[igt-dev] [PATCH i-g-t 3/3] tests/gem_ccs: Add block-multicopy subtest
Karolina Stolarek
karolina.stolarek at intel.com
Tue Dec 13 15:40:38 UTC 2022
On 12.12.2022 13:50, Zbigniew Kempczyński wrote:
> Exercise sequence of blits packed in single batch. It may reveal
> flushing/decompressing/detiling problems during execution.
> multicopy-inplace version differs from copy-inplace version with
> additional blit to same tiling format during decompression to separate
> problems visible in decompressing/detiling in one step.
>
> Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski at intel.com>
> ---
> tests/i915/gem_ccs.c | 262 ++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 246 insertions(+), 16 deletions(-)
>
> diff --git a/tests/i915/gem_ccs.c b/tests/i915/gem_ccs.c
> index 4ecb3e36ac..6b5f199ec7 100644
> --- a/tests/i915/gem_ccs.c
> +++ b/tests/i915/gem_ccs.c
> @@ -262,6 +262,119 @@ static void surf_copy(int i915,
> gem_close(i915, ccs);
> }
>
> +struct blt_copy3_data {
> + int i915;
> + struct blt_copy_object src;
> + struct blt_copy_object mid;
> + struct blt_copy_object dst;
> + struct blt_copy_object final;
> + struct blt_copy_batch bb;
> + enum blt_color_depth color_depth;
> +
> + /* debug stuff */
> + bool print_bb;
> +};
> +
> +struct blt_block_copy3_data_ext {
> + struct blt_block_copy_object_ext src;
> + struct blt_block_copy_object_ext mid;
> + struct blt_block_copy_object_ext dst;
> + struct blt_block_copy_object_ext final;
> +};
> +
> +#define FILL_OBJ(_idx, _handle, _offset, _flags) do { \
> + obj[(_idx)].handle = (_handle); \
> + obj[(_idx)].offset = (_offset); \
> + obj[(_idx)++].flags = EXEC_OBJECT_PINNED | \
> + EXEC_OBJECT_SUPPORTS_48B_ADDRESS | (_flags) ; \
> +} while (0)
> +
I'm not sure if we want to have a macro with a hidden side effect. "i++"
after each statement isn't pretty either, so I'm on the fence with this one.
> +static int blt_block_copy3(int i915,
> + const intel_ctx_t *ctx,
> + const struct intel_execution_engine2 *e,
> + uint64_t ahnd,
> + const struct blt_copy3_data *blt3,
> + const struct blt_block_copy3_data_ext *ext3)
> +{
> + struct drm_i915_gem_execbuffer2 execbuf = {};
> + struct drm_i915_gem_exec_object2 obj[5] = {};
> + struct blt_copy_data blt0;
> + struct blt_block_copy_data_ext ext0;
> + uint64_t src_offset, mid_offset, dst_offset, final_offset, bb_offset, alignment;
> + uint64_t bb_pos = 0;
> + uint32_t *bb;
> + int i, ret;
> +
> + igt_assert_f(ahnd, "block-copy3 supports softpin only\n");
> + igt_assert_f(blt3, "block-copy3 requires data to do blit\n");
> +
> + alignment = gem_detect_safe_alignment(i915);
> + src_offset = get_offset(ahnd, blt3->src.handle, blt3->src.size, alignment);
> + mid_offset = get_offset(ahnd, blt3->mid.handle, blt3->mid.size, alignment);
> + dst_offset = get_offset(ahnd, blt3->dst.handle, blt3->dst.size, alignment);
> + final_offset = get_offset(ahnd, blt3->final.handle, blt3->final.size, alignment);
> + bb_offset = get_offset(ahnd, blt3->bb.handle, blt3->bb.size, alignment);
> +
> + igt_debug("src: %lx, mid: %lx, dst: %lx, final: %lx, bb: %lx, align: %lx\n",
