[igt-dev] [PATCH i-g-t v4 5/7] tests/chamelium/kms_color_chamelium: MPO + pipe color test for degamma
Ananya Sharma
ananya.sharma at intel.com
Thu Nov 10 07:08:26 UTC 2022
Adding multiple planes with two different formats i.e. RGB and
NV12 in pipe color test for degamma in kms_color_chamelium too
as we can expect crc mismatches due to the hardware round-ups
the LUT values. This will also increase the coverage in color
management.
Signed-off-by: Ananya Sharma <ananya.sharma at intel.com>
---
tests/chamelium/kms_color_chamelium.c | 132 +++++++++++++++++++-------
1 file changed, 99 insertions(+), 33 deletions(-)
diff --git a/tests/chamelium/kms_color_chamelium.c b/tests/chamelium/kms_color_chamelium.c
index 4a8cb339..6043718c 100644
--- a/tests/chamelium/kms_color_chamelium.c
+++ b/tests/chamelium/kms_color_chamelium.c
@@ -33,19 +33,28 @@ IGT_TEST_DESCRIPTION("Test Color Features at Pipe level using Chamelium to verif
*/
static bool test_pipe_degamma(data_t *data,
igt_plane_t *primary,
+ bool multiplane,
struct chamelium_port *port)
{
igt_output_t *output = data->output;
+ igt_plane_t *overlay = data->overlay;
gamma_lut_t *degamma_full;
drmModeModeInfo *mode = data->mode;
- struct igt_fb fb_modeset, fb, fbref;
+ struct igt_fb fb0, fb1, fbref;
struct chamelium_frame_dump *frame_fullcolors;
- int fb_id, fb_modeset_id, fbref_id;
+ int fb_id0, fb_id1, fbref_id;
color_t red_green_blue[] = {
{ 1.0, 0.0, 0.0 },
{ 0.0, 1.0, 0.0 },
{ 0.0, 0.0, 1.0 }
};
+ color_t blue_red_green[] = {
+ { 0.0, 1.0, 0.0 },
+ { 0.0, 0.0, 1.0 },
+ { 1.0, 0.0, 0.0 }
+ };
+ int primary_x, primary_y, primary_h, primary_w;
+ int overlay_x, overlay_y, overlay_h, overlay_w;
bool ret;
igt_require(igt_pipe_obj_has_prop(primary->pipe, IGT_CRTC_DEGAMMA_LUT));
@@ -54,22 +63,39 @@ static bool test_pipe_degamma(data_t *data,
igt_output_set_pipe(output, primary->pipe->pipe);
- /* Create a framebuffer at the size of the output. */
- fb_id = igt_create_fb(data->drm_fd,
- mode->hdisplay,
- mode->vdisplay,
- DRM_FORMAT_XRGB8888,
- DRM_FORMAT_MOD_LINEAR,
- &fb);
- igt_assert(fb_id);
+ primary_w = mode->hdisplay;
+ primary_h = mode->vdisplay/2;
+ overlay_w = mode->hdisplay;
+ overlay_h = primary_h + (mode->vdisplay % 2);
+ primary_x = 0;
+ primary_y = 0;
+ overlay_x = 0;
+ overlay_y = primary_h;
- fb_modeset_id = igt_create_fb(data->drm_fd,
- mode->hdisplay,
- mode->vdisplay,
- DRM_FORMAT_XRGB8888,
- DRM_FORMAT_MOD_LINEAR,
- &fb_modeset);
- igt_assert(fb_modeset_id);
+ /* Create a framebuffer at the size of the output. */
+ fb_id0 = igt_create_fb(data->drm_fd,
+ primary_w,
+ primary_h,
+ data->drm_format,
+ DRM_FORMAT_MOD_LINEAR,
+ &fb0);
+ igt_assert(fb_id0);
+
+ igt_plane_set_fb(primary, &fb0);
+ igt_plane_set_position(primary, primary_x, primary_y);
+
+ if (multiplane) {
+ fb_id1 = igt_create_fb(data->drm_fd,
+ overlay_w,
+ overlay_h,
+ data->drm_format_overlay,
+ DRM_FORMAT_MOD_LINEAR,
+ &fb1);
+ igt_assert(fb_id1);
+
+ igt_plane_set_fb(overlay, &fb1);
+ igt_plane_set_position(overlay, overlay_x, overlay_y);
+ }
fbref_id = igt_create_fb(data->drm_fd,
mode->hdisplay,
@@ -79,23 +105,31 @@ static bool test_pipe_degamma(data_t *data,
&fbref);
igt_assert(fbref_id);
- igt_plane_set_fb(primary, &fb_modeset);
disable_ctm(primary->pipe);
disable_gamma(primary->pipe);
- igt_display_commit(&data->display);
+ igt_display_commit2(&data->display, multiplane ? COMMIT_ATOMIC : COMMIT_LEGACY);
- /* Draw solid colors with linear degamma transformation. */
- paint_rectangles(data, mode->vdisplay, mode->hdisplay,
- 0, 0, red_green_blue, &fbref);
+ /* Draw solid colors with no degamma transformation. */
+ paint_rectangles(data, primary_h, primary_w, 0, 0, red_green_blue, &fbref);
+ paint_rectangles(data, overlay_h, overlay_w, 0, 0, blue_red_green, &fbref);
/* Draw a gradient with degamma LUT to remap all
* values to max red/green/blue.
