[igt-dev] [PATCH i-g-t] tests/kms_hdr: Test cleanup
Swati Sharma
swati2.sharma at intel.com
Tue Mar 8 10:58:24 UTC 2022
Test is updated with
*Dynamic subtests
*Subtests renaming
*Removal of valid_test check
*Code indentation
*Addition of igt_display_reset()
*Restricting tests for #pipes=1 at one stage early
v2: -removal of redundant igt_display_reset() (Bhanu)
-removal of igt_info (Bhanu)
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
Reviewed-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
tests/kms_hdr.c | 431 ++++++++++++++++++++++--------------------------
1 file changed, 197 insertions(+), 234 deletions(-)
diff --git a/tests/kms_hdr.c b/tests/kms_hdr.c
index 35e25f4d..247eb658 100644
--- a/tests/kms_hdr.c
+++ b/tests/kms_hdr.c
@@ -173,106 +173,75 @@ static void prepare_test(data_t *data, igt_output_t *output, enum pipe pipe)
data->h = data->mode->vdisplay;
}
-static bool igt_pipe_is_free(igt_display_t *display, enum pipe pipe)
-{
- int i;
-
- for (i = 0; i < display->n_outputs; i++)
- if (display->outputs[i].pending_pipe == pipe)
- return false;
-
- return true;
-}
-
-static void test_bpc_switch_on_output(data_t *data, igt_output_t *output,
+static void test_bpc_switch_on_output(data_t *data, enum pipe pipe,
+ igt_output_t *output,
uint32_t flags)
{
igt_display_t *display = &data->display;
igt_crc_t ref_crc, new_crc;
- enum pipe pipe;
igt_fb_t afb;
int afb_id, ret;
- for_each_pipe(display, pipe) {
- if (!igt_pipe_connector_valid(pipe, output))
- continue;
- /*
- * If previous subtest of connector failed, pipe
- * attached to that connector is not released.
- * Because of that we have to choose the non
- * attached pipe for this subtest.
- */
- if (!igt_pipe_is_free(display, pipe))
- continue;
-
- prepare_test(data, output, pipe);
-
- /* 10-bit formats are slow, so limit the size. */
- afb_id = igt_create_fb(data->fd, 512, 512, DRM_FORMAT_XRGB2101010, 0, &afb);
- igt_assert(afb_id);
+ prepare_test(data, output, pipe);
- draw_hdr_pattern(&afb);
-
- /* Plane may be required to fit fullscreen. Check it here and allow
- * smaller plane size in following tests.
- */
- igt_plane_set_fb(data->primary, &afb);
- igt_plane_set_size(data->primary, data->w, data->h);
- ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY, NULL);
- if (!ret) {
- data->w = afb.width;
- data->h = afb.height;
- }
+ /* 10-bit formats are slow, so limit the size. */
+ afb_id = igt_create_fb(data->fd, 512, 512, DRM_FORMAT_XRGB2101010, 0, &afb);
+ igt_assert(afb_id);
- /* Start in 8bpc. */
- igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
- igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- /*
- * i915 driver doesn't expose max bpc as debugfs entry,
- * so limiting assert only for amd driver.
- */
- if (is_amdgpu_device(data->fd))
- assert_output_bpc(data, 8);
-
- /*
- * amdgpu requires a primary plane when the CRTC is enabled.
- * However, some older Intel hardware (hsw) have scaling
- * requirements that are not met by the plane, so remove it
- * for non-AMD devices.
- */
- if (!is_amdgpu_device(data->fd))
- igt_plane_set_fb(data->primary, NULL);
+ draw_hdr_pattern(&afb);
- /* Switch to 10bpc. */
- igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 10);
- igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- if (is_amdgpu_device(data->fd))
- assert_output_bpc(data, 10);
-
- /* Verify that the CRC are equal after DPMS or suspend. */
- igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
- test_cycle_flags(data, flags);
- igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
-
- /* Drop back to 8bpc. */
- igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
- igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- if (is_amdgpu_device(data->fd))
- assert_output_bpc(data, 8);
-
- /* CRC capture is clamped to 8bpc, so capture should match. */
- igt_assert_crc_equal(&ref_crc, &new_crc);
+ /* Plane may be required to fit fullscreen. Check it here and allow
+ * smaller plane size in following tests.
