[igt-dev] [PATCH 1/3] tests/i915/i915_pm_backlight: Add new subtest to validate dual panel backlight
Hogander, Jouni
jouni.hogander at intel.com
Tue Nov 15 10:54:23 UTC 2022
One inline comment below.
On Tue, 2022-11-15 at 11:46 +0530, Nidhi Gupta wrote:
> Since driver can now support multiple eDPs and Debugfs structure for
> backlight changed per connector the test should then iterate through
> all eDP connectors.
>
> Signed-off-by: Nidhi Gupta <nidhi1.gupta at intel.com>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> ---
> tests/i915/i915_pm_backlight.c | 210 +++++++++++++++++++++++++++++--
> ----------
> 1 file changed, 150 insertions(+), 60 deletions(-)
>
> diff --git a/tests/i915/i915_pm_backlight.c
> b/tests/i915/i915_pm_backlight.c
> index cafae7f..cf58f8b 100644
> --- a/tests/i915/i915_pm_backlight.c
> +++ b/tests/i915/i915_pm_backlight.c
> @@ -34,29 +34,34 @@
> #include <errno.h>
> #include <unistd.h>
> #include <time.h>
> +#include "igt_device.h"
> +#include "igt_device_scan.h"
>
> struct context {
> int max;
> + igt_output_t *output;
> + char path[PATH_MAX];
> };
>
> -
> #define TOLERANCE 5 /* percent */
> -#define BACKLIGHT_PATH "/sys/class/backlight/intel_backlight"
> +#define BACKLIGHT_PATH "/sys/class/backlight"
>
> #define FADESTEPS 10
> #define FADESPEED 100 /* milliseconds between steps */
>
> +#define NUM_EDP_OUTPUTS 2
> +
> IGT_TEST_DESCRIPTION("Basic backlight sysfs test");
>
> -static int backlight_read(int *result, const char *fname)
> +static int backlight_read(int *result, const char *fname, struct
> context *context)
> {
> int fd;
> char full[PATH_MAX];
> char dst[64];
> int r, e;
>
> - igt_assert(snprintf(full, PATH_MAX, "%s/%s", BACKLIGHT_PATH,
> fname) < PATH_MAX);
> -
> + igt_assert(snprintf(full, PATH_MAX, "%s/%s/%s",
> BACKLIGHT_PATH, context->path, fname)
> + < PATH_MAX);
> fd = open(full, O_RDONLY);
> if (fd == -1)
> return -errno;
> @@ -73,14 +78,15 @@ static int backlight_read(int *result, const char
> *fname)
> return errno;
> }
>
> -static int backlight_write(int value, const char *fname)
> +static int backlight_write(int value, const char *fname, struct
> context *context)
> {
> int fd;
> char full[PATH_MAX];
> char src[64];
> int len;
>
> - igt_assert(snprintf(full, PATH_MAX, "%s/%s", BACKLIGHT_PATH,
> fname) < PATH_MAX);
> + igt_assert(snprintf(full, PATH_MAX, "%s/%s/%s",
> BACKLIGHT_PATH, context->path, fname)
> + < PATH_MAX);
> fd = open(full, O_WRONLY);
> if (fd == -1)
> return -errno;
> @@ -100,12 +106,12 @@ static void test_and_verify(struct context
> *context, int val)
> const int tolerance = val * TOLERANCE / 100;
> int result;
>
> - igt_assert_eq(backlight_write(val, "brightness"), 0);
> - igt_assert_eq(backlight_read(&result, "brightness"), 0);
> + igt_assert_eq(backlight_write(val, "brightness", context),
> 0);
> + igt_assert_eq(backlight_read(&result, "brightness", context),
> 0);
> /* Check that the exact value sticks */
> igt_assert_eq(result, val);
>
> - igt_assert_eq(backlight_read(&result, "actual_brightness"),
> 0);
> + igt_assert_eq(backlight_read(&result, "actual_brightness",
> context), 0);
> /* Some rounding may happen depending on hw */
> igt_assert_f(result >= max(0, val - tolerance) &&
> result <= min(context->max, val + tolerance),
> @@ -124,16 +130,16 @@ static void test_bad_brightness(struct context
> *context)
> {
> int val;
> /* First write some sane value */
> - backlight_write(context->max / 2, "brightness");
> + backlight_write(context->max / 2, "brightness", context);
> /* Writing invalid values should fail and not change the
> value */
> - igt_assert_lt(backlight_write(-1, "brightness"), 0);
> - backlight_read(&val, "brightness");
> + igt_assert_lt(backlight_write(-1, "brightness", context), 0);
> + backlight_read(&val, "brightness", context);
> igt_assert_eq(val, context->max / 2);
> - igt_assert_lt(backlight_write(context->max + 1,
> "brightness"), 0);
> - backlight_read(&val, "brightness");
> + igt_assert_lt(backlight_write(context->max + 1, "brightness",
> context), 0);
> + backlight_read(&val, "brightness", context);
> igt_assert_eq(val, context->max / 2);
> - igt_assert_lt(backlight_write(INT_MAX, "brightness"), 0);
> - backlight_read(&val, "brightness");
> + igt_assert_lt(backlight_write(INT_MAX, "brightness",
> context), 0);
> + backlight_read(&val, "brightness", context);
> igt_assert_eq(val, context->max / 2);
> }
>
> @@ -179,21 +185,57 @@ test_fade_with_suspend(struct context *context,
> igt_output_t *output)
> test_fade(context);
> }
>
> +static void test_cleanup(igt_display_t *display, igt_output_t
> *output)
> +{
> + igt_output_set_pipe(output, PIPE_NONE);
> + igt_display_commit2(display, display->is_atomic ?
