[igt-dev] [PATCH i-g-t v2 3/3] tests/i915/kms_dsc: Enable validation for VDSC YCbCr420
Swati Sharma
swati2.sharma at intel.com
Thu Nov 24 11:57:14 UTC 2022
Existing i-g-t is extended to enable validation for VDSC YCbCr420.
If a mode is supported in both RGB and YCbCr420 output formats by the
sink, i915 driver policy is to try RGB first and fall back to YCbCr420, if
mode cannot be shown using RGB. To test YCbCr420, we need a debugfs
entry (force_dsc_ycbcr420) to force this output format; so that YCbCr420 code
gets executed.
>From i-g-t, we have set this debugfs entry. However, before setting
debugfs entry, we have checked capability i.e. YCbCr420 is supported by
both platform (D14+) and sink.
Also, all the modes doesn't support both YCbCr420 and RGB formats; so if
sink and platform supports YCbCr420 we will do try commit with each mode
till we get a successful commit.
v2: -used is_dsc_ycbcr420_supported() (Ankit)
-handled try-commit correctly (Ankit)
-instead of flag use enum for output formats (Ankit)
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
tests/i915/kms_dsc.c | 195 ++++++++++++++++++++++++++++++++-----------
1 file changed, 147 insertions(+), 48 deletions(-)
diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c
index 6fef764de..6a3eecdb4 100644
--- a/tests/i915/kms_dsc.c
+++ b/tests/i915/kms_dsc.c
@@ -53,6 +53,11 @@ enum dsc_test_type {
TEST_DSC_BPC
};
+enum dsc_output_format {
+ DSC_FORMAT_RGB444,
+ DSC_FORMAT_YCBCR420
+};
+
typedef struct {
int drm_fd;
uint32_t devid;
@@ -66,7 +71,10 @@ typedef struct {
} data_t;
bool force_dsc_en_orig;
+bool force_dsc_ycbcr420_en_orig;
int force_dsc_restore_fd = -1;
+int force_dsc_ycbcr420_restore_fd = -1;
+static int count = 0;
const struct {
const int format;
@@ -107,6 +115,16 @@ static void force_dsc_enable_bpc(data_t *data)
igt_assert_f(ret > 0, "forcing input dsc bpc debugfs_write failed\n");
}
+static void force_dsc_ycbcr420_enable(data_t *data)
+{
+ int ret;
+
+ igt_debug("Forcing DSC YCbCr420 on %s\n", data->output->name);
+ ret = igt_force_dsc_ycbcr420_enable(data->drm_fd,
+ data->output->name);
+ igt_assert_f(ret > 0, "forcing dsc ycbcr420 debugfs_write failed\n");
+}
+
static void save_force_dsc_en(data_t *data)
{
force_dsc_en_orig =
@@ -130,9 +148,34 @@ static void restore_force_dsc_en(void)
force_dsc_restore_fd = -1;
}
+static void save_force_dsc_ycbcr420_en(data_t *data)
+{
+ force_dsc_ycbcr420_en_orig =
+ igt_is_force_dsc_ycbcr420_enabled(data->drm_fd,
+ data->output->name);
+ force_dsc_ycbcr420_restore_fd =
+ igt_get_dsc_ycbcr420_debugfs_fd(data->drm_fd,
+ data->output->name);
+ igt_assert(force_dsc_ycbcr420_restore_fd >= 0);
+}
+
+static void restore_force_dsc_ycbcr420_en(void)
+{
+ if (force_dsc_ycbcr420_restore_fd < 0)
+ return;
+
+ igt_debug("Restoring DSC YCbCr420 enable\n");
+ igt_assert(write(force_dsc_ycbcr420_restore_fd, force_dsc_ycbcr420_en_orig ? "1" : "0", 1) == 1);
+
+ close(force_dsc_ycbcr420_restore_fd);
+ force_dsc_ycbcr420_restore_fd = -1;
+}
+
+
static void kms_dsc_exit_handler(int sig)
{
restore_force_dsc_en();
+ restore_force_dsc_ycbcr420_en();
}
static drmModeModeInfo *get_highres_mode(igt_output_t *output)
@@ -147,6 +190,20 @@ static drmModeModeInfo *get_highres_mode(igt_output_t *output)
return highest_mode;
}
+static drmModeModeInfo *get_next_mode(igt_output_t *output)
+{
+ drmModeConnector *connector = output->config.connector;
+ drmModeModeInfo *next_mode = NULL;
+
+ for (int i = count; i < connector->count_modes; i++) {
+ next_mode = &connector->modes[i];
+ count ++;
+ break;
+ }
+
+ return next_mode;
+}
+
static bool check_dsc_on_connector(data_t *data)
{
igt_output_t *output = data->output;
@@ -167,6 +224,19 @@ static bool check_dsc_on_connector(data_t *data)
return true;
}
+static bool is_dsc_ycbcr420_supported(data_t *data)
+{
+ igt_output_t *output = data->output;
+
+ if (!igt_is_dsc_ycbcr420_supported(data->drm_fd, output->name)) {
+ igt_debug("DSC YCbCr420 not supported on connector %s\n",
+ output->name);
+ return false;
+ }
+
+ return true;
+}
+
static bool check_big_joiner_pipe_constraint(data_t *data)
{
igt_output_t *output = data->output;
@@ -224,75 +294,100 @@ static void test_cleanup(data_t *data)
/* re-probe connectors and do a modeset with DSC */
static void update_display(data_t *data, enum dsc_test_type test_type,
- unsigned int plane_format)
+ unsigned int plane_format, enum dsc_output_format output_format)
{
+ int ret;
bool enabled;
igt_plane_t *primary;