+ */
+ igt_plane_set_fb(data->primary, &afb);
+ igt_plane_set_size(data->primary, data->w, data->h);
+ ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY, NULL);
+ if (!ret) {
+ data->w = afb.width;
+ data->h = afb.height;
+ }
- test_fini(data);
- igt_remove_fb(data->fd, &afb);
+ /* Start in 8bpc. */
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ /*
+ * i915 driver doesn't expose max bpc as debugfs entry,
+ * so limiting assert only for amd driver.
+ */
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 8);
- /*
- * Testing a output with a pipe is enough for HDR
- * testing. No ROI in testing the connector with other
- * pipes. So break the loop on pipe.
- */
- break;
- }
+ /*
+ * amdgpu requires a primary plane when the CRTC is enabled.
+ * However, some older Intel hardware (hsw) have scaling
+ * requirements that are not met by the plane, so remove it
+ * for non-AMD devices.
+ */
+ if (!is_amdgpu_device(data->fd))
+ igt_plane_set_fb(data->primary, NULL);
+
+ /* Switch to 10bpc. */
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 10);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 10);
+
+ /* Verify that the CRC are equal after DPMS or suspend. */
+ igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
+ test_cycle_flags(data, flags);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
+
+ /* Drop back to 8bpc. */
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 8);
+
+ /* CRC capture is clamped to 8bpc, so capture should match. */
+ igt_assert_crc_equal(&ref_crc, &new_crc);
+
+ test_fini(data);
+ igt_remove_fb(data->fd, &afb);
}
/* Returns true if an output supports max bpc property. */
@@ -282,21 +251,27 @@ static bool has_max_bpc(igt_output_t *output)
igt_output_get_prop(output, IGT_CONNECTOR_MAX_BPC);
}
-static void test_bpc_switch(data_t *data, uint32_t flags)
+static void test_bpc_switch(data_t *data, const char *test_name, uint32_t flags)
{
+ igt_display_t *display = &data->display;
igt_output_t *output;
- int valid_tests = 0;
- for_each_connected_output(&data->display, output) {
+ for_each_connected_output(display, output) {
+ enum pipe pipe;
+
if (!has_max_bpc(output))
continue;
- igt_info("BPC switch test execution on %s\n", output->name);
- test_bpc_switch_on_output(data, output, flags);
- valid_tests++;
+ for_each_pipe(display, pipe) {
+ if (igt_pipe_connector_valid(pipe, output)) {
+ igt_dynamic_f("%s-%s-pipe-%s",
+ test_name, output->name, kmstest_pipe_name(pipe))
+ test_bpc_switch_on_output(data, pipe, output, flags);
+ /* One pipe is enough */
+ break;
+ }
+ }
}
-
- igt_require_f(valid_tests, "No connector found with max_bpc connector property\n");
}
static bool cta_block(const char *edid_ext)
@@ -426,68 +401,58 @@ static void fill_hdr_output_metadata_st2048(struct hdr_output_metadata *meta)
meta->hdmi_metadata_type1.max_cll = 500; /* 500 nits */
}
-static void test_static_toggle(data_t *data, igt_output_t *output,
+static void test_static_toggle(data_t *data, enum pipe pipe,
+ igt_output_t *output,
uint32_t flags)
{
igt_display_t *display = &data->display;
struct hdr_output_metadata hdr;
igt_crc_t ref_crc, new_crc;
- enum pipe pipe;
igt_fb_t afb;
int afb_id;
- for_each_pipe(display, pipe) {
- if (!igt_pipe_connector_valid(pipe, output))
- continue;
+ prepare_test(data, output, pipe);
- if (!igt_pipe_is_free(display, pipe))
- continue;
+ /* 10-bit formats are slow, so limit the size. */
+ afb_id = igt_create_fb(data->fd, 512, 512, DRM_FORMAT_XRGB2101010, 0, &afb);
+ igt_assert(afb_id);
- prepare_test(data, output, pipe);
+ draw_hdr_pattern(&afb);
- /* 10-bit formats are slow, so limit the size. */
- afb_id = igt_create_fb(data->fd, 512, 512, DRM_FORMAT_XRGB2101010, 0, &afb);
- igt_assert(afb_id);
+ fill_hdr_output_metadata_st2048(&hdr);
