[igt-dev] [PATCH v3] [NEW] Chamelium: Add new EDID Resolution List test
Petri Latvala
petri.latvala at intel.com
Wed Nov 16 09:41:38 UTC 2022
On Tue, Nov 15, 2022 at 12:52:57PM -0500, Mark Yacoub wrote:
> [Why]
> 1. Users can change resolutions of monitors on the fly.
> 2. Monitors can come with different shapes and form aka different modes.
> Test a change between different modes on the fly.
>
> [How]
> 1. Created an EDID based on a random combination of screen size, Refresh
> Rate and Aspect Ratio.
> 2. Set that EDID to Chamelium.
> 3. Iterate over every mode on the connector, assign it to the connector
> and check that the screen resolution changes to this one.
>
> Test Based on: [ChromeOS AutoTest
> display_ResolutionList](https://chromium.googlesource.com/chromiumos/third_party/autotest/+/HEAD/server/site_tests/display_ResolutionList/display_ResolutionList.py)
>
> Tested on: TGL with Cv3
>
> Signed-off-by: Mark Yacoub <markyacoub at chromium.org>
> ---
> lib/igt_edid.c | 7 +++-
> lib/igt_edid.h | 2 +
> lib/igt_kms.c | 32 +++++++++++++++
> lib/igt_kms.h | 5 ++-
> tests/chamelium/kms_chamelium.c | 69 +++++++++++++++++++++++++++++++++
> 5 files changed, 112 insertions(+), 3 deletions(-)
>
> diff --git a/lib/igt_edid.c b/lib/igt_edid.c
> index bff13a0d..b5e0b4ba 100644
> --- a/lib/igt_edid.c
> +++ b/lib/igt_edid.c
> @@ -60,8 +60,11 @@ static const char monitor_range_padding[] = {
>
> const uint8_t hdmi_ieee_oui[3] = {0x03, 0x0C, 0x00};
>
> -/* vfreq is in Hz */
> -static void std_timing_set(struct std_timing *st, int hsize, int vfreq,
> +/**
> + * std_timing_set: Sets the EDID standard timing for a given |hsize|, |vfreq|
> + * in Hz and |aspect| ratio
Use @param when referring to parameters.
With that changed,
Reviewed-by: Petri Latvala <petri.latvala at intel.com>
> + */
> + void std_timing_set(struct std_timing *st, int hsize, int vfreq,
> enum std_timing_aspect aspect)
> {
> assert(hsize >= 256 && hsize <= 2288);
> diff --git a/lib/igt_edid.h b/lib/igt_edid.h
> index a9251d68..477f16c2 100644
> --- a/lib/igt_edid.h
> +++ b/lib/igt_edid.h
> @@ -379,6 +379,8 @@ size_t edid_get_size(const struct edid *edid);
> void edid_get_mfg(const struct edid *edid, char out[static 3]);
> uint8_t edid_get_deep_color_from_vsdb(const struct edid *edid);
> uint8_t edid_get_bit_depth_from_vid(const struct edid *edid);
> +void std_timing_set(struct std_timing *st, int hsize, int vfreq,
> + enum std_timing_aspect aspect);
> void detailed_timing_set_mode(struct detailed_timing *dt, drmModeModeInfo *mode,
> int width_mm, int height_mm);
> void detailed_timing_set_monitor_range_mode(struct detailed_timing *dt,
> diff --git a/lib/igt_kms.c b/lib/igt_kms.c
> index 921a623d..b4a98ae1 100644
> --- a/lib/igt_kms.c
> +++ b/lib/igt_kms.c
> @@ -133,6 +133,36 @@ const struct edid *igt_kms_get_base_edid(void)
> return &edid;
> }
>
> +const struct edid *igt_kms_get_full_edid(void)
> +{
