[igt-dev] [PATCH i-g-t v3] tests/i915/kms_dsc: IGT cleanup

Swati Sharma swati2.sharma at intel.com
Tue May 17 11:16:39 UTC 2022


Remove redundant code and before starting the subtest,
clean up the states to default by igt_display_reset().
Few minor fixes in indentation. Added subtests description.

v2: -minor mistake in subtest name
    -commit was missing after reset, added
v3: -fixed styling error
    -replaced drm calls with igt wrappers

Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana at intel.com>
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
 lib/igt_kms.c        |   1 -
 tests/i915/kms_dsc.c | 153 ++++++++++++++++++++-----------------------
 2 files changed, 72 insertions(+), 82 deletions(-)

diff --git a/lib/igt_kms.c b/lib/igt_kms.c
index 7838ff28..50a965ad 100644
--- a/lib/igt_kms.c
+++ b/lib/igt_kms.c
@@ -5304,7 +5304,6 @@ bool igt_is_dsc_supported(int drmfd, drmModeConnector *connector)
  */
 bool igt_is_fec_supported(int drmfd, drmModeConnector *connector)
 {
-
 	return check_dsc_debugfs(drmfd, connector, "FEC_Sink_Support: yes");
 }
 
diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c
index 22d2216e..31f28dcf 100644
--- a/tests/i915/kms_dsc.c
+++ b/tests/i915/kms_dsc.c
@@ -44,13 +44,16 @@
 #include <fcntl.h>
 #include <termios.h>
 
-/* currently dsc compression is verifying on 8bpc frame only */
+IGT_TEST_DESCRIPTION("Test to validate display stream compression");
+
+#define HDISPLAY_5K	5120
+
+/* currently dsc is verifed on 8bpc frame only */
 #define XRGB8888_DRM_FORMAT_MIN_BPP 8
 
-enum dsc_test_type
-{
-	test_basic_dsc_enable,
-	test_dsc_compression_bpp
+enum dsc_test_type {
+	TEST_BASIC_DSC_ENABLE,
+	TEST_DSC_COMPRESSION_BPP
 };
 
 typedef struct {
@@ -60,8 +63,6 @@ typedef struct {
 	struct igt_fb fb_test_pattern;
 	igt_output_t *output;
 	int mode_valid;
-	drmModeEncoder *encoder;
-	int crtc;
 	int compression_bpp;
 	int n_pipes;
 	enum pipe pipe;
@@ -82,7 +83,7 @@ static void force_dsc_enable(data_t *data)
 
 	igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
 	ret = igt_force_dsc_enable(data->drm_fd,
-				      data->output->config.connector);
+				   data->output->config.connector);
 	igt_assert_f(ret > 0, "debugfs_write failed");
 }
 
@@ -93,8 +94,8 @@ static void force_dsc_enable_bpp(data_t *data)
 	igt_debug("Forcing DSC BPP to %d on %s\n",
 		  data->compression_bpp, data->conn_name);
 	ret = igt_force_dsc_enable_bpp(data->drm_fd,
-					  data->output->config.connector,
-					  data->compression_bpp);
+				       data->output->config.connector,
+				       data->compression_bpp);
 	igt_assert_f(ret > 0, "debugfs_write failed");
 }
 
@@ -121,19 +122,6 @@ static void restore_force_dsc_en(void)
 	force_dsc_restore_fd = -1;
 }
 
-static void test_cleanup(data_t *data)
-{
-	igt_plane_t *primary;
-
-	if (data->output) {
-		primary = igt_output_get_plane_type(data->output,
-						    DRM_PLANE_TYPE_PRIMARY);
-		igt_plane_set_fb(primary, NULL);
-		igt_output_set_pipe(data->output, PIPE_NONE);
-		igt_display_commit(&data->display);
-	}
-}
-
 static void kms_dsc_exit_handler(int sig)
 {
 	restore_force_dsc_en();
@@ -159,28 +147,24 @@ static int sort_drm_modes(const void *a, const void *b)
 	return (mode1->clock < mode2->clock) - (mode2->clock < mode1->clock);
 }
 
-static bool check_dsc_on_connector(data_t *data, uint32_t drmConnector)
+static bool check_dsc_on_connector(data_t *data, igt_output_t *output)
 {
-	drmModeConnector *connector;
-	igt_output_t *output;
+	drmModeConnector *connector = output->config.connector;
 
-	connector = drmModeGetConnectorCurrent(data->drm_fd,
-					       drmConnector);
 	if (connector->connection != DRM_MODE_CONNECTED)
 		return false;
 
