[igt-dev] [v3 9/9] tests/kms_plane_scaling: Refactor clipping-clamping subtest
Swati Sharma
swati2.sharma at intel.com
Tue Feb 8 05:50:39 UTC 2022
Reused same logic as other subtests (tiling, pixel-format)
to make it consistent. Now, this subtest is tested for
all planes.
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
tests/kms_plane_scaling.c | 159 ++++++++++++++------------------------
1 file changed, 56 insertions(+), 103 deletions(-)
diff --git a/tests/kms_plane_scaling.c b/tests/kms_plane_scaling.c
index 29e85aa3..cd5a04b3 100644
--- a/tests/kms_plane_scaling.c
+++ b/tests/kms_plane_scaling.c
@@ -84,45 +84,16 @@ static void cleanup_crtc(data_t *data)
cleanup_fbs(data);
}
-static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe,
- igt_plane_t *plane, drmModeModeInfo *mode)
+static bool test_pipe_iteration(data_t *data, enum pipe pipe, int iteration)
{
- igt_display_t *display = &data->display;
- uint64_t modifier = is_i915_device(data->drm_fd) ?
- I915_FORMAT_MOD_X_TILED : DRM_FORMAT_MOD_LINEAR;
-
- cleanup_crtc(data);
-
- igt_output_set_pipe(output, pipe);
+ if (!is_i915_device(data->drm_fd) ||
+ data->extended)
+ return true;
- igt_skip_on(!igt_display_has_format_mod(display, DRM_FORMAT_XRGB8888,
- modifier));
+ if ((pipe > PIPE_B) && (iteration >= 2))
+ return false;
- /* allocate fb for plane 1 */
- igt_create_pattern_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
- DRM_FORMAT_XRGB8888,
- modifier,
- &data->fb[0]);
-
- igt_plane_set_fb(plane, &data->fb[0]);
-
- if (plane->type != DRM_PLANE_TYPE_PRIMARY) {
- igt_plane_t *primary;
- int ret;
-
- /* Do we succeed without enabling the primary plane? */
- ret = igt_display_try_commit2(display, COMMIT_ATOMIC);
- if (!ret)
- return;
-
- /*
- * Fallback: set the primary plane to actually enable the pipe.
- * Some drivers always require the primary plane to be enabled.
- */
- primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(primary, &data->fb[0]);
- }
- igt_display_commit2(display, COMMIT_ATOMIC);
+ return true;
}
static void check_scaling_pipe_plane_rot(data_t *d, igt_plane_t *plane,
@@ -632,18 +603,6 @@ test_invalid_num_scalers(data_t *d, enum pipe pipe, igt_output_t *output)
igt_remove_fb(display->drm_fd, &d->fb[3]);
}
-static bool test_pipe_iteration(data_t *data, enum pipe pipe, int iteration)
-{
- if (!is_i915_device(data->drm_fd) ||
- data->extended)
- return true;
-
- if ((pipe > PIPE_B) && (iteration >= 2))
- return false;
-
- return true;
-}
-
static void test_scaler_with_rotation_pipe(data_t *d, enum pipe pipe,
igt_output_t *output)
{
@@ -726,89 +685,83 @@ static void test_scaler_with_pixel_format_pipe(data_t *d, enum pipe pipe, igt_ou
}
static void
-__test_scaler_with_clipping_clamping_scenario(data_t *d, drmModeModeInfo *mode)
+__test_scaler_with_clipping_clamping(data_t *d, igt_plane_t *plane,
+ uint32_t pixel_format,
+ uint64_t modifier, enum pipe pipe,
+ igt_output_t *output,
+ igt_rotation_t rot)
+
{
- igt_plane_set_fb(d->plane1, &d->fb[1]);
- igt_plane_set_fb(d->plane2, &d->fb[2]);
+ igt_display_t *display = &d->display;
+ int width, height;
+ drmModeModeInfo *mode;
+
+ cleanup_crtc(d);
+
+ igt_output_set_pipe(output, pipe);
+ mode = igt_output_get_mode(output);
- igt_fb_set_position(&d->fb[1], d->plane1, 0, 0);
- igt_fb_set_size(&d->fb[1], d->plane1, 300, 300);
- igt_plane_set_position(d->plane1, 100, 400);
- igt_fb_set_position(&d->fb[2], d->plane2, 0, 0);
- igt_fb_set_size(&d->fb[2], d->plane2, 400, 400);
- igt_plane_set_position(d->plane2, 100, 100);
+ width = mode->hdisplay;
+ height = mode->vdisplay;
+ igt_create_color_fb(display->drm_fd, width, height,
+ pixel_format, modifier, 0.0, 1.0, 0.0, &d->fb[0]);
+ igt_plane_set_fb(plane, &d->fb[0]);
/* scaled window size is outside the modeset area.*/
- igt_plane_set_size(d->plane1, mode->hdisplay + 200,
- mode->vdisplay + 200);
- igt_plane_set_size(d->plane2, mode->hdisplay + 100,
- mode->vdisplay + 100);
+ igt_plane_set_size(plane, mode->hdisplay + 200, mode->vdisplay + 200);
+ igt_plane_set_rotation(plane, rot);
/*
* Can't guarantee that the clipped coordinates are
* suitably aligned for yuv. So allow the commit to fail.