> + static struct edid edid;
> + drmModeModeInfo mode = {};
> +
> + mode.clock = 148500;
> + mode.hdisplay = 2288;
> + mode.hsync_start = 2008;
> + mode.hsync_end = 2052;
> + mode.htotal = 2200;
> + mode.vdisplay = 1287;
> + mode.vsync_start = 1084;
> + mode.vsync_end = 1089;
> + mode.vtotal = 1125;
> + mode.vrefresh = 144;
> + edid_init_with_mode(&edid, &mode);
> +
> + std_timing_set(&edid.standard_timings[0], 256, 60, STD_TIMING_16_10);
> + std_timing_set(&edid.standard_timings[1], 510, 69, STD_TIMING_4_3);
> + std_timing_set(&edid.standard_timings[2], 764, 78, STD_TIMING_5_4);
> + std_timing_set(&edid.standard_timings[3], 1018, 87, STD_TIMING_16_9);
> + std_timing_set(&edid.standard_timings[4], 1526, 96, STD_TIMING_16_10);
> + std_timing_set(&edid.standard_timings[5], 1780, 105, STD_TIMING_4_3);
> + std_timing_set(&edid.standard_timings[6], 2034, 114, STD_TIMING_5_4);
> + std_timing_set(&edid.standard_timings[7], 2288, 123, STD_TIMING_16_9);
> +
> + edid_update_checksum(&edid);
> + return &edid;
> +}
> +
> const struct edid *igt_kms_get_base_tile_edid(void)
> {
> static struct edid edid;
> @@ -548,6 +578,8 @@ const struct edid *igt_kms_get_custom_edid(enum igt_custom_edid_type edid)
> switch (edid) {
> case IGT_CUSTOM_EDID_BASE:
> return igt_kms_get_base_edid();
> + case IGT_CUSTOM_EDID_FULL:
> + return igt_kms_get_full_edid();
> case IGT_CUSTOM_EDID_ALT:
> return igt_kms_get_alt_edid();
> case IGT_CUSTOM_EDID_HDMI_AUDIO:
> diff --git a/lib/igt_kms.h b/lib/igt_kms.h
> index b09441d0..7a00d204 100644
> --- a/lib/igt_kms.h
> +++ b/lib/igt_kms.h
> @@ -82,6 +82,7 @@ enum port {
> *
> * Enum used for the helper function igt_custom_edid_type
> * @IGT_CUSTOM_EDID_BASE: Returns base edid
> + * @IGT_CUSTOM_EDID_FULL: Returns edid with full list of standard timings.
> * @IGT_CUSTOM_EDID_ALT: Returns alternate edid
> * @IGT_CUSTOM_EDID_HDMI_AUDIO: Returns edid with HDMI audio block
> * @IGT_CUSTOM_EDID_DP_AUDIO: Returns edid with DP audio block
> @@ -89,12 +90,13 @@ enum port {
> */
> enum igt_custom_edid_type {
> IGT_CUSTOM_EDID_BASE,
> + IGT_CUSTOM_EDID_FULL,
> IGT_CUSTOM_EDID_ALT,
> IGT_CUSTOM_EDID_HDMI_AUDIO,
> IGT_CUSTOM_EDID_DP_AUDIO,
> IGT_CUSTOM_EDID_ASPECT_RATIO,
> };
> -#define IGT_CUSTOM_EDID_COUNT 5
> +#define IGT_CUSTOM_EDID_COUNT 6
>
> /**
> * kmstest_port_name:
> @@ -865,6 +867,7 @@ void igt_reset_connectors(void);
> uint32_t kmstest_get_vbl_flag(int crtc_offset);
>
> const struct edid *igt_kms_get_base_edid(void);
> +const struct edid *igt_kms_get_full_edid(void);
> const struct edid *igt_kms_get_base_tile_edid(void);
> const struct edid *igt_kms_get_alt_edid(void);
> const struct edid *igt_kms_get_hdmi_audio_edid(void);
> diff --git a/tests/chamelium/kms_chamelium.c b/tests/chamelium/kms_chamelium.c
> index 2bc97d5a..d2ec5175 100644
> --- a/tests/chamelium/kms_chamelium.c
> +++ b/tests/chamelium/kms_chamelium.c
