[igt-dev] [PATCH i-g-t] tests/i915/kms_dsc: IGT cleanup
Swati Sharma
swati2.sharma at intel.com
Thu May 12 13:49:59 UTC 2022
Remove redundant code and before starting the subtest,
clean up the states to default by igt_display_reset().
Few minor fixes in indentation. Added subtests description.
Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana at intel.com>
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
tests/i915/kms_dsc.c | 87 ++++++++++++++++++++------------------------
1 file changed, 40 insertions(+), 47 deletions(-)
diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c
index 22d2216e..0cf8c52e 100644
--- a/tests/i915/kms_dsc.c
+++ b/tests/i915/kms_dsc.c
@@ -44,13 +44,14 @@
#include <fcntl.h>
#include <termios.h>
-/* currently dsc compression is verifying on 8bpc frame only */
+IGT_TEST_DESCRIPTION("Test to validate display stream compression");
+
+/* currently dsc is verifed on 8bpc frame only */
#define XRGB8888_DRM_FORMAT_MIN_BPP 8
-enum dsc_test_type
-{
- test_basic_dsc_enable,
- test_dsc_compression_bpp
+enum dsc_test_type {
+ TEST_BASIC_DSC_ENABLE,
+ TEST_DSC_COMPRESSION_BPP
};
typedef struct {
@@ -82,7 +83,7 @@ static void force_dsc_enable(data_t *data)
igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
ret = igt_force_dsc_enable(data->drm_fd,
- data->output->config.connector);
+ data->output->config.connector);
igt_assert_f(ret > 0, "debugfs_write failed");
}
@@ -93,8 +94,8 @@ static void force_dsc_enable_bpp(data_t *data)
igt_debug("Forcing DSC BPP to %d on %s\n",
data->compression_bpp, data->conn_name);
ret = igt_force_dsc_enable_bpp(data->drm_fd,
- data->output->config.connector,
- data->compression_bpp);
+ data->output->config.connector,
+ data->compression_bpp);
igt_assert_f(ret > 0, "debugfs_write failed");
}
@@ -121,19 +122,6 @@ static void restore_force_dsc_en(void)
force_dsc_restore_fd = -1;
}
-static void test_cleanup(data_t *data)
-{
- igt_plane_t *primary;
-
- if (data->output) {
- primary = igt_output_get_plane_type(data->output,
- DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(primary, NULL);
- igt_output_set_pipe(data->output, PIPE_NONE);
- igt_display_commit(&data->display);
- }
-}
-
static void kms_dsc_exit_handler(int sig)
{
restore_force_dsc_en();
@@ -202,32 +190,28 @@ static bool check_dsc_on_connector(data_t *data, uint32_t drmConnector)
return true;
}
-/*
- * Re-probe connectors and do a modeset with DSC
- *
- */
+/* Re-probe connectors and do a modeset with DSC */
static void update_display(data_t *data, enum dsc_test_type test_type)
{
bool enabled;
igt_plane_t *primary;
- /* Disable the output first */
- igt_output_set_pipe(data->output, PIPE_NONE);
- igt_display_commit(&data->display);
+ /* Sanitize the state before starting the subtest. */
+ igt_display_reset(&data->display);
igt_debug("DSC is supported on %s\n", data->conn_name);
save_force_dsc_en(data);
force_dsc_enable(data);
- if (test_type == test_dsc_compression_bpp) {
+ if (test_type == TEST_DSC_COMPRESSION_BPP) {
igt_debug("Trying to set BPP to %d\n", data->compression_bpp);
force_dsc_enable_bpp(data);
}
igt_output_set_pipe(data->output, data->pipe);
qsort(data->output->config.connector->modes,
- data->output->config.connector->count_modes,
- sizeof(drmModeModeInfo),
- sort_drm_modes);
+ data->output->config.connector->count_modes,
+ sizeof(drmModeModeInfo),
+ sort_drm_modes);
igt_output_override_mode(data->output, &data->output->config.connector->modes[0]);
primary = igt_output_get_plane_type(data->output,
DRM_PLANE_TYPE_PRIMARY);
@@ -243,16 +227,20 @@ static void update_display(data_t *data, enum dsc_test_type test_type)
manual("RGB test pattern without corruption");
enabled = igt_is_dsc_enabled(data->drm_fd,
- data->output->config.connector);
+ data->output->config.connector);
restore_force_dsc_en();