- draw_hdr_pattern(&afb);
+ /* Start with no metadata. */
+ igt_plane_set_fb(data->primary, &afb);
+ igt_plane_set_size(data->primary, data->w, data->h);
+ set_hdr_output_metadata(data, NULL);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 8);
- fill_hdr_output_metadata_st2048(&hdr);
+ /* Apply HDR metadata and 10bpc. We expect a modeset for entering. */
+ set_hdr_output_metadata(data, &hdr);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 10);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 10);
- /* Start with no metadata. */
- igt_plane_set_fb(data->primary, &afb);
- igt_plane_set_size(data->primary, data->w, data->h);
- set_hdr_output_metadata(data, NULL);
- igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
- igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- if (is_amdgpu_device(data->fd))
- assert_output_bpc(data, 8);
+ /* Verify that the CRC are equal after DPMS or suspend. */
+ igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
+ test_cycle_flags(data, flags);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
- /* Apply HDR metadata and 10bpc. We expect a modeset for entering. */
- set_hdr_output_metadata(data, &hdr);
- igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 10);
- igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- if (is_amdgpu_device(data->fd))
- assert_output_bpc(data, 10);
+ /* Disable HDR metadata and drop back to 8bpc. We expect a modeset for exiting. */
+ set_hdr_output_metadata(data, NULL);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 8);
- /* Verify that the CRC are equal after DPMS or suspend. */
- igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
- test_cycle_flags(data, flags);
- igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
+ igt_assert_crc_equal(&ref_crc, &new_crc);
- /* Disable HDR metadata and drop back to 8bpc. We expect a modeset for exiting. */
- set_hdr_output_metadata(data, NULL);
- igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
- igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- if (is_amdgpu_device(data->fd))
- assert_output_bpc(data, 8);
-
- igt_assert_crc_equal(&ref_crc, &new_crc);
-
- test_fini(data);
- igt_remove_fb(data->fd, &afb);
-
- break;
- }
+ test_fini(data);
+ igt_remove_fb(data->fd, &afb);
}
/* Fills some test values for HDR metadata targeting SDR. */
@@ -520,88 +485,77 @@ static void fill_hdr_output_metadata_sdr(struct hdr_output_metadata *meta)
meta->hdmi_metadata_type1.max_cll = 0;
}
-static void test_static_swap(data_t *data, igt_output_t *output)
+static void test_static_swap(data_t *data, enum pipe pipe, igt_output_t *output)
{
igt_display_t *display = &data->display;
igt_crc_t ref_crc, new_crc;
- enum pipe pipe;
igt_fb_t afb;
int afb_id;
struct hdr_output_metadata hdr;
- for_each_pipe(display, pipe) {
- if (!igt_pipe_connector_valid(pipe, output))
- continue;
-
- if (!igt_pipe_is_free(display, pipe))
- continue;
-
- prepare_test(data, output, pipe);
-
- /* 10-bit formats are slow, so limit the size. */
- afb_id = igt_create_fb(data->fd, 512, 512, DRM_FORMAT_XRGB2101010, 0, &afb);
- igt_assert(afb_id);
-
- draw_hdr_pattern(&afb);
-
- /* Start in SDR. */
- igt_plane_set_fb(data->primary, &afb);
- igt_plane_set_size(data->primary, data->w, data->h);
- igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
+ prepare_test(data, output, pipe);
+
+ /* 10-bit formats are slow, so limit the size. */
+ afb_id = igt_create_fb(data->fd, 512, 512, DRM_FORMAT_XRGB2101010, 0, &afb);
+ igt_assert(afb_id);
+
+ draw_hdr_pattern(&afb);
+
+ /* Start in SDR. */
+ igt_plane_set_fb(data->primary, &afb);
+ igt_plane_set_size(data->primary, data->w, data->h);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 8);
+
+ /* Enter HDR, a modeset is allowed here. */