*/
- if (igt_format_is_yuv(d->fb[1].drm_format) ||
- igt_format_is_yuv(d->fb[2].drm_format))
+ if (igt_format_is_yuv(d->fb[0].drm_format))
igt_display_try_commit2(&d->display, COMMIT_ATOMIC);
else
igt_display_commit2(&d->display, COMMIT_ATOMIC);
+
+ igt_plane_set_fb(plane, NULL);
+ igt_remove_fb(display->drm_fd, &d->fb[0]);
}
static void
-test_scaler_with_clipping_clamping_scenario(data_t *d, enum pipe pipe, igt_output_t *output)
+test_scaler_with_clipping_clamping(data_t *d, enum pipe pipe, igt_output_t *output)
{
- igt_pipe_t *pipe_obj = &d->display.pipes[pipe];
- drmModeModeInfo *mode;
- struct igt_vec tested_formats1;
-
- igt_require(get_num_scalers(d, pipe) >= 2);
-
- mode = igt_output_get_mode(output);
- d->plane1 = igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_PRIMARY);
- d->plane2 = igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
- prepare_crtc(d, output, pipe, d->plane1, mode);
+ igt_display_t *display = &d->display;
+ igt_plane_t *plane;
- igt_vec_init(&tested_formats1, sizeof(uint32_t));
+ igt_require(get_num_scalers(d, pipe) > 0);
- for (int i = 0; i < d->plane1->drm_plane->count_formats; i++) {
- unsigned f1 = d->plane1->drm_plane->formats[i];
- struct igt_vec tested_formats2;
+ igt_output_set_pipe(output, pipe);
- if (!test_pipe_iteration(d, pipe, i))
+ for_each_plane_on_pipe(display, pipe, plane) {
+ if (plane->type == DRM_PLANE_TYPE_CURSOR)
continue;
- if (!test_format(d, &tested_formats1, f1) ||
- !can_scale(d, f1))
- continue;
- igt_vec_init(&tested_formats2, sizeof(uint32_t));
+ for (int i = 0; i < ARRAY_SIZE(modifiers); i++) {
+ uint64_t modifier = modifiers[i];
+ struct igt_vec tested_formats;
- igt_create_pattern_fb(d->drm_fd,
- mode->hdisplay, mode->vdisplay, f1,
- I915_FORMAT_MOD_X_TILED, &d->fb[1]);
+ igt_vec_init(&tested_formats, sizeof(uint32_t));
- for (int j = 0; j < d->plane2->drm_plane->count_formats; j++) {
- unsigned f2 = d->plane2->drm_plane->formats[j];
+ for (int j = 0; j < plane->drm_plane->count_formats; j++) {
+ uint32_t format = plane->drm_plane->formats[j];
- if (!test_format(d, &tested_formats2, f2) ||
- !can_scale(d, f2))
- continue;
+ if (!test_pipe_iteration(d, pipe, j))
+ continue;
- igt_create_pattern_fb(d->drm_fd,
- mode->hdisplay, mode->vdisplay, f2,
- I915_FORMAT_MOD_Y_TILED,
- &d->fb[2]);
+ if (test_format(d, &tested_formats, format) &&
+ igt_plane_has_format_mod(plane, format, modifier) &&
+ can_scale(d, format))
+ __test_scaler_with_clipping_clamping(d, plane,
+ format, modifier,
+ pipe, output, IGT_ROTATION_0);
+ }
- __test_scaler_with_clipping_clamping_scenario(d, mode);
- igt_remove_fb(d->drm_fd, &d->fb[2]);
+ igt_vec_fini(&tested_formats);
}
- igt_remove_fb(d->drm_fd, &d->fb[1]);
-
- igt_vec_fini(&tested_formats2);
}
-
- igt_vec_fini(&tested_formats1);
}
static void find_connected_pipe(igt_display_t *display, bool second, enum pipe *pipe, igt_output_t **output)
@@ -1013,7 +966,7 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
igt_subtest_with_dynamic("scaler-with-clipping-clamping") {
for_each_pipe_with_single_output(&data.display, pipe, output)
igt_dynamic_f("pipe-%s-%s-scaler-with-clipping-clamping", kmstest_pipe_name(pipe), igt_output_name(output))
- test_scaler_with_clipping_clamping_scenario(&data, pipe, output);
+ test_scaler_with_clipping_clamping(&data, pipe, output);
}
}
--
2.25.1
More information about the igt-dev
mailing list