> COMMIT_ATOMIC : COMMIT_LEGACY);
> + igt_pm_restore_sata_link_power_management();
> +}
> +
> +static void test_setup(igt_display_t display, igt_output_t *output)
> +{
> + igt_plane_t *primary;
> + drmModeModeInfo *mode;
> + struct igt_fb fb;
> + enum pipe pipe;
> +
> + igt_display_reset(&display);
> +
> + for_each_pipe(&display, pipe) {
> + if (!igt_pipe_connector_valid(pipe, output))
> + continue;
> +
> + igt_output_set_pipe(output, pipe);
> + mode = igt_output_get_mode(output);
> +
> + igt_create_pattern_fb(display.drm_fd,
> + mode->hdisplay, mode->vdisplay,
> + DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_MOD_LINEAR, &fb);
> + primary = igt_output_get_plane_type(output,
> DRM_PLANE_TYPE_PRIMARY);
> + igt_plane_set_fb(primary, &fb);
> +
> + igt_display_commit2(&display, display.is_atomic ?
> COMMIT_ATOMIC : COMMIT_LEGACY);
> + igt_pm_enable_sata_link_power_management();
> +
> + break;
> + }
> +}
> +
> igt_main
> {
> - struct context context = {0};
> - int old;
> + int old, fd;
> + int i = 0;
> igt_display_t display;
> igt_output_t *output;
> - struct igt_fb fb;
> + char file_path_n[PATH_MAX] = "";
> + bool dual_edp = false;
> + struct context contexts[NUM_EDP_OUTPUTS];
>
> igt_fixture {
> - enum pipe pipe;
> bool found = false;
> char full_name[32] = {};
> char *name;
> - drmModeModeInfo *mode;
> - igt_plane_t *primary;
>
> /*
> * Backlight tests requires the output to be enabled,
> @@ -202,56 +244,104 @@ igt_main
> kmstest_set_vt_graphics_mode();
> igt_display_require(&display,
> drm_open_driver(DRIVER_INTEL));
>
> - /* Get the max value and skip the whole test if sysfs
> interface not available */
> - igt_skip_on(backlight_read(&old, "brightness"));
> - igt_assert(backlight_read(&context.max,
> "max_brightness") > -1);
> + for_each_connected_output(&display, output) {
> + if (output->config.connector->connector_type
> != DRM_MODE_CONNECTOR_eDP)
> + continue;
>
> - /* should be ../../cardX-$output */
> - igt_assert_lt(12, readlink(BACKLIGHT_PATH "/device",
> full_name, sizeof(full_name) - 1));
> - name = basename(full_name);
> + if (found)
> + snprintf(file_path_n, PATH_MAX,
> "%s/card%i-%s-backlight/brightness",
> + BACKLIGHT_PATH,
> igt_device_get_card_index(display.drm_fd),
> + igt_output_name(output));
> + else
> + snprintf(file_path_n, PATH_MAX,
> "%s/intel_backlight/brightness",
> + BACKLIGHT_PATH);
>
> - for_each_pipe_with_valid_output(&display, pipe,
> output) {
> - if (strcmp(name + 6, output->name))
> + fd = open(file_path_n, O_RDONLY);
> + if (fd == -1)
> continue;
> - found = true;
> - break;
> - }
>
> - igt_require_f(found,
> - "Could not map backlight for \"%s\" to
> connected output\n",
> - name);
> -
> - igt_output_set_pipe(output, pipe);
> - mode = igt_output_get_mode(output);
> + if (found)
> + snprintf(contexts[i].path, PATH_MAX,
> "card%i-%s-backlight",
> +
> igt_device_get_card_index(display.drm_fd),
> + igt_output_name(output));
> + else
> + snprintf(contexts[i].path, PATH_MAX,
> "intel_backlight");
> +
> + close(fd);
> +
> + /* should be ../../cardX-$output */
> + snprintf(file_path_n, PATH_MAX,
> "%s/%s/device", BACKLIGHT_PATH,
> + contexts[i].path);
