[igt-dev] [PATCH i-g-t 3/6] tests/i915/kms_dsc: Enable validation for VDSC YCbCr420
Nautiyal, Ankit K
ankit.k.nautiyal at intel.com
Fri Dec 23 11:39:34 UTC 2022
Hi Swati,
This looks better now. Few suggestions/comments inline:
On 11/25/2022 5:28 PM, Swati Sharma wrote:
> Existing i-g-t is extended to enable validation for VDSC YCbCr420.
> If a mode is supported in both RGB and YCbCr420 output formats by the
> sink, i915 driver policy is to try RGB first and fall back to YCbCr420, if
> mode cannot be shown using RGB. To test YCbCr420, we need a debugfs
> entry (force_dsc_ycbcr420) to force this output format; so that YCbCr420 code
> gets executed.
> From i-g-t, we have set this debugfs entry. However, before setting
> debugfs entry, we have checked capability i.e. YCbCr420 is supported by
> both platform (D14+) and sink.
> Also, all the modes doesn't support both YCbCr420 and RGB formats; so if
> sink and platform supports YCbCr420 we will do try commit with each mode
> till we get a successful commit.
>
> v2: -used is_dsc_ycbcr420_supported() (Ankit)
> -handled try-commit correctly (Ankit)
> -instead of flag use enum for output formats (Ankit)
>
> Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
> ---
> tests/i915/kms_dsc.c | 195 ++++++++++++++++++++++++++++++++-----------
> 1 file changed, 147 insertions(+), 48 deletions(-)
>
> diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c
> index 6fef764de..6a3eecdb4 100644
> --- a/tests/i915/kms_dsc.c
> +++ b/tests/i915/kms_dsc.c
> @@ -53,6 +53,11 @@ enum dsc_test_type {
> TEST_DSC_BPC
> };
>
> +enum dsc_output_format {
> + DSC_FORMAT_RGB444,
> + DSC_FORMAT_YCBCR420
> +};
> +
> typedef struct {
> int drm_fd;
> uint32_t devid;
> @@ -66,7 +71,10 @@ typedef struct {
> } data_t;
>
> bool force_dsc_en_orig;
> +bool force_dsc_ycbcr420_en_orig;
> int force_dsc_restore_fd = -1;
> +int force_dsc_ycbcr420_restore_fd = -1;
> +static int count = 0;
>
> const struct {
> const int format;
> @@ -107,6 +115,16 @@ static void force_dsc_enable_bpc(data_t *data)
> igt_assert_f(ret > 0, "forcing input dsc bpc debugfs_write failed\n");
> }
>
> +static void force_dsc_ycbcr420_enable(data_t *data)
> +{
> + int ret;
> +
> + igt_debug("Forcing DSC YCbCr420 on %s\n", data->output->name);
> + ret = igt_force_dsc_ycbcr420_enable(data->drm_fd,
> + data->output->name);
> + igt_assert_f(ret > 0, "forcing dsc ycbcr420 debugfs_write failed\n");
> +}
> +
> static void save_force_dsc_en(data_t *data)
> {
> force_dsc_en_orig =
> @@ -130,9 +148,34 @@ static void restore_force_dsc_en(void)
> force_dsc_restore_fd = -1;
> }
>
> +static void save_force_dsc_ycbcr420_en(data_t *data)
> +{
> + force_dsc_ycbcr420_en_orig =
> + igt_is_force_dsc_ycbcr420_enabled(data->drm_fd,
> + data->output->name);
> + force_dsc_ycbcr420_restore_fd =
> + igt_get_dsc_ycbcr420_debugfs_fd(data->drm_fd,
> + data->output->name);
> + igt_assert(force_dsc_ycbcr420_restore_fd >= 0);
> +}
> +
> +static void restore_force_dsc_ycbcr420_en(void)
> +{
> + if (force_dsc_ycbcr420_restore_fd < 0)
> + return;
> +
> + igt_debug("Restoring DSC YCbCr420 enable\n");
> + igt_assert(write(force_dsc_ycbcr420_restore_fd, force_dsc_ycbcr420_en_orig ? "1" : "0", 1) == 1);
> +
> + close(force_dsc_ycbcr420_restore_fd);
> + force_dsc_ycbcr420_restore_fd = -1;
> +}
> +
> +
> static void kms_dsc_exit_handler(int sig)
> {
> restore_force_dsc_en();
> + restore_force_dsc_ycbcr420_en();
> }
>
> static drmModeModeInfo *get_highres_mode(igt_output_t *output)
> @@ -147,6 +190,20 @@ static drmModeModeInfo *get_highres_mode(igt_output_t *output)
> return highest_mode;
> }
>
> +static drmModeModeInfo *get_next_mode(igt_output_t *output)
> +{
> + drmModeConnector *connector = output->config.connector;
> + drmModeModeInfo *next_mode = NULL;
> +
> + for (int i = count; i < connector->count_modes; i++) {
> + next_mode = &connector->modes[i];
> + count ++;
No space before the unary increment operator.