*/
- paint_gradient_rectangles(data, mode->vdisplay, mode->hdisplay,
- 0, 0, red_green_blue, &fb);
- igt_plane_set_fb(primary, &fb);
+ paint_gradient_rectangles(data, primary_h, primary_w,
+ primary_x, primary_y, red_green_blue, &fb0);
+ igt_plane_set_fb(primary, &fb0);
+ igt_plane_set_position(primary, primary_x, primary_y);
+
+ if (multiplane) {
+ paint_gradient_rectangles(data, overlay_h, overlay_w, 0, 0,
+ blue_red_green, &fb1);
+ igt_plane_set_fb(overlay, &fb1);
+ igt_plane_set_position(overlay, overlay_x, overlay_y);
+ }
+
set_degamma(data, primary->pipe, degamma_full);
- igt_display_commit(&data->display);
+ igt_display_commit2(&data->display, multiplane ? COMMIT_ATOMIC : COMMIT_LEGACY);
chamelium_capture(data->chamelium, port, 0, 0, 0, 0, 1);
frame_fullcolors =
chamelium_read_captured_frame(data->chamelium, 0);
@@ -110,8 +144,10 @@ static bool test_pipe_degamma(data_t *data,
disable_degamma(primary->pipe);
igt_plane_set_fb(primary, NULL);
+ if (multiplane)
+ igt_plane_set_fb(overlay, NULL);
igt_output_set_pipe(output, PIPE_NONE);
- igt_display_commit(&data->display);
+ igt_display_commit2(&data->display, multiplane ? COMMIT_ATOMIC : COMMIT_LEGACY);
free_lut(degamma_full);
return ret;
@@ -124,6 +160,7 @@ static bool test_pipe_degamma(data_t *data,
*/
static bool test_pipe_gamma(data_t *data,
igt_plane_t *primary,
+ bool multiplane,
struct chamelium_port *port)
{
igt_output_t *output = data->output;
@@ -454,9 +491,11 @@ static int test_setup(data_t *data, enum pipe p)
}
static void
-run_gamma_degamma_tests_for_pipe(data_t *data, enum pipe p,
- bool (*test_t)(data_t*, igt_plane_t*, struct chamelium_port*))
+run_gamma_degamma_tests_for_pipe(data_t *data, enum pipe p, bool multiplane,
+ bool (*test_t)(data_t*, igt_plane_t*, bool, struct chamelium_port*))
{
+ igt_plane_t *overlay;
+ int count = 0;
int port_idx = test_setup(data, p);
igt_require(port_idx >= 0);
@@ -465,8 +504,25 @@ run_gamma_degamma_tests_for_pipe(data_t *data, enum pipe p,
data->drm_format = DRM_FORMAT_XRGB8888;
data->mode = igt_output_get_mode(data->output);
+ if (multiplane) {
+ for_each_plane_on_pipe(&data->display, p, overlay) {
+ if (overlay->type != DRM_PLANE_TYPE_OVERLAY)
+ continue;
+
+ if (igt_plane_has_format_mod(overlay, DRM_FORMAT_NV12,
+ DRM_FORMAT_MOD_LINEAR)) {
+ count++;
+ break;
+ }
+ }
+ igt_require_f(count, "No valid planes found.\n");
+ }
+
+ data->overlay = overlay;
+ data->drm_format_overlay = DRM_FORMAT_NV12;
+
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(p), data->output->name)
- igt_assert(test_t(data, data->primary, data->ports[port_idx]));
+ igt_assert(test_t(data, data->primary, multiplane, data->ports[port_idx]));
}
static void
@@ -555,13 +611,17 @@ run_tests_for_pipe(data_t *data)
enum pipe pipe;
struct {
const char *name;
- bool (*test_t)(data_t*, igt_plane_t*, struct chamelium_port*);
+ bool (*test_t)(data_t*, igt_plane_t*, bool, struct chamelium_port*);
+ bool multiplane;
const char *desc;
} gamma_degamma_tests[] = {
- { "degamma", test_pipe_degamma,
+ { "degamma", test_pipe_degamma, false,
"Verify that degamma LUT transformation works correctly" },
- { "gamma", test_pipe_gamma,
+ { "degamma-multiplane", test_pipe_degamma, true,
+ "Verify that degamma LUT transformation works correctly for multiplanes" },
+
+ { "gamma", test_pipe_gamma, false,
"Verify that gamma LUT transformation works correctly" },
};
struct {
@@ -643,8 +703,14 @@ run_tests_for_pipe(data_t *data)
for (i = 0; i < ARRAY_SIZE(gamma_degamma_tests); i++) {
igt_describe_f("%s", gamma_degamma_tests[i].desc);
igt_subtest_with_dynamic_f("%s", gamma_degamma_tests[i].name) {
+ if (gamma_degamma_tests[i].multiplane &&
+ (!data->display.is_atomic ||
+ !igt_display_has_format_mod(&data->display, DRM_FORMAT_NV12,
+ DRM_FORMAT_MOD_LINEAR)))
+ continue;
for_each_pipe(&data->display, pipe) {
run_gamma_degamma_tests_for_pipe(data, pipe,
+ gamma_degamma_tests[i].multiplane,
gamma_degamma_tests[i].test_t);
}
}
--
2.25.1
More information about the igt-dev
mailing list