCI_H__
>>>> +
>>>> +#include <stdint.h>
>>>> +#include <endian.h>
>>>> +
>>>> +/* forward declaration */
>>>> +struct pci_device;
>>>> +
>>>> +#define PCI_TYPE0_1_HEADER_SIZE 0x40
>>>> +#define PCI_CAPS_START 0x34
>>>> +#define PCI_CFG_SPACE_SIZE 0x100
>>>> +#define PCIE_CFG_SPACE_SIZE 0x1000
>> ------------ ^
>> Remove this, it is unused.
>>
>>>> +
>>>> +enum pci_cap_id {
>>>> +    PCI_EXPRESS_CAP_ID = 0x10
>>>> +};
>>>> +
>>>> +int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id 
>>>> cap_id,
>>>> +               int start_offset);
>>>> +
>>>> +static inline int find_pci_cap_offset(struct pci_device *dev, enum 
>>>> pci_cap_id cap_id)
>> ---- ^ ---- ^
>> Remove this, it is work for optimizitaion in compiler, no need
>> for it here.
>> Btw do you expect user to use both functions ?
>>
>> +cc Marcin
>>
>> Regards,
>> Kamil
>>
>>>> +{
>>>> +    return find_pci_cap_offset_at(dev, cap_id, PCI_CAPS_START);
>>>> +}
>>>> +
>>>> +#endif
>>>> diff --git a/lib/meson.build b/lib/meson.build
>>>> index cef2d0ff3d..e0fb7ddfed 100644
>>>> --- a/lib/meson.build
>>>> +++ b/lib/meson.build
>>>> @@ -33,6 +33,7 @@ lib_sources = [
>>>>        'igt_pipe_crc.c',
>>>>        'igt_power.c',
>>>>        'igt_primes.c',
>>>> +    'igt_pci.c',
>>>>        'igt_rand.c',
>>>>        'igt_stats.c',
>>>>        'igt_syncobj.c',


More information about the igt-dev mailing list