> + igt_assert_lt(16, readlink(file_path_n,
> full_name, sizeof(full_name) - 1));
> + name = basename(full_name);
> +
> + if (!strcmp(name + 6, output->name)) {
> + contexts[i++].output = output;
> +
> + if (found)
> + dual_edp = true;
> + else
> + found = true;
> + }
> + }
> + igt_require_f(found, "No valid output found.\n");
> + }
>
> - igt_create_pattern_fb(display.drm_fd,
> - mode->hdisplay, mode->vdisplay,
> - DRM_FORMAT_XRGB8888,
> - DRM_FORMAT_MOD_LINEAR, &fb);
> - primary = igt_output_get_plane_type(output,
> DRM_PLANE_TYPE_PRIMARY);
> - igt_plane_set_fb(primary, &fb);
> + igt_subtest("basic-brightness") {
> + for (i = 0; i < (dual_edp ? 2 : 1); i++) {
> + test_setup(display, &contexts->output[i]);
> + igt_assert(backlight_read(&contexts[i].max,
> + "max_brightness",
> &contexts[i]) > -1);
Instead of reading this many times for each test and for each backlight
you could do it once in the loop where contexts array is filled.
> + test_brightness(&contexts[i]);
> + test_cleanup(&display, output);
> + }
> + }
>
> - igt_display_commit2(&display, display.is_atomic ?
> COMMIT_ATOMIC : COMMIT_LEGACY);
> - igt_pm_enable_sata_link_power_management();
> + igt_subtest("bad-brightness") {
> + for (i = 0; i < (dual_edp ? 2 : 1); i++) {
> + test_setup(display, &contexts->output[i]);
> + igt_assert(backlight_read(&contexts[i].max,
> + "max_brightness",
> &contexts[i]) > -1);
> + test_bad_brightness(&contexts[i]);
> + test_cleanup(&display, output);
> + }
> }
> + igt_subtest("fade") {
> + for (i = 0; i < (dual_edp ? 2 : 1); i++) {
> + test_setup(display, &contexts->output[i]);
> + igt_assert(backlight_read(&contexts[i].max,
> + "max_brightness",
> &contexts[i]) > -1);
> + test_fade(&contexts[i]);
> + test_cleanup(&display, output);
> + }
> + }
> + igt_subtest("fade_with_dpms") {
> + for (i = 0; i < (dual_edp ? 2 : 1); i++) {
> + test_setup(display, &contexts->output[i]);
> + igt_assert(backlight_read(&contexts[i].max,
> + "max_brightness",
> &contexts[i]) > -1);
> + test_fade_with_dpms(&contexts[i], output);
> + test_cleanup(&display, output);
> + }
> + }
> + igt_subtest("fade_with_suspend") {
> + for (i = 0; i < (dual_edp ? 2 : 1); i++) {
> + test_setup(display, &contexts->output[i]);
> + igt_assert(backlight_read(&contexts[i].max,
> + "max_brightness",
> &contexts[i]) > -1);
> + test_fade_with_suspend(&contexts[i], output);
> + test_cleanup(&display, output);
> + }
> + }
> +
>
> - igt_subtest("basic-brightness")
> - test_brightness(&context);
> - igt_subtest("bad-brightness")
> - test_bad_brightness(&context);
> - igt_subtest("fade")
> - test_fade(&context);
> - igt_subtest("fade_with_dpms")
> - test_fade_with_dpms(&context, output);
> - igt_subtest("fade_with_suspend")
> - test_fade_with_suspend(&context, output);
>
> igt_fixture {
> /* Restore old brightness */
> - backlight_write(old, "brightness");
> + for (i = 0; i < (dual_edp ? 2 : 1); i++)
> + backlight_write(old, "brightness",
> &contexts[i]);
>
> igt_display_fini(&display);
> - igt_remove_fb(display.drm_fd, &fb);
> igt_pm_restore_sata_link_power_management();
> close(display.drm_fd);
> }
More information about the igt-dev
mailing list