[igt-dev] [PATCH i-g-t v4] tests/i915/kms_dsc: IGT cleanup
Swati Sharma
swati2.sharma at intel.com
Thu May 19 05:32:10 UTC 2022
Remove redundant code and before starting the subtest,
clean up the states to default by igt_display_reset().
Few minor fixes in indentation. Added subtests description.
v2: -minor mistake in subtest name
-commit was missing after reset, added
v3: -fixed styling error
-replaced drm calls with igt wrappers
v4: -added igt_display_require_output() in igt_fixture
-modularized code, added func() for checks
-added func() to get highest mode
Signed-off-by: Patnana Venkata Sai <venkata.sai.patnana at intel.com>
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
lib/igt_kms.c | 1 -
tests/i915/kms_dsc.c | 263 +++++++++++++++++++++++--------------------
2 files changed, 139 insertions(+), 125 deletions(-)
diff --git a/lib/igt_kms.c b/lib/igt_kms.c
index 7838ff28..50a965ad 100644
--- a/lib/igt_kms.c
+++ b/lib/igt_kms.c
@@ -5304,7 +5304,6 @@ bool igt_is_dsc_supported(int drmfd, drmModeConnector *connector)
*/
bool igt_is_fec_supported(int drmfd, drmModeConnector *connector)
{
-
return check_dsc_debugfs(drmfd, connector, "FEC_Sink_Support: yes");
}
diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c
index 22d2216e..3adca600 100644
--- a/tests/i915/kms_dsc.c
+++ b/tests/i915/kms_dsc.c
@@ -44,13 +44,16 @@
#include <fcntl.h>
#include <termios.h>
-/* currently dsc compression is verifying on 8bpc frame only */
+IGT_TEST_DESCRIPTION("Test to validate display stream compression");
+
+#define HDISPLAY_5K 5120
+
+/* currently dsc is verifed on 8bpc frame only */
#define XRGB8888_DRM_FORMAT_MIN_BPP 8
-enum dsc_test_type
-{
- test_basic_dsc_enable,
- test_dsc_compression_bpp
+enum dsc_test_type {
+ TEST_BASIC_DSC_ENABLE,
+ TEST_DSC_COMPRESSION_BPP
};
typedef struct {
@@ -59,9 +62,6 @@ typedef struct {
igt_display_t display;
struct igt_fb fb_test_pattern;
igt_output_t *output;
- int mode_valid;
- drmModeEncoder *encoder;
- int crtc;
int compression_bpp;
int n_pipes;
enum pipe pipe;
@@ -80,9 +80,9 @@ static void force_dsc_enable(data_t *data)
{
int ret;
- igt_debug ("Forcing DSC enable on %s\n", data->conn_name);
+ igt_debug("Forcing DSC enable on %s\n", data->conn_name);
ret = igt_force_dsc_enable(data->drm_fd,
- data->output->config.connector);
+ data->output->config.connector);
igt_assert_f(ret > 0, "debugfs_write failed");
}
@@ -93,8 +93,8 @@ static void force_dsc_enable_bpp(data_t *data)
igt_debug("Forcing DSC BPP to %d on %s\n",
data->compression_bpp, data->conn_name);
ret = igt_force_dsc_enable_bpp(data->drm_fd,
- data->output->config.connector,
- data->compression_bpp);
+ data->output->config.connector,
+ data->compression_bpp);
igt_assert_f(ret > 0, "debugfs_write failed");
}
@@ -105,7 +105,7 @@ static void save_force_dsc_en(data_t *data)
data->output->config.connector);
force_dsc_restore_fd =
igt_get_dsc_debugfs_fd(data->drm_fd,
- data->output->config.connector);
+ data->output->config.connector);
igt_assert(force_dsc_restore_fd >= 0);
}
@@ -121,19 +121,6 @@ static void restore_force_dsc_en(void)
force_dsc_restore_fd = -1;
}
-static void test_cleanup(data_t *data)
-{
- igt_plane_t *primary;
-
- if (data->output) {
- primary = igt_output_get_plane_type(data->output,
- DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(primary, NULL);
- igt_output_set_pipe(data->output, PIPE_NONE);
- igt_display_commit(&data->display);
- }
-}
-
static void kms_dsc_exit_handler(int sig)
{
restore_force_dsc_en();
@@ -159,29 +146,26 @@ static int sort_drm_modes(const void *a, const void *b)
return (mode1->clock < mode2->clock) - (mode2->clock < mode1->clock);
}
-static bool check_dsc_on_connector(data_t *data, uint32_t drmConnector)
+static drmModeModeInfo *get_highres_mode(drmModeConnector *connector)
{
- drmModeConnector *connector;
- igt_output_t *output;
-
- connector = drmModeGetConnectorCurrent(data->drm_fd,
- drmConnector);
- if (connector->connection != DRM_MODE_CONNECTED)
- return false;
-
- output = igt_output_from_connector(&data->display, connector);
+ drmModeModeInfo *highest_mode = NULL;
- /*
- * As dsc supports >= 5k modes, we need to suppress lower
- * resolutions.