> + src_offset, mid_offset, dst_offset, final_offset, bb_offset, alignment);
> +
> + /* First blit src -> mid */
> + memset(&blt0, 0, sizeof(blt0));
> + blt0.src = blt3->src;
> + blt0.dst = blt3->mid;
> + blt0.bb = blt3->bb;
> + blt0.color_depth = blt3->color_depth;
> + blt0.print_bb = blt3->print_bb;
> + ext0.src = ext3->src;
> + ext0.dst = ext3->mid;
> + bb_pos = emit_blt_block_copy(i915, ahnd, &blt0, &ext0, bb_pos, false);
> +
> + /* Second blit mid -> dst */
> + memset(&blt0, 0, sizeof(blt0));
> + blt0.src = blt3->mid;
> + blt0.dst = blt3->dst;
> + blt0.bb = blt3->bb;
> + blt0.color_depth = blt3->color_depth;
> + blt0.print_bb = blt3->print_bb;
> + ext0.src = ext3->mid;
> + ext0.dst = ext3->dst;
> + bb_pos = emit_blt_block_copy(i915, ahnd, &blt0, &ext0, bb_pos, false);
> +
> + /* Third blit dst -> final */
> + memset(&blt0, 0, sizeof(blt0));
> + blt0.src = blt3->dst;
> + blt0.dst = blt3->final;
> + blt0.bb = blt3->bb;
> + blt0.color_depth = blt3->color_depth;
> + blt0.print_bb = blt3->print_bb;
> + ext0.src = ext3->dst;
> + ext0.dst = ext3->final;
> + bb_pos = emit_blt_block_copy(i915, ahnd, &blt0, &ext0, bb_pos, true);
> +
> + i = 0;
> + FILL_OBJ(i, blt3->src.handle, CANONICAL(src_offset), 0);
> + FILL_OBJ(i, blt3->mid.handle, CANONICAL(mid_offset), EXEC_OBJECT_WRITE);
> + if (mid_offset != dst_offset)
> + FILL_OBJ(i, blt3->dst.handle, CANONICAL(dst_offset), EXEC_OBJECT_WRITE);
> + FILL_OBJ(i, blt3->final.handle, CANONICAL(final_offset), 0);
> + FILL_OBJ(i, blt3->bb.handle, CANONICAL(bb_offset), 0);
> +
> + execbuf.buffer_count = i;
> +
> + for (int __i = 0; __i < i; __i++)
> + igt_debug("obj[%d].offset: %llx, handle: %u\n",
> + __i, (long long) obj[__i].offset, obj[__i].handle);
> + execbuf.buffers_ptr = to_user_pointer(obj);
> + execbuf.rsvd1 = ctx ? ctx->id : 0;
> + execbuf.flags = e ? e->flags : I915_EXEC_BLT;
> + ret = __gem_execbuf(i915, &execbuf);
> +
> + gem_sync(i915, blt3->bb.handle);
> + munmap(bb, blt3->bb.size);
> +
> + return ret;
> +}
> +
> static void block_copy(int i915,
> const intel_ctx_t *ctx,
> const struct intel_execution_engine2 *e,
> @@ -380,10 +493,100 @@ static void block_copy(int i915,
> igt_assert_f(!result, "source and destination surfaces differs!\n");
> }
>
> +static void block_multicopy(int i915,
> + const intel_ctx_t *ctx,
> + const struct intel_execution_engine2 *e,
> + uint32_t region1, uint32_t region2,
> + enum blt_tiling mid_tiling,
> + const struct test_config *config)
> +{
> + struct blt_copy3_data blt3 = {};
> + struct blt_block_copy3_data_ext ext3 = {}, *pext3 = &ext3;
> + struct blt_copy_object *src, *mid, *dst, *final;
> + const uint32_t bpp = 32;
> + uint64_t bb_size = 4096;
> + uint64_t ahnd = get_reloc_ahnd(i915, ctx->id);
> + uint32_t run_id = mid_tiling;
> + uint32_t mid_region = region2, bb;
> + uint32_t width = param.width, height = param.height;
> + enum blt_compression mid_compression = config->compression;
> + int mid_compression_format = param.compression_format;
> + enum blt_compression_type comp_type = COMPRESSION_TYPE_3D;
