[igt-dev] [PATCH i-g-t] tests/kms_display_modes: Add test for clone mode

[B, Jeevan]

> -----Original Message-----
> From: Modem, Bhanuprakash <bhanuprakash.modem at intel.com>
> Sent: Wednesday, June 22, 2022 3:37 PM
> To: B, Jeevan <jeevan.b at intel.com>; igt-dev at lists.freedesktop.org
> Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_display_modes: Add test for
> clone mode
> 
> On Tue-21-06-2022 11:27 pm, Jeevan B wrote:
> > Add test for validation of clone mode.
> >
> > Signed-off-by: Jeevan B <jeevan.b at intel.com>
> > ---
> >   tests/kms_display_modes.c | 83
> +++++++++++++++++++++++++++++++++++++++
> >   1 file changed, 83 insertions(+)
> >
> > diff --git a/tests/kms_display_modes.c b/tests/kms_display_modes.c
> > index eff30cbb..af299dc0 100644
> > --- a/tests/kms_display_modes.c
> > +++ b/tests/kms_display_modes.c
> > @@ -129,6 +129,80 @@ static void run_extendedmode_basic(data_t
> *data, int pipe1, int pipe2)
> >   	igt_assert_crc_equal(&crc[1], &ref_crc[1]);
> >   }
> >
> > +static void run_clonemode_basic(data_t *data, int pipe1, int pipe2) {
> > +	struct igt_fb fbs[2];
> > +	drmModeModeInfo *mode[2];
> > +	igt_output_t *output, *clone_output[2];
> > +	igt_display_t *display = &data->display;
> > +	igt_plane_t *plane[2];
> > +	igt_pipe_crc_t *pipe_crc[2] = { 0 };
> > +	igt_crc_t ref_crc[2], crc[2];
> > +	int count = 0;
> > +
> > +	for_each_connected_output(display, output) {
> > +		clone_output[count] = output;
> > +		count++;
> > +
> > +		if (count > 1)
> > +			break;
> > +	}
> > +
> > +	igt_output_set_pipe(clone_output[0], pipe1);
> > +	igt_output_set_pipe(clone_output[1], pipe2);
> > +
> > +	mode[0] = igt_output_get_mode(clone_output[0]);
> > +	mode[1] = igt_output_get_mode(clone_output[1]);
> > +
> > +	pipe_crc[0] = igt_pipe_crc_new(data->drm_fd, pipe1,
> INTEL_PIPE_CRC_SOURCE_AUTO);
> > +	pipe_crc[1] = igt_pipe_crc_new(data->drm_fd, pipe2,
> > +INTEL_PIPE_CRC_SOURCE_AUTO);
> > +
> > +	igt_create_color_fb(data->drm_fd, mode[0]->hdisplay, mode[0]-
> >vdisplay,
> > +			    DRM_FORMAT_XRGB8888, 0, 1, 0, 0, &fbs[0]);
> > +
> > +	igt_create_color_fb(data->drm_fd, mode[0]->hdisplay, mode[1]-
> >vdisplay,
> > +			    DRM_FORMAT_XRGB8888, 0, 1, 0, 0, &fbs[1]);
> > +
> > +	plane[0] = igt_pipe_get_plane_type(&display->pipes[pipe1],
> DRM_PLANE_TYPE_PRIMARY);
> > +	plane[1] = igt_pipe_get_plane_type(&display->pipes[pipe2],
> > +DRM_PLANE_TYPE_PRIMARY);
> > +
> > +	igt_plane_set_fb(plane[0], &fbs[0]);
> > +	igt_plane_set_fb(plane[1], &fbs[1]);
> > +
> > +	igt_display_commit2(display, COMMIT_ATOMIC);
> > +
> > +	igt_pipe_crc_collect_crc(pipe_crc[0], &ref_crc[0]);
> > +	igt_pipe_crc_collect_crc(pipe_crc[1], &ref_crc[1]);
> > +
> > +	igt_plane_set_fb(plane[0], &fbs[0]);
> > +	igt_plane_set_fb(plane[1], &fbs[1]);
> > +
> > +	igt_display_commit2(display, COMMIT_ATOMIC);
> > +
> > +	igt_pipe_crc_collect_crc(pipe_crc[0], &crc[0]);
> > +	igt_pipe_crc_collect_crc(pipe_crc[1], &crc[1]);
> > +
> > +	/*Clean up*/
> > +	igt_remove_fb(data->drm_fd, &fbs[0]);
> > +	igt_remove_fb(data->drm_fd, &fbs[1]);
> > +
> > +	igt_pipe_crc_free(pipe_crc[0]);
> > +	igt_pipe_crc_free(pipe_crc[1]);
> > +
> > +	igt_output_set_pipe(clone_output[0], PIPE_NONE);
> > +	igt_output_set_pipe(clone_output[1], PIPE_NONE);
> > +
> > +	igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe1],
> > +			 DRM_PLANE_TYPE_PRIMARY), NULL);
> > +	igt_plane_set_fb(igt_pipe_get_plane_type(&display->pipes[pipe2],
> > +			 DRM_PLANE_TYPE_PRIMARY), NULL);
> > +	igt_display_commit2(display, COMMIT_ATOMIC);
> > +
> > +	/*Compare CRC*/
> > +	igt_assert_crc_equal(&crc[0], &ref_crc[0]);
> > +	igt_assert_crc_equal(&crc[1], &ref_crc[1]); }
> > +
> >   igt_main
> >   {
> >   	data_t data;
> > @@ -167,6 +241,15 @@ igt_main
> >   		}
> >   	}
> >
> > +	igt_describe("Test for validating display clone mode with a pair of
> connected displays");
> > +	igt_subtest_with_dynamic("clone-mode-basic") {
> > +		for (i = 0; i < data.n_pipes - 1; i++) {
> > +			igt_dynamic_f("pipe-%s%s",
> kmstest_pipe_name(pipe[i]),
> > +					kmstest_pipe_name(pipe[i+1]));
> > +			run_clonemode_basic(&data, pipe[i], pipe[i+1]);
> 
> I guess, kms_setmode is already covering this (ofcourse without crc).
> Can you please check once?
> 
> - Bhanu

Yes, you are correct. 
Next plan is to move all display mode tests here.

Thanks 
Jeevan B
> 
> > +		}
> > +	}
> > +
> >   	igt_fixture {
> >   		igt_display_fini(&data.display);
> >   	}