> + break;
> + }
> +
> + return next_mode;
> +}
> +
> static bool check_dsc_on_connector(data_t *data)
> {
> igt_output_t *output = data->output;
> @@ -167,6 +224,19 @@ static bool check_dsc_on_connector(data_t *data)
> return true;
> }
>
> +static bool is_dsc_ycbcr420_supported(data_t *data)
> +{
> + igt_output_t *output = data->output;
> +
> + if (!igt_is_dsc_ycbcr420_supported(data->drm_fd, output->name)) {
> + igt_debug("DSC YCbCr420 not supported on connector %s\n",
> + output->name);
> + return false;
> + }
> +
> + return true;
> +}
> +
> static bool check_big_joiner_pipe_constraint(data_t *data)
> {
> igt_output_t *output = data->output;
> @@ -224,75 +294,100 @@ static void test_cleanup(data_t *data)
>
> /* re-probe connectors and do a modeset with DSC */
> static void update_display(data_t *data, enum dsc_test_type test_type,
> - unsigned int plane_format)
> + unsigned int plane_format, enum dsc_output_format output_format)
> {
> + int ret;
> bool enabled;
> igt_plane_t *primary;
> drmModeModeInfo *mode;
> + bool test_complete = false;
> igt_output_t *output = data->output;
> igt_display_t *display = &data->display;
>
> - /* sanitize the state before starting the subtest */
> - igt_display_reset(display);
> - igt_display_commit(display);
> + count = 0;
> + while (!test_complete) {
> + /* sanitize the state before starting the subtest */
> + igt_display_reset(display);
> + igt_display_commit(display);
>
> - igt_debug("DSC is supported on %s\n", data->output->name);
> - save_force_dsc_en(data);
> - force_dsc_enable(data);
> + igt_debug("DSC is supported on %s\n", data->output->name);
> + save_force_dsc_en(data);
> + force_dsc_enable(data);
>
> - if (test_type == TEST_DSC_BPC) {
> - igt_debug("Trying to set input BPC to %d\n", data->input_bpc);
> - force_dsc_enable_bpc(data);
> - }
> + if (output_format == DSC_FORMAT_YCBCR420) {
> + igt_debug("DSC YCbCr420 is supported on %s\n", data->output->name);
> + save_force_dsc_ycbcr420_en(data);
> + force_dsc_ycbcr420_enable(data);
> + }
>
> - igt_output_set_pipe(output, data->pipe);
> + if (test_type == TEST_DSC_BPC) {
> + igt_debug("Trying to set input BPC to %d\n", data->input_bpc);
> + force_dsc_enable_bpc(data);
> + }
>
> - mode = get_highres_mode(output);
> - igt_require(mode != NULL);
> - igt_output_override_mode(output, mode);
> + igt_output_set_pipe(output, data->pipe);
>
> - primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> + if (output_format == DSC_FORMAT_YCBCR420)
> + mode = get_next_mode(output);
If we pass the count, or to be precise the current mode index, we can
avoid having a global count.