- */
- qsort(output->config.connector->modes,
- output->config.connector->count_modes,
+ qsort(connector->modes,
+ connector->count_modes,
sizeof(drmModeModeInfo),
sort_drm_modes);
- if (output->config.connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
- output->config.connector->modes[0].hdisplay < 5120)
- return NULL;
+
+ highest_mode = &connector->modes[0];
+
+ return highest_mode;
+}
+
+static bool check_dsc_on_connector(data_t *data, igt_output_t *output)
+{
+ drmModeConnector *connector = output->config.connector;
+
+ if (connector->connection != DRM_MODE_CONNECTED)
+ return false;
sprintf(data->conn_name, "%s-%d",
kmstest_connector_type_str(connector->connector_type),
@@ -192,168 +176,199 @@ static bool check_dsc_on_connector(data_t *data, uint32_t drmConnector)
data->conn_name);
return false;
}
+
if (is_external_panel(connector) &&
!igt_is_fec_supported(data->drm_fd, connector)) {
igt_debug("DSC cannot be enabled without FEC on %s\n",
data->conn_name);
return false;
}
+
data->output = output;
return true;
}
-/*
- * Re-probe connectors and do a modeset with DSC
- *
- */
-static void update_display(data_t *data, enum dsc_test_type test_type)
+static bool check_big_joiner_test_constraint(data_t *data, igt_output_t *output,
+ enum dsc_test_type test_type)
+{
+ drmModeConnector *connector = output->config.connector;
+ drmModeModeInfo *mode = get_highres_mode(connector);
+
+ if (test_type == TEST_DSC_COMPRESSION_BPP &&
+ mode->hdisplay >= HDISPLAY_5K) {
+ igt_debug("Bigjoiner does not support force bpp\n");
+ return false;
+ }
+
+ return true;
+}
+
+static bool check_big_joiner_pipe_constraint(data_t *data, igt_output_t *output,
+ enum pipe pipe)
+{
+ drmModeConnector *connector = output->config.connector;
+ drmModeModeInfo *mode = get_highres_mode(connector);
+
+ if (mode->hdisplay >= HDISPLAY_5K &&
+ pipe == (data->n_pipes - 1 )) {
+ igt_debug("pipe-%s not supported due to bigjoiner limitation\n",
+ kmstest_pipe_name(pipe));
+ return false;
+ }
+
+ return true;
+}
+
+static bool check_dp_gen11_constraint(data_t *data, igt_output_t *output, enum pipe pipe)
+{
+ uint32_t devid = intel_get_drm_devid(data->drm_fd);
+ drmModeConnector *connector = output->config.connector;
+
+ if ((connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) &&
+ (pipe == PIPE_A) && IS_GEN11(devid)) {
+ igt_debug("DSC not supported on pipe A on external DP in gen11 platforms\n");
+ return false;
+ }
+
+ return true;
+}
+/* re-probe connectors and do a modeset with DSC */
+static void update_display(data_t *data, igt_output_t *output, enum pipe pipe,
+ enum dsc_test_type test_type)
{
bool enabled;
igt_plane_t *primary;
+ drmModeModeInfo *mode;
+ igt_display_t *display = &data->display;
+ drmModeConnector *connector = data->output->config.connector;
- /* Disable the output first */
- igt_output_set_pipe(data->output, PIPE_NONE);
- igt_display_commit(&data->display);
+ /* sanitize the state before starting the subtest. */
+ igt_display_reset(display);
+ igt_display_commit(display);
igt_debug("DSC is supported on %s\n", data->conn_name);
save_force_dsc_en(data);
force_dsc_enable(data);
- if (test_type == test_dsc_compression_bpp) {
+
+ if (test_type == TEST_DSC_COMPRESSION_BPP) {