> + uint8_t uc_mocs = intel_get_uc_mocs(i915);
> + int result;
> +
> + igt_assert(__gem_create_in_memory_regions(i915, &bb, &bb_size, region1) == 0);
> +
> + if (!blt_supports_compression(i915))
> + pext3 = NULL;
> +
> + src = create_object(i915, region1, width, height, bpp, uc_mocs,
> + T_LINEAR, COMPRESSION_DISABLED, comp_type, true);
> + mid = create_object(i915, mid_region, width, height, bpp, uc_mocs,
> + mid_tiling, mid_compression, comp_type, true);
> + dst = create_object(i915, region1, width, height, bpp, uc_mocs,
> + mid_tiling, COMPRESSION_DISABLED, comp_type, true);
> + final = create_object(i915, region1, width, height, bpp, uc_mocs,
> + T_LINEAR, COMPRESSION_DISABLED, comp_type, true);
> + igt_assert(src->size == dst->size);
> + PRINT_SURFACE_INFO("src", src);
> + PRINT_SURFACE_INFO("mid", mid);
> + PRINT_SURFACE_INFO("dst", dst);
> + PRINT_SURFACE_INFO("final", final);
> +
> + blt_surface_fill_rect(i915, src, width, height);
> +
> + memset(&blt3, 0, sizeof(blt3));
> + blt3.color_depth = CD_32bit;
> + blt3.print_bb = param.print_bb;
> + set_blt_object(&blt3.src, src);
> + set_blt_object(&blt3.mid, mid);
> + set_blt_object(&blt3.dst, dst);
> + set_blt_object(&blt3.final, final);
> +
> + if (config->inplace) {
> + set_object(&blt3.dst, mid->handle, dst->size, mid->region, mid->mocs,
> + mid_tiling, COMPRESSION_DISABLED, comp_type);
> + blt3.dst.ptr = mid->ptr;
> + }
> +
> + set_object_ext(&ext3.src, 0, width, height, SURFACE_TYPE_2D);
> + set_object_ext(&ext3.mid, mid_compression_format, width, height, SURFACE_TYPE_2D);
> + set_object_ext(&ext3.dst, 0, width, height, SURFACE_TYPE_2D);
> + set_object_ext(&ext3.final, 0, width, height, SURFACE_TYPE_2D);
> + set_batch(&blt3.bb, bb, bb_size, region1);
> +
> + blt_block_copy3(i915, ctx, e, ahnd, &blt3, pext3);
> + gem_sync(i915, blt3.final.handle);
> +
> + WRITE_PNG(i915, run_id, "src", &blt3.src, width, height);
> + if (!config->inplace)
> + WRITE_PNG(i915, run_id, "mid", &blt3.mid, width, height);
> + WRITE_PNG(i915, run_id, "dst", &blt3.dst, width, height);
> + WRITE_PNG(i915, run_id, "final", &blt3.final, width, height);
> +
> + result = memcmp(src->ptr, blt3.final.ptr, src->size);
> +
> + destroy_object(i915, src);
> + destroy_object(i915, mid);
> + destroy_object(i915, dst);
> + destroy_object(i915, final);
> + gem_close(i915, bb);
> + put_ahnd(ahnd);
> +
> + igt_assert_f(!result, "source and destination surfaces differs!\n");
> +}
> +
> +enum copy_func {
> + BLOCK_COPY,
> + BLOCK_MULTICOPY,
> +};
> +
I was thinking if we need a simple case here (i.e. one emit, src->dst)
> static void block_copy_test(int i915,
> const struct test_config *config,
> const intel_ctx_t *ctx,
> - struct igt_collection *set)
> + struct igt_collection *set,
> + enum copy_func copy_function)
> {
> struct igt_collection *regions;
> const struct intel_execution_engine2 *e;
> @@ -415,15 +618,27 @@ static void block_copy_test(int i915,
> continue;
>
> regtxt = memregion_dynamic_subtest_name(regions);
> - igt_dynamic_f("%s-%s-compfmt%d-%s",
> - blt_tiling_name(tiling),
> - config->compression ?
