[igt-dev] [V4 06/11] tests/kms_cursor_crc: Convert tests to dynamic
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Mon May 16 14:01:56 UTC 2022
Convert the existing subtests to dynamic subtests at pipe level.
V2:
* Fix nested igt_fixture in igt_subtest.
V3:
* Add output name to subtest
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
tests/kms_cursor_crc.c | 207 +++++++++++++++++++++++++----------------
1 file changed, 129 insertions(+), 78 deletions(-)
diff --git a/tests/kms_cursor_crc.c b/tests/kms_cursor_crc.c
index 513c9715..e489a870 100644
--- a/tests/kms_cursor_crc.c
+++ b/tests/kms_cursor_crc.c
@@ -688,125 +688,177 @@ static void test_rapid_movement(data_t *data)
igt_assert_lt(usec, 0.9 * 400 * 1000000 / data->refresh);
}
-static void run_size_tests(data_t *data, enum pipe pipe,
+static void run_size_tests(data_t *data, void (*testfunc)(data_t *),
int w, int h)
{
char name[16];
+ enum pipe pipe;
if (w == 0 && h == 0)
strcpy(name, "max-size");
else
snprintf(name, sizeof(name), "%dx%d", w, h);
- igt_fixture {
- if (w == 0 && h == 0) {
- w = data->cursor_max_w;
- h = data->cursor_max_h;
- /*
- * No point in doing the "max-size" test if
- * it was already covered by the other tests.
- */
- igt_require_f(w != h || w > 512 || h > 512 ||
- !is_power_of_two(w) || !is_power_of_two(h),
- "Cursor max size %dx%d already covered by other tests\n",
- w, h);
- }
- create_cursor_fb(data, w, h);
+ if (w == 0 && h == 0) {
+ w = data->cursor_max_w;
+ h = data->cursor_max_h;
+ /*
+ * No point in doing the "max-size" test if
+ * it was already covered by the other tests.
+ */
+ igt_require_f(w != h || w > 512 || h > 512 ||
+ !is_power_of_two(w) || !is_power_of_two(h),
+ "Cursor max size %dx%d already covered by other tests\n",
+ w, h);
}
+ create_cursor_fb(data, w, h);
- /* Using created cursor FBs to test cursor support */
- igt_describe("Check if a given-size cursor is well-positioned inside the screen.");
- igt_subtest_f("pipe-%s-cursor-%s-onscreen", kmstest_pipe_name(pipe), name)
- run_test(data, test_crc_onscreen, w, h);
-
- igt_describe("Check if a given-size cursor is well-positioned outside the "
- "screen.");
- igt_subtest_f("pipe-%s-cursor-%s-offscreen", kmstest_pipe_name(pipe), name)
- run_test(data, test_crc_offscreen, w, h);
-
- igt_describe("Check the smooth and pixel-by-pixel given-size cursor "
- "movements on horizontal, vertical and diagonal.");
- igt_subtest_f("pipe-%s-cursor-%s-sliding", kmstest_pipe_name(pipe), name)
- run_test(data, test_crc_sliding, w, h);
-
- igt_describe("Check random placement of a cursor with given size.");
- igt_subtest_f("pipe-%s-cursor-%s-random", kmstest_pipe_name(pipe), name)
- run_test(data, test_crc_random, w, h);
-
- igt_describe("Check the rapid update of given-size cursor movements.");
- igt_subtest_f("pipe-%s-cursor-%s-rapid-movement", kmstest_pipe_name(pipe), name)
- run_test(data, test_rapid_movement, w, h);
+ for_each_pipe(&data->display, pipe) {
+ data->pipe = pipe;
+ igt_dynamic_f("pipe-%s-%s-%s",
+ kmstest_pipe_name(pipe), data->output->name, name)
+ run_test(data, testfunc, w, h);
+ }
- igt_fixture
- igt_remove_fb(data->drm_fd, &data->fb);
+ igt_remove_fb(data->drm_fd, &data->fb);
}
-static void run_tests_on_pipe(data_t *data, enum pipe pipe)
+static void run_tests_on_pipe(data_t *data)
{
+ enum pipe pipe;
int cursor_size;
+ int i;
+ struct {
+ const char *name;
+ void (*testfunc)(data_t *);
+ const char *desc;
+ } size_tests[] = {
+ { "cursor-onscreen", test_crc_onscreen,
+ "Check if a given-size cursor is well-positioned inside the screen." },
+ { "cursor-offscreen", test_crc_offscreen,
+ "Check if a given-size cursor is well-positioned outside the screen." },
+ { "cursor-sliding", test_crc_sliding,
+ "Check the smooth and pixel-by-pixel given-size cursor movements on horizontal, vertical and diagonal." },
+ { "cursor-random", test_crc_random,
+ "Check random placement of a cursor with given size." },
+ { "cursor-rapid-movement", test_rapid_movement,
+ "Check the rapid update of given-size cursor movements." },
+ };
igt_fixture {
- data->pipe = pipe;
data->output = igt_get_single_output_for_pipe(&data->display, pipe);
igt_require(data->output);
data->alpha = 1.0;
+ data->flags = 0;
}
igt_describe("Create a maximum size cursor, then change the size in "
"flight to smaller ones to see that the size is applied "
"correctly.");
- igt_subtest_f("pipe-%s-cursor-size-change", kmstest_pipe_name(pipe))
- run_test(data, test_cursor_size,
- data->cursor_max_w, data->cursor_max_h);
+ igt_subtest_with_dynamic("cursor-size-change") {