igt_debug("Reset compression BPP\n");
data->compression_bpp = 0;
force_dsc_enable_bpp(data);
igt_assert_f(enabled,
- "Default DSC enable failed on Connector: %s Pipe: %s\n",
+ "Default DSC enable failed on connector: %s pipe: %s\n",
data->conn_name,
kmstest_pipe_name(data->pipe));
+
+ igt_plane_set_fb(primary, NULL);
+ igt_output_set_pipe(data->output, PIPE_NONE);
+ igt_display_commit(&data->display);
}
static void run_test(data_t *data, enum dsc_test_type test_type)
@@ -260,7 +248,7 @@ static void run_test(data_t *data, enum dsc_test_type test_type)
enum pipe pipe;
char test_name[10];
- igt_skip_on_f(test_type == test_dsc_compression_bpp &&
+ igt_skip_on_f(test_type == TEST_DSC_COMPRESSION_BPP &&
data->output->config.connector->modes[0].hdisplay >= 5120,
"bigjoiner does not support force bpp\n");
@@ -276,7 +264,7 @@ static void run_test(data_t *data, enum dsc_test_type test_type)
if (data->output->config.connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
pipe == PIPE_A && IS_GEN11(devid)) {
- igt_debug("DSC not supported on Pipe A on external DP in Gen11 platforms\n");
+ igt_debug("DSC not supported on pipe A on external DP in gen11 platforms\n");
continue;
}
@@ -284,9 +272,9 @@ static void run_test(data_t *data, enum dsc_test_type test_type)
if (!igt_pipe_connector_valid(pipe, data->output))
continue;
- igt_dynamic_f("%s-pipe-%s%s", data->output->name,
+ igt_dynamic_f("pipe-%s-%s-%s%s", kmstest_pipe_name(pipe), data->output->name,
kmstest_pipe_name(pipe),
- (test_type == test_dsc_compression_bpp) ?
+ (test_type == TEST_DSC_COMPRESSION_BPP) ?
test_name : "") {
data->pipe = pipe;
igt_skip_on_f((data->output->config.connector->modes[0].hdisplay >= 5120) &&
@@ -294,9 +282,9 @@ static void run_test(data_t *data, enum dsc_test_type test_type)
"pipe-%s not supported due to bigjoiner limitation\n",
kmstest_pipe_name(pipe));
update_display(data, test_type);
-
}
- if (test_type == test_dsc_compression_bpp)
+
+ if (test_type == TEST_DSC_COMPRESSION_BPP)
break;
}
@@ -307,8 +295,8 @@ igt_main
{
data_t data = {};
drmModeRes *res;
- drmModeConnector *connector = NULL;
int i, j;
+
igt_fixture {
data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
data.devid = intel_get_drm_devid(data.drm_fd);
@@ -320,19 +308,27 @@ igt_main
for_each_pipe(&data.display, i)
data.n_pipes++;
}
+
+ igt_describe("Tests basic display stream compression functionality if supported "
+ "by a connector by forcing DSC on all connectors that support it "
+ "with default parameters");
igt_subtest_with_dynamic("basic-dsc-enable") {
for (j = 0; j < res->count_connectors; j++) {
if (!check_dsc_on_connector(&data, res->connectors[j]))
continue;
- run_test(&data, test_basic_dsc_enable);
+ run_test(&data, TEST_BASIC_DSC_ENABLE);
}
}
+
/* currently we are validating compression bpp on XRGB8888 format only */
+ igt_describe("Tests basic display stream compression functionality if supported "
+ "by a connector by forcing DSC on all connectors that support it "
+ "with certain BPP as the output BPP for the connector");
igt_subtest_with_dynamic("XRGB8888-dsc-compression") {
uint32_t bpp_list[] = {
XRGB8888_DRM_FORMAT_MIN_BPP,
(XRGB8888_DRM_FORMAT_MIN_BPP +
- (XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1) / 2,
+ (XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1) / 2,
(XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1
};
@@ -344,15 +340,12 @@ igt_main
for (i = 0; i < ARRAY_SIZE(bpp_list); i++) {
data.compression_bpp = bpp_list[i];
- run_test(&data, test_dsc_compression_bpp);
+ run_test(&data, TEST_DSC_COMPRESSION_BPP);
}
}
}
igt_fixture {
- if (connector)
- drmModeFreeConnector(connector);
- test_cleanup(&data);
drmModeFreeResources(res);
igt_display_fini(&data.display);
close(data.drm_fd);
--
2.25.1
More information about the igt-dev
mailing list