> - "compressed" : "uncompressed",
> - param.compression_format, regtxt) {
> - block_copy(i915, ctx, e,
> - region1, region2,
> - tiling, config);
> - }
> +
> + if (copy_function == BLOCK_COPY)
> + igt_dynamic_f("%s-%s-compfmt%d-%s",
> + blt_tiling_name(tiling),
> + config->compression ?
> + "compressed" : "uncompressed",
> + param.compression_format, regtxt) {
> + block_copy(i915, ctx, e,
> + region1, region2,
> + tiling, config);
> + }
> + else if (copy_function == BLOCK_MULTICOPY)
> + igt_dynamic_f("%s-%s-compfmt%d-%s-multicopy",
> + blt_tiling_name(tiling),
> + config->compression ?
> + "compressed" : "uncompressed",
> + param.compression_format, regtxt) {
> + block_multicopy(i915, ctx, e,
> + region1, region2,
> + tiling, config);
> + }
We could avoid repetition to some extent if we had introduced a macro
that accepts a function pointer and/or some config data. But I don't
feel strongly about it, just putting it out there.
Many thanks,
Karolina
> free(regtxt);
> }
> }
> @@ -506,14 +721,21 @@ igt_main_args("bf:pst:W:H:", NULL, help_str, opt_handler, NULL)
> igt_subtest_with_dynamic("block-copy-uncompressed") {
> struct test_config config = {};
>
> - block_copy_test(i915, &config, ctx, set);
> + block_copy_test(i915, &config, ctx, set, BLOCK_COPY);
> }
>
> igt_describe("Check block-copy flatccs compressed blit");
> igt_subtest_with_dynamic("block-copy-compressed") {
> struct test_config config = { .compression = true };
>
> - block_copy_test(i915, &config, ctx, set);
> + block_copy_test(i915, &config, ctx, set, BLOCK_COPY);
> + }
> +
> + igt_describe("Check block-multicopy flatccs compressed blit");
> + igt_subtest_with_dynamic("block-multicopy-compressed") {
> + struct test_config config = { .compression = true };
> +
> + block_copy_test(i915, &config, ctx, set, BLOCK_MULTICOPY);
> }
>
> igt_describe("Check block-copy flatccs inplace decompression blit");
> @@ -521,7 +743,15 @@ igt_main_args("bf:pst:W:H:", NULL, help_str, opt_handler, NULL)
> struct test_config config = { .compression = true,
> .inplace = true };
>
> - block_copy_test(i915, &config, ctx, set);
> + block_copy_test(i915, &config, ctx, set, BLOCK_COPY);
> + }
> +
> + igt_describe("Check block-multicopy flatccs inplace decompression blit");
> + igt_subtest_with_dynamic("block-multicopy-inplace") {
> + struct test_config config = { .compression = true,
> + .inplace = true };
> +
> + block_copy_test(i915, &config, ctx, set, BLOCK_MULTICOPY);
> }
>
> igt_describe("Check flatccs data can be copied from/to surface");
> @@ -529,7 +759,7 @@ igt_main_args("bf:pst:W:H:", NULL, help_str, opt_handler, NULL)
> struct test_config config = { .compression = true,
> .surfcopy = true };
>
> - block_copy_test(i915, &config, ctx, set);
> + block_copy_test(i915, &config, ctx, set, BLOCK_COPY);
> }
>
> igt_describe("Check flatccs data are physically tagged and visible"
> @@ -539,7 +769,7 @@ igt_main_args("bf:pst:W:H:", NULL, help_str, opt_handler, NULL)
> .surfcopy = true,
> .new_ctx = true };
>
> - block_copy_test(i915, &config, ctx, set);
> + block_copy_test(i915, &config, ctx, set, BLOCK_COPY);
> }
>
> igt_describe("Check flatccs data persists after suspend / resume (S0)");
> @@ -548,7 +778,7 @@ igt_main_args("bf:pst:W:H:", NULL, help_str, opt_handler, NULL)
> .surfcopy = true,
> .suspend_resume = true };
>
> - block_copy_test(i915, &config, ctx, set);
> + block_copy_test(i915, &config, ctx, set, BLOCK_COPY);
> }
>
> igt_fixture {
More information about the igt-dev
mailing list