-	output = igt_output_from_connector(&data->display, connector);
-
 	/*
-	 * As dsc supports >= 5k modes, we need to suppress lower
+	 * dsc supports >= 5k modes, we need to suppress lower
 	 * resolutions.
 	 */
-	qsort(output->config.connector->modes,
-	      output->config.connector->count_modes,
+	qsort(connector->modes,
+	      connector->count_modes,
 	      sizeof(drmModeModeInfo),
 	      sort_drm_modes);
-	if (output->config.connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
-	    output->config.connector->modes[0].hdisplay < 5120)
+
+	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
+	    connector->modes[0].hdisplay < HDISPLAY_5K)
 		return NULL;
 
 	sprintf(data->conn_name, "%s-%d",
@@ -192,81 +176,86 @@ static bool check_dsc_on_connector(data_t *data, uint32_t drmConnector)
 			  data->conn_name);
 		return false;
 	}
+
 	if (is_external_panel(connector) &&
 	    !igt_is_fec_supported(data->drm_fd, connector)) {
 		igt_debug("DSC cannot be enabled without FEC on %s\n",
 			  data->conn_name);
 		return false;
 	}
+
 	data->output = output;
 	return true;
 }
 
-/*
- * Re-probe connectors and do a modeset with DSC
- *
- */
+/* re-probe connectors and do a modeset with DSC */
 static void update_display(data_t *data, enum dsc_test_type test_type)
 {
 	bool enabled;
 	igt_plane_t *primary;
+	drmModeConnector *connector = data->output->config.connector;
 
-	/* Disable the output first */
-	igt_output_set_pipe(data->output, PIPE_NONE);
+	/* sanitize the state before starting the subtest. */
+	igt_display_reset(&data->display);
 	igt_display_commit(&data->display);
 
 	igt_debug("DSC is supported on %s\n", data->conn_name);
 	save_force_dsc_en(data);
 	force_dsc_enable(data);
-	if (test_type == test_dsc_compression_bpp) {
+
+	if (test_type == TEST_DSC_COMPRESSION_BPP) {
 		igt_debug("Trying to set BPP to %d\n", data->compression_bpp);
 		force_dsc_enable_bpp(data);
 	}
 
 	igt_output_set_pipe(data->output, data->pipe);
-	qsort(data->output->config.connector->modes,
-			data->output->config.connector->count_modes,
-			sizeof(drmModeModeInfo),
-			sort_drm_modes);
-	igt_output_override_mode(data->output, &data->output->config.connector->modes[0]);
+	qsort(connector->modes,
+	      connector->count_modes,
+	      sizeof(drmModeModeInfo),
+	      sort_drm_modes);
+
+	igt_output_override_mode(data->output, &connector->modes[0]);
 	primary = igt_output_get_plane_type(data->output,
 					    DRM_PLANE_TYPE_PRIMARY);
 
-	/* Now set the output to the desired mode */
+	/* now set the output to the desired mode */
 	igt_plane_set_fb(primary, &data->fb_test_pattern);
 	igt_display_commit(&data->display);
 
 	/*
-	 * Until we have CRC check support, manually check if RGB test
+	 * until we have CRC check support, manually check if RGB test
 	 * pattern has no corruption.
 	 */
 	manual("RGB test pattern without corruption");
 
-	enabled = igt_is_dsc_enabled(data->drm_fd,
-					data->output->config.connector);
+	enabled = igt_is_dsc_enabled(data->drm_fd, connector);
 	restore_force_dsc_en();
 	igt_debug("Reset compression BPP\n");
 	data->compression_bpp = 0;
 	force_dsc_enable_bpp(data);
 
 	igt_assert_f(enabled,
-		     "Default DSC enable failed on Connector: %s Pipe: %s\n",
+		     "Default DSC enable failed on connector: %s pipe: %s\n",
 		     data->conn_name,
 		     kmstest_pipe_name(data->pipe));
+
+	igt_plane_set_fb(primary, NULL);
+	igt_output_set_pipe(data->output, PIPE_NONE);
 }
 
 static void run_test(data_t *data, enum dsc_test_type test_type)
 {
 	enum pipe pipe;
 	char test_name[10];
+	drmModeConnector *connector = data->output->config.connector;
 
-	igt_skip_on_f(test_type == test_dsc_compression_bpp &&
-		      data->output->config.connector->modes[0].hdisplay >= 5120,
+	igt_skip_on_f(test_type == TEST_DSC_COMPRESSION_BPP &&
+		      connector->modes[0].hdisplay >= HDISPLAY_5K,
 		      "bigjoiner does not support force bpp\n");
 
 	igt_create_pattern_fb(data->drm_fd,
-			      data->output->config.connector->modes[0].hdisplay,
-			      data->output->config.connector->modes[0].vdisplay,
+			      connector->modes[0].hdisplay,
+			      connector->modes[0].vdisplay,
 			      DRM_FORMAT_XRGB8888,
 			      DRM_FORMAT_MOD_LINEAR,
 			      &data->fb_test_pattern);
@@ -274,9 +263,9 @@ static void run_test(data_t *data, enum dsc_test_type test_type)
 	for_each_pipe(&data->display, pipe) {
 		uint32_t devid = intel_get_drm_devid(data->drm_fd);
 