> + else
> + mode = get_highres_mode(output);
>
> - igt_skip_on(!igt_plane_has_format_mod(primary, plane_format,
> - DRM_FORMAT_MOD_LINEAR));
> + igt_require(mode != NULL);
> + igt_output_override_mode(output, mode);
>
> - igt_create_pattern_fb(data->drm_fd,
> - mode->hdisplay,
> - mode->vdisplay,
> - plane_format,
> - DRM_FORMAT_MOD_LINEAR,
> - &data->fb_test_pattern);
> + primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
>
> - igt_plane_set_fb(primary, &data->fb_test_pattern);
> - igt_display_commit(display);
> + igt_skip_on(!igt_plane_has_format_mod(primary, plane_format,
> + DRM_FORMAT_MOD_LINEAR));
>
> - /* until we have CRC check support, manually check if RGB test
> - * pattern has no corruption.
> - */
> - manual("RGB test pattern without corruption");
> + igt_create_pattern_fb(data->drm_fd,
> + mode->hdisplay,
> + mode->vdisplay,
> + plane_format,
> + DRM_FORMAT_MOD_LINEAR,
> + &data->fb_test_pattern);
>
> - enabled = igt_is_dsc_enabled(data->drm_fd, output->name);
> - igt_info("Current mode is: %dx%d @%dHz -- DSC is: %s\n",
> - mode->hdisplay,
> - mode->vdisplay,
> - mode->vrefresh,
> - enabled ? "ON" : "OFF");
> + igt_plane_set_fb(primary, &data->fb_test_pattern);
> + ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> + if (ret == 0) {
> + igt_display_commit(display);
> + test_complete = true;
> + } else if (output_format == DSC_FORMAT_YCBCR420) {
> + continue;
> + }
>
> - restore_force_dsc_en();
> - igt_debug("Reset compression BPC\n");
> - data->input_bpc = 0;
> - force_dsc_enable_bpc(data);
> + igt_assert_eq(ret, 0);
> +
> + /* until we have CRC check support, manually check if RGB test
> + * pattern has no corruption.
> + */
> + manual("RGB test pattern without corruption");
> +
> + enabled = igt_is_dsc_enabled(data->drm_fd, output->name);
> + igt_info("Current mode is: %dx%d @%dHz -- DSC is: %s\n",
> + mode->hdisplay,
> + mode->vdisplay,
> + mode->vrefresh,
> + enabled ? "ON" : "OFF");
I think we can print the output_format with which DSC was used here
Thanks & Regards,
Ankit
> +
> + restore_force_dsc_en();
> + if (output_format == DSC_FORMAT_YCBCR420)
> + restore_force_dsc_ycbcr420_en();
> + igt_debug("Reset compression BPC\n");
> + data->input_bpc = 0;
> + force_dsc_enable_bpc(data);
>
> - igt_assert_f(enabled,
> - "Default DSC enable failed on connector: %s pipe: %s\n",
> - output->name,
> - kmstest_pipe_name(data->pipe));
> + igt_assert_f(enabled,
> + "Default DSC enable failed on connector: %s pipe: %s\n",
> + output->name,
> + kmstest_pipe_name(data->pipe));
>
> - test_cleanup(data);
> + test_cleanup(data);
> + }
> }
>
> static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
> - unsigned int plane_format)
> + unsigned int plane_format, enum dsc_output_format output_format)
> {
> igt_display_t *display = &data->display;
> igt_output_t *output;
> @@ -322,14 +417,18 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
> snprintf(name, sizeof(name), "-%s", igt_format_str(plane_format));
>
> igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(data->pipe), data->output->name, name)
> - update_display(data, test_type, plane_format);
> + update_display(data, test_type, plane_format, output_format);
> }
> }
>
> static void run_test(data_t *data, enum dsc_test_type test_type, int bpc,
> unsigned int plane_format)
> {
> - test_dsc(data, test_type, bpc, plane_format);
> + test_dsc(data, test_type, bpc, plane_format, DSC_FORMAT_RGB444);
> +
> + /* YCbCr420 DSC is supported on display version 14+ */
> + if ((data->disp_ver >= 14) && (is_dsc_ycbcr420_supported(data)))
> + test_dsc(data, test_type, bpc, plane_format, DSC_FORMAT_YCBCR420);
> }
>
> igt_main
More information about the igt-dev
mailing list