> @@ -2612,6 +2612,71 @@ static void edid_stress_resolution(data_t *data, struct chamelium_port *port,
> data->ports, data->port_count);
> }
>
> +static const char igt_edid_resolution_list_desc[] =
> + "Get an EDID with many modes of different configurations, set them on the screen and check the"
> + " screen resolution matches the mode resolution.";
> +
> +static void edid_resolution_list(data_t *data, struct chamelium_port *port)
> +{
> + struct chamelium *chamelium = data->chamelium;
> + struct udev_monitor *mon = igt_watch_uevents();
> + drmModeConnector *init_connector;
> + drmModeModeInfoPtr modes;
> + int count_modes;
> + int i;
> + igt_output_t *output;
> + enum pipe pipe;
> +
> + chamelium_unplug(chamelium, port);
> + set_edid(data, port, IGT_CUSTOM_EDID_FULL);
> +
> + igt_flush_uevents(mon);
> + chamelium_plug(chamelium, port);
> + wait_for_connector_after_hotplug(data, mon, port, DRM_MODE_CONNECTED);
> + igt_flush_uevents(mon);
> +
> + init_connector = chamelium_port_get_connector(chamelium, port, true);
> + modes = init_connector->modes;
> + count_modes = init_connector->count_modes;
> +
> + output = get_output_for_port(data, port);
> + pipe = get_pipe_for_output(&data->display, output);
> + igt_output_set_pipe(output, pipe);
> +
> + for (i = 0; i < count_modes; ++i)
> + igt_debug("#%d %s %uHz\n", i, modes[i].name, modes[i].vrefresh);
> +
> + for (i = 0; i < count_modes; ++i) {
> + struct chamelium_edid *chamelium_edid;
> + struct igt_fb fb = { 0 };
> + bool is_video_stable;
> + int screen_res_w, screen_res_h;
> + drmModeConnector *connector;
> + drmModeModeInfoPtr expected_mode;
> + bool is_same_mode;
> +
> + igt_info("Testing #%d %s %uHz\n", i, modes[i].name,
> + modes[i].vrefresh);
> +
> + /* Set the screen mode with the one we chose. */
> + create_fb_for_mode(data, &fb, &modes[i]);
> + enable_output(data, port, output, &modes[i], &fb);
> + is_video_stable = chamelium_port_wait_video_input_stable(
> + chamelium, port, 10);
> + igt_assert(is_video_stable);
> +
> + chamelium_port_get_resolution(chamelium, port, &screen_res_w,
> + &screen_res_h);
> + igt_assert_eq(screen_res_w, modes[i].hdisplay);
> + igt_assert_eq(screen_res_h, modes[i].vdisplay);
> +
> + igt_remove_fb(data->drm_fd, &fb);
> + }
> +
> + igt_modeset_disable_all_outputs(&data->display);
> + drmModeFreeConnector(init_connector);
> +}
> +
> #define for_each_port(p, port) \
> for (p = 0, port = data.ports[p]; \
> p < data.port_count; \
> @@ -2714,6 +2779,10 @@ igt_main
> edid_stress_resolution(&data, port, DP_EDIDS_NON_4K,
> ARRAY_SIZE(DP_EDIDS_NON_4K));
>
> + igt_describe(igt_edid_resolution_list_desc);
> + connector_subtest("dp-edid-resolution-list", DisplayPort)
> + edid_resolution_list(&data, port);
> +
> igt_describe(test_suspend_resume_hpd_desc);
> connector_subtest("dp-hpd-after-suspend", DisplayPort)
> test_suspend_resume_hpd(&data, port,
> --
> 2.38.1.431.g37b22c650d-goog
>
More information about the igt-dev
mailing list