igt_debug("Trying to set BPP to %d\n", data->compression_bpp);
force_dsc_enable_bpp(data);
}
- igt_output_set_pipe(data->output, data->pipe);
- qsort(data->output->config.connector->modes,
- data->output->config.connector->count_modes,
- sizeof(drmModeModeInfo),
- sort_drm_modes);
- igt_output_override_mode(data->output, &data->output->config.connector->modes[0]);
+ igt_output_set_pipe(data->output, pipe);
+
+ mode = get_highres_mode(connector);
+ igt_require(mode != NULL);
+ igt_output_override_mode(data->output, mode);
+
primary = igt_output_get_plane_type(data->output,
DRM_PLANE_TYPE_PRIMARY);
+ igt_create_pattern_fb(data->drm_fd,
+ mode->hdisplay,
+ mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_MOD_LINEAR,
+ &data->fb_test_pattern);
- /* Now set the output to the desired mode */
igt_plane_set_fb(primary, &data->fb_test_pattern);
igt_display_commit(&data->display);
/*
- * Until we have CRC check support, manually check if RGB test
+ * until we have CRC check support, manually check if RGB test
* pattern has no corruption.
*/
manual("RGB test pattern without corruption");
- enabled = igt_is_dsc_enabled(data->drm_fd,
- data->output->config.connector);
+ enabled = igt_is_dsc_enabled(data->drm_fd, connector);
restore_force_dsc_en();
igt_debug("Reset compression BPP\n");
data->compression_bpp = 0;
force_dsc_enable_bpp(data);
igt_assert_f(enabled,
- "Default DSC enable failed on Connector: %s Pipe: %s\n",
+ "Default DSC enable failed on connector: %s pipe: %s\n",
data->conn_name,
- kmstest_pipe_name(data->pipe));
+ kmstest_pipe_name(pipe));
+
+ igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
+ igt_plane_set_fb(primary, NULL);
+ igt_output_set_pipe(data->output, PIPE_NONE);
}
-static void run_test(data_t *data, enum dsc_test_type test_type)
+static void test_dsc(data_t *data, enum dsc_test_type test_type)
{
+ igt_display_t *display = &data->display;
+ igt_output_t *output;
enum pipe pipe;
char test_name[10];
- igt_skip_on_f(test_type == test_dsc_compression_bpp &&
- data->output->config.connector->modes[0].hdisplay >= 5120,
- "bigjoiner does not support force bpp\n");
-
- igt_create_pattern_fb(data->drm_fd,
- data->output->config.connector->modes[0].hdisplay,
- data->output->config.connector->modes[0].vdisplay,
- DRM_FORMAT_XRGB8888,
- DRM_FORMAT_MOD_LINEAR,
- &data->fb_test_pattern);
+ for_each_pipe_with_valid_output(display, pipe, output) {
+ if (!check_dsc_on_connector(data, output))
+ continue;
- for_each_pipe(&data->display, pipe) {
- uint32_t devid = intel_get_drm_devid(data->drm_fd);
+ if (!check_big_joiner_test_constraint(data, output, test_type))
+ continue;
- if (data->output->config.connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort &&
- pipe == PIPE_A && IS_GEN11(devid)) {
- igt_debug("DSC not supported on Pipe A on external DP in Gen11 platforms\n");
+ if (!check_dp_gen11_constraint(data, output, pipe))
continue;
- }
- snprintf(test_name, sizeof(test_name), "-%dbpp", data->compression_bpp);
- if (!igt_pipe_connector_valid(pipe, data->output))
+ if (!check_big_joiner_pipe_constraint(data, output, pipe))
continue;
- igt_dynamic_f("%s-pipe-%s%s", data->output->name,
- kmstest_pipe_name(pipe),
- (test_type == test_dsc_compression_bpp) ?