+ fill_hdr_output_metadata_st2048(&hdr);
+ set_hdr_output_metadata(data, &hdr);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 10);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 10);
+
+ igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
+
+ /* Change the mastering information, no modeset allowed
+ * for amd driver, whereas a modeset is required for i915
+ * driver. */
+ hdr.hdmi_metadata_type1.max_display_mastering_luminance = 200;
+ hdr.hdmi_metadata_type1.max_fall = 200;
+ hdr.hdmi_metadata_type1.max_cll = 100;
+
+ set_hdr_output_metadata(data, &hdr);
+ if (is_amdgpu_device(data->fd))
+ igt_display_commit_atomic(display, 0, NULL);
+ else
igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- if (is_amdgpu_device(data->fd))
- assert_output_bpc(data, 8);
- /* Enter HDR, a modeset is allowed here. */
- fill_hdr_output_metadata_st2048(&hdr);
- set_hdr_output_metadata(data, &hdr);
- igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 10);
+ /* Enter SDR via metadata, no modeset allowed for
+ * amd driver, whereas a modeset is required for
+ * i915 driver. */
+ fill_hdr_output_metadata_sdr(&hdr);
+ set_hdr_output_metadata(data, &hdr);
+ if (is_amdgpu_device(data->fd))
+ igt_display_commit_atomic(display, 0, NULL);
+ else
igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- if (is_amdgpu_device(data->fd))
- assert_output_bpc(data, 10);
-
- igt_pipe_crc_collect_crc(data->pipe_crc, &ref_crc);
-
- /* Change the mastering information, no modeset allowed
- * for amd driver, whereas a modeset is required for i915
- * driver. */
- hdr.hdmi_metadata_type1.max_display_mastering_luminance = 200;
- hdr.hdmi_metadata_type1.max_fall = 200;
- hdr.hdmi_metadata_type1.max_cll = 100;
-
- set_hdr_output_metadata(data, &hdr);
- if (is_amdgpu_device(data->fd))
- igt_display_commit_atomic(display, 0, NULL);
- else
- igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
-
- /* Enter SDR via metadata, no modeset allowed for
- * amd driver, whereas a modeset is required for
- * i915 driver. */
- fill_hdr_output_metadata_sdr(&hdr);
- set_hdr_output_metadata(data, &hdr);
- if (is_amdgpu_device(data->fd))
- igt_display_commit_atomic(display, 0, NULL);
- else
- igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
-
- igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
-
- /* Exit SDR and enter 8bpc, cleanup. */
- set_hdr_output_metadata(data, NULL);
- igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
- igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- if (is_amdgpu_device(data->fd))
- assert_output_bpc(data, 8);
- /* Verify that the CRC didn't change while cycling metadata. */
- igt_assert_crc_equal(&ref_crc, &new_crc);
+ igt_pipe_crc_collect_crc(data->pipe_crc, &new_crc);
- test_fini(data);
- igt_remove_fb(data->fd, &afb);
+ /* Exit SDR and enter 8bpc, cleanup. */
+ set_hdr_output_metadata(data, NULL);
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 8);
+ igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (is_amdgpu_device(data->fd))
+ assert_output_bpc(data, 8);
- break;
- }
+ /* Verify that the CRC didn't change while cycling metadata. */
+ igt_assert_crc_equal(&ref_crc, &new_crc);
+
+ test_fini(data);
+ igt_remove_fb(data->fd, &afb);
}
/* Returns true if an output supports HDR metadata property. */
@@ -612,34 +566,36 @@ static bool has_hdr(igt_output_t *output)
static void test_hdr(data_t *data, const char *test_name, uint32_t flags)
{
+ igt_display_t *display = &data->display;
igt_output_t *output;
- int valid_tests = 0;
- for_each_connected_output(&data->display, output) {
+ for_each_connected_output(display, output) {
+ enum pipe pipe;
+
/* To test HDR, 10 bpc is required, so we need to
* set MAX_BPC property to 10bpc prior to setting
* HDR metadata property. Therefore, checking.