+ for_each_pipe(&data->display, pipe) {
+ data->pipe = pipe;
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(pipe),
+ data->output->name)
+ run_test(data, test_cursor_size,
+ data->cursor_max_w, data->cursor_max_h);
+ }
+ }
igt_describe("Validates the composition of a fully opaque cursor "
"plane, i.e., alpha channel equal to 1.0.");
- igt_subtest_f("pipe-%s-cursor-alpha-opaque", kmstest_pipe_name(pipe))
- run_test(data, test_cursor_opaque, data->cursor_max_w, data->cursor_max_h);
+ igt_subtest_with_dynamic("cursor-alpha-opaque") {
+ for_each_pipe(&data->display, pipe) {
+ data->pipe = pipe;
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(pipe),
+ data->output->name)
+ run_test(data, test_cursor_opaque,
+ data->cursor_max_w, data->cursor_max_h);
+ }
+ }
igt_describe("Validates the composition of a fully transparent cursor "
"plane, i.e., alpha channel equal to 0.0.");
- igt_subtest_f("pipe-%s-cursor-alpha-transparent", kmstest_pipe_name(pipe))
- run_test(data, test_cursor_transparent, data->cursor_max_w, data->cursor_max_h);
+ igt_subtest_with_dynamic("cursor-alpha-transparent") {
+ for_each_pipe(&data->display, pipe) {
+ data->pipe = pipe;
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(pipe),
+ data->output->name)
+ run_test(data, test_cursor_transparent,
+ data->cursor_max_w, data->cursor_max_h);
+ }
+ }
igt_fixture {
create_cursor_fb(data, data->cursor_max_w, data->cursor_max_h);
}
- igt_subtest_f("pipe-%s-cursor-dpms", kmstest_pipe_name(pipe)) {
- data->flags = TEST_DPMS;
- run_test(data, test_crc_random, data->cursor_max_w, data->cursor_max_h);
+ igt_describe("Check random placement of a cursor with DPMS.");
+ igt_subtest_with_dynamic("cursor-dpms") {
+ for_each_pipe(&data->display, pipe) {
+ data->pipe = pipe;
+ data->flags = TEST_DPMS;
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(pipe),
+ data->output->name)
+ run_test(data, test_crc_random,
+ data->cursor_max_w, data->cursor_max_h);
+ }
+ data->flags = 0;
}
- data->flags = 0;
- igt_subtest_f("pipe-%s-cursor-suspend", kmstest_pipe_name(pipe)) {
- data->flags = TEST_SUSPEND;
- run_test(data, test_crc_random, data->cursor_max_w, data->cursor_max_h);
+ igt_describe("Check random placement of a cursor with suspend.");
+ igt_subtest_with_dynamic("cursor-suspend") {
+ for_each_pipe(&data->display, pipe) {
+ data->pipe = pipe;
+ data->flags = TEST_SUSPEND;
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(pipe),
+ data->output->name)
+ run_test(data, test_crc_random,
+ data->cursor_max_w, data->cursor_max_h);
+ }
+ data->flags = 0;
}
- data->flags = 0;
igt_fixture
igt_remove_fb(data->drm_fd, &data->fb);
- for (cursor_size = 32; cursor_size <= 512; cursor_size *= 2) {
- int w = cursor_size;
- int h = cursor_size;
-
- igt_subtest_group
- run_size_tests(data, pipe, w, h);
-
- /*
- * Test non-square cursors a bit on the platforms
- * that support such things. And make it a bit more
- * interesting by using a non-pot height.
- */
- h /= 3;
-
- igt_subtest_group
- run_size_tests(data, pipe, w, h);
+ for (i = 0; i < ARRAY_SIZE(size_tests); i++) {
+ igt_describe(size_tests[i].desc);
+ igt_subtest_group {
+ igt_subtest_with_dynamic_f("%s", size_tests[i].name) {
+ for (cursor_size = 32; cursor_size <= 512; cursor_size *= 2) {
+ int w = cursor_size;
+ int h = cursor_size;
+
+ igt_subtest_group
+ run_size_tests(data, size_tests[i].testfunc, w, h);
+
+ /*
+ * Test non-square cursors a bit on the platforms
+ * that support such things. And make it a bit more
+ * interesting by using a non-pot height.
+ */
+ h /= 3;
+
+ igt_subtest_group
+ run_size_tests(data, size_tests[i].testfunc, w, h);
+ }
+
+ igt_subtest_group
+ run_size_tests(data, size_tests[i].testfunc, 0, 0);
+ }
+ }
}
-
- run_size_tests(data, pipe, 0, 0);
}
static data_t data;
@@ -815,7 +867,6 @@ igt_main
{
uint64_t cursor_width = 64, cursor_height = 64;
int ret;
- enum pipe pipe;
igt_fixture {
data.drm_fd = drm_open_driver_master(DRIVER_ANY);
@@ -831,6 +882,7 @@ igt_main
igt_require_pipe_crc(data.drm_fd);
igt_display_require(&data.display, data.drm_fd);
+ igt_display_require_output(&data.display);
igt_display_reset(&data.display);
igt_display_commit2(&data.display, data.display.is_atomic ?
COMMIT_ATOMIC : COMMIT_LEGACY);
@@ -839,9 +891,8 @@ igt_main
data.cursor_max_w = cursor_width;
data.cursor_max_h = cursor_height;
- for_each_pipe_static(pipe)
- igt_subtest_group
- run_tests_on_pipe(&data, pipe);
+ igt_subtest_group
+ run_tests_on_pipe(&data);
igt_fixture {
if (data.pipe_crc != NULL) {
--
2.35.1
More information about the igt-dev
mailing list