- test_name : "") {
- data->pipe = pipe;
- igt_skip_on_f((data->output->config.connector->modes[0].hdisplay >= 5120) &&
- (pipe == (data->n_pipes - 1)),
- "pipe-%s not supported due to bigjoiner limitation\n",
- kmstest_pipe_name(pipe));
- update_display(data, test_type);
+ if (!igt_pipe_connector_valid(pipe, output))
+ continue;
- }
- if (test_type == test_dsc_compression_bpp)
- break;
+ snprintf(test_name, sizeof(test_name), "-%dbpp", data->compression_bpp);
+ igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(pipe), output->name,
+ (test_type == TEST_DSC_COMPRESSION_BPP) ? test_name : "")
+ update_display(data, output, pipe, test_type);
}
-
- igt_remove_fb(data->drm_fd, &data->fb_test_pattern);
}
igt_main
{
data_t data = {};
- drmModeRes *res;
- drmModeConnector *connector = NULL;
- int i, j;
+ int i;
+
igt_fixture {
data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
data.devid = intel_get_drm_devid(data.drm_fd);
kmstest_set_vt_graphics_mode();
igt_install_exit_handler(kms_dsc_exit_handler);
igt_display_require(&data.display, data.drm_fd);
- igt_require(res = drmModeGetResources(data.drm_fd));
+ igt_display_require_output(&data.display);
data.n_pipes = 0;
for_each_pipe(&data.display, i)
data.n_pipes++;
}
- igt_subtest_with_dynamic("basic-dsc-enable") {
- for (j = 0; j < res->count_connectors; j++) {
- if (!check_dsc_on_connector(&data, res->connectors[j]))
- continue;
- run_test(&data, test_basic_dsc_enable);
- }
- }
+
+ igt_describe("Tests basic display stream compression functionality if supported "
+ "by a connector by forcing DSC on all connectors that support it "
+ "with default parameters");
+ igt_subtest_with_dynamic("basic-dsc-enable")
+ test_dsc(&data, TEST_BASIC_DSC_ENABLE);
+
/* currently we are validating compression bpp on XRGB8888 format only */
+ igt_describe("Tests basic display stream compression functionality if supported "
+ "by a connector by forcing DSC on all connectors that support it "
+ "with certain BPP as the output BPP for the connector");
igt_subtest_with_dynamic("XRGB8888-dsc-compression") {
uint32_t bpp_list[] = {
XRGB8888_DRM_FORMAT_MIN_BPP,
(XRGB8888_DRM_FORMAT_MIN_BPP +
- (XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1) / 2,
+ (XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1) / 2,
(XRGB8888_DRM_FORMAT_MIN_BPP * 3) - 1
};
igt_require(intel_display_ver(data.devid) >= 13);
- for (j = 0; j < res->count_connectors; j++) {
- if (!check_dsc_on_connector(&data, res->connectors[j]))
- continue;
-
- for (i = 0; i < ARRAY_SIZE(bpp_list); i++) {
- data.compression_bpp = bpp_list[i];
- run_test(&data, test_dsc_compression_bpp);
- }
+ for (int j = 0; j < ARRAY_SIZE(bpp_list); j++) {
+ data.compression_bpp = bpp_list[j];
+ test_dsc(&data, TEST_DSC_COMPRESSION_BPP);
}
}
igt_fixture {
- if (connector)
- drmModeFreeConnector(connector);
- test_cleanup(&data);
- drmModeFreeResources(res);
igt_display_fini(&data.display);
close(data.drm_fd);
}
--
2.25.1
More information about the igt-dev
mailing list