*/
- if (!has_max_bpc(output) || !has_hdr(output)) {
- igt_info("%s connector not found with HDR metadata/max_bpc connector property\n", output->name);
+ if (!has_max_bpc(output) || !has_hdr(output))
continue;
- }
- if (!is_panel_hdr(data, output)) {
- igt_info("Panel attached via %s connector is non-HDR\n", output->name);
+ if (!is_panel_hdr(data, output))
continue;
- }
-
- igt_info("HDR %s test execution on %s\n", test_name, output->name);
- if (flags & TEST_NONE || flags & TEST_DPMS || flags & TEST_SUSPEND)
- test_static_toggle(data, output, flags);
- if (flags & TEST_SWAP)
- test_static_swap(data, output);
- valid_tests++;
+ for_each_pipe(display, pipe) {
+ if (igt_pipe_connector_valid(pipe, output)) {
+ igt_dynamic_f("%s-%s-pipe-%s",
+ test_name, output->name, kmstest_pipe_name(pipe)) {
+ if (flags & TEST_NONE || flags & TEST_DPMS || flags & TEST_SUSPEND)
+ test_static_toggle(data, pipe, output, flags);
+ if (flags & TEST_SWAP)
+ test_static_swap(data, pipe, output);
+ }
+ /* One pipe is enough */
+ break;
+ }
+ }
}
-
- igt_require_f(valid_tests, "No connector found with HDR metadata/max_bpc connector property (or) panel is non-HDR\n");
}
igt_main
@@ -658,21 +614,28 @@ igt_main
}
igt_describe("Tests switching between different display output bpc modes");
- igt_subtest("bpc-switch") test_bpc_switch(&data, TEST_NONE);
+ igt_subtest_with_dynamic("bpc-switch")
+ test_bpc_switch(&data, "bpc-switch", TEST_NONE);
igt_describe("Tests bpc switch with dpms");
- igt_subtest("bpc-switch-dpms") test_bpc_switch(&data, TEST_DPMS);
+ igt_subtest_with_dynamic("bpc-switch-dpms")
+ test_bpc_switch(&data, "bpc-switch-dpms", TEST_DPMS);
igt_describe("Tests bpc switch with suspend");
- igt_subtest("bpc-switch-suspend") test_bpc_switch(&data, TEST_SUSPEND);
+ igt_subtest_with_dynamic("bpc-switch-suspend")
+ test_bpc_switch(&data, "bpc-switch-suspend", TEST_SUSPEND);
igt_describe("Tests entering and exiting HDR mode");
- igt_subtest("static-toggle") test_hdr(&data, "static-toggle", TEST_NONE);
+ igt_subtest_with_dynamic("static-toggle")
+ test_hdr(&data, "static-toggle", TEST_NONE);
igt_describe("Tests static toggle with dpms");
- igt_subtest("static-toggle-dpms") test_hdr(&data, "static-toggle-dpms", TEST_DPMS);
+ igt_subtest_with_dynamic("static-toggle-dpms")
+ test_hdr(&data, "static-toggle-dpms", TEST_DPMS);
igt_describe("Tests static toggle with suspend");
- igt_subtest("static-toggle-suspend") test_hdr(&data, "static-toggle-suspend", TEST_SUSPEND);
+ igt_subtest_with_dynamic("static-toggle-suspend")
+ test_hdr(&data, "static-toggle-suspend", TEST_SUSPEND);
igt_describe("Tests swapping static HDR metadata");
- igt_subtest("static-swap") test_hdr(&data, "static-swap", TEST_SWAP);
+ igt_subtest_with_dynamic("static-swap")
+ test_hdr(&data, "static-swap", TEST_SWAP);
igt_fixture {
igt_display_fini(&data.display);
--
2.25.1
More information about the igt-dev
mailing list