-		if (data->output->config.connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
+		if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
 		    pipe == PIPE_A && IS_GEN11(devid)) {
-			igt_debug("DSC not supported on Pipe A on external DP in Gen11 platforms\n");
+			igt_debug("DSC not supported on pipe A on external DP in gen11 platforms\n");
 			continue;
 		}
 
@@ -284,19 +273,18 @@ static void run_test(data_t *data, enum dsc_test_type test_type)
 		if (!igt_pipe_connector_valid(pipe, data->output))
 			continue;
 
-		igt_dynamic_f("%s-pipe-%s%s", data->output->name,
-			      kmstest_pipe_name(pipe),
-			      (test_type == test_dsc_compression_bpp) ?
+		igt_dynamic_f("pipe-%s-%s%s",  kmstest_pipe_name(pipe), data->output->name,
+			     (test_type == TEST_DSC_COMPRESSION_BPP) ?
 			      test_name : "") {
 			data->pipe = pipe;
-			igt_skip_on_f((data->output->config.connector->modes[0].hdisplay >= 5120) &&
+			igt_skip_on_f((connector->modes[0].hdisplay >= HDISPLAY_5K) &&
 				      (pipe  == (data->n_pipes - 1)),
 				      "pipe-%s not supported due to bigjoiner limitation\n",
 				      kmstest_pipe_name(pipe));
 			update_display(data, test_type);
-
 		}
-		if (test_type == test_dsc_compression_bpp)
+
+		if (test_type == TEST_DSC_COMPRESSION_BPP)
 			break;
 	}
 
@@ -306,54 +294,57 @@ static void run_test(data_t *data, enum dsc_test_type test_type)
 igt_main
 {
 	data_t data = {};
-	drmModeRes *res;
-	drmModeConnector *connector = NULL;
-	int i, j;
+	igt_output_t *output;
+	int i;
+
 	igt_fixture {
 		data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
 		data.devid = intel_get_drm_devid(data.drm_fd);
 		kmstest_set_vt_graphics_mode();
 		igt_install_exit_handler(kms_dsc_exit_handler);
 		igt_display_require(&data.display, data.drm_fd);
-		igt_require(res = drmModeGetResources(data.drm_fd));
 		data.n_pipes = 0;
 		for_each_pipe(&data.display, i)
 			data.n_pipes++;
 	}
+
+	igt_describe("Tests basic display stream compression functionality if supported "
+		     "by a connector by forcing DSC on all connectors that support it "
+		     "with default parameters");
 	igt_subtest_with_dynamic("basic-dsc-enable") {
-		for (j = 0; j < res->count_connectors; j++) {
-			if (!check_dsc_on_connector(&data, res->connectors[j]))
+		for_each_connected_output(&data.display, output) {
+			if (!check_dsc_on_connector(&data, output))
 				continue;
-			run_test(&data, test_basic_dsc_enable);
+			run_test(&data, TEST_BASIC_DSC_ENABLE);
 		}
 	}
+
 	/* currently we are validating compression bpp on XRGB8888 format only */
+	igt_describe("Tests basic display stream compression functionality if supported "
+		     "by a connector by forcing DSC on all connectors that support it "
+		     "with certain BPP as the output BPP for the connector");
 	igt_subtest_with_dynamic("XRGB8888-dsc-compression") {
 		uint32_t bpp_list[] = {
 			XRGB8888_DRM_FORMAT_MIN_BPP,
 			(XRGB8888_DRM_FORMAT_MIN_BPP  +
-			 (XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1) / 2,
+			(XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1) / 2,
 			(XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1
 		};
 
 		igt_require(intel_display_ver(data.devid) >= 13);
 
-		for (j = 0; j < res->count_connectors; j++) {
-			if (!check_dsc_on_connector(&data, res->connectors[j]))
+		for_each_connected_output(&data.display, output) {
+			if (!check_dsc_on_connector(&data, output))
 				continue;
 
-			for (i = 0; i < ARRAY_SIZE(bpp_list); i++) {
-				data.compression_bpp = bpp_list[i];
-				run_test(&data, test_dsc_compression_bpp);
+			for (int j = 0; j < ARRAY_SIZE(bpp_list); j++) {
+				data.compression_bpp = bpp_list[j];
+				run_test(&data, TEST_DSC_COMPRESSION_BPP);
 			}
 		}
 	}
 
 	igt_fixture {
-		if (connector)
-			drmModeFreeConnector(connector);
-		test_cleanup(&data);
-		drmModeFreeResources(res);
 		igt_display_fini(&data.display);
 		close(data.drm_fd);
 	}
-- 
2.25.1



More information about the igt-dev mailing list