drmModeModeInfo *mode;
+ bool test_complete = false;
igt_output_t *output = data->output;
igt_display_t *display = &data->display;
- /* sanitize the state before starting the subtest */
- igt_display_reset(display);
- igt_display_commit(display);
+ count = 0;
+ while (!test_complete) {
+ /* sanitize the state before starting the subtest */
+ igt_display_reset(display);
+ igt_display_commit(display);
- igt_debug("DSC is supported on %s\n", data->output->name);
- save_force_dsc_en(data);
- force_dsc_enable(data);
+ igt_debug("DSC is supported on %s\n", data->output->name);
+ save_force_dsc_en(data);
+ force_dsc_enable(data);
- if (test_type == TEST_DSC_BPC) {
- igt_debug("Trying to set input BPC to %d\n", data->input_bpc);
- force_dsc_enable_bpc(data);
- }
+ if (output_format == DSC_FORMAT_YCBCR420) {
+ igt_debug("DSC YCbCr420 is supported on %s\n", data->output->name);
+ save_force_dsc_ycbcr420_en(data);
+ force_dsc_ycbcr420_enable(data);
+ }
- igt_output_set_pipe(output, data->pipe);
+ if (test_type == TEST_DSC_BPC) {
+ igt_debug("Trying to set input BPC to %d\n", data->input_bpc);
+ force_dsc_enable_bpc(data);
+ }
- mode = get_highres_mode(output);
- igt_require(mode != NULL);
- igt_output_override_mode(output, mode);
+ igt_output_set_pipe(output, data->pipe);
- primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
+ if (output_format == DSC_FORMAT_YCBCR420)
+ mode = get_next_mode(output);
+ else
+ mode = get_highres_mode(output);
- igt_skip_on(!igt_plane_has_format_mod(primary, plane_format,
- DRM_FORMAT_MOD_LINEAR));
+ igt_require(mode != NULL);
+ igt_output_override_mode(output, mode);
- igt_create_pattern_fb(data->drm_fd,
- mode->hdisplay,
- mode->vdisplay,
- plane_format,
- DRM_FORMAT_MOD_LINEAR,
- &data->fb_test_pattern);
+ primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(primary, &data->fb_test_pattern);
- igt_display_commit(display);
+ igt_skip_on(!igt_plane_has_format_mod(primary, plane_format,
+ DRM_FORMAT_MOD_LINEAR));
- /* until we have CRC check support, manually check if RGB test
- * pattern has no corruption.
- */
- manual("RGB test pattern without corruption");
+ igt_create_pattern_fb(data->drm_fd,
+ mode->hdisplay,
+ mode->vdisplay,
+ plane_format,
+ DRM_FORMAT_MOD_LINEAR,
+ &data->fb_test_pattern);
- enabled = igt_is_dsc_enabled(data->drm_fd, output->name);
- igt_info("Current mode is: %dx%d @%dHz -- DSC is: %s\n",
- mode->hdisplay,
- mode->vdisplay,
- mode->vrefresh,
- enabled ? "ON" : "OFF");
+ igt_plane_set_fb(primary, &data->fb_test_pattern);
+ ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+ if (ret == 0) {
+ igt_display_commit(display);
+ test_complete = true;
+ } else if (output_format == DSC_FORMAT_YCBCR420) {
+ continue;
+ }
- restore_force_dsc_en();
- igt_debug("Reset compression BPC\n");
- data->input_bpc = 0;
- force_dsc_enable_bpc(data);
+ igt_assert_eq(ret, 0);
+
+ /* until we have CRC check support, manually check if RGB test
+ * pattern has no corruption.
+ */
+ manual("RGB test pattern without corruption");
+
+ enabled = igt_is_dsc_enabled(data->drm_fd, output->name);
+ igt_info("Current mode is: %dx%d @%dHz -- DSC is: %s\n",
+ mode->hdisplay,
+ mode->vdisplay,
+ mode->vrefresh,
+ enabled ? "ON" : "OFF");
+
+ restore_force_dsc_en();
+ if (output_format == DSC_FORMAT_YCBCR420)
+ restore_force_dsc_ycbcr420_en();
+ igt_debug("Reset compression BPC\n");
+ data->input_bpc = 0;
+ force_dsc_enable_bpc(data);
- igt_assert_f(enabled,
- "Default DSC enable failed on connector: %s pipe: %s\n",
- output->name,
- kmstest_pipe_name(data->pipe));
+ igt_assert_f(enabled,
+ "Default DSC enable failed on connector: %s pipe: %s\n",
+ output->name,
+ kmstest_pipe_name(data->pipe));
- test_cleanup(data);
+ test_cleanup(data);
+ }
}
static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
- unsigned int plane_format)
+ unsigned int plane_format, enum dsc_output_format output_format)
{
igt_display_t *display = &data->display;
igt_output_t *output;
@@ -322,14 +417,18 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
snprintf(name, sizeof(name), "-%s", igt_format_str(plane_format));
igt_dynamic_f("pipe-%s-%s%s", kmstest_pipe_name(data->pipe), data->output->name, name)
- update_display(data, test_type, plane_format);
+ update_display(data, test_type, plane_format, output_format);
}
}
static void run_test(data_t *data, enum dsc_test_type test_type, int bpc,
unsigned int plane_format)
{
- test_dsc(data, test_type, bpc, plane_format);
+ test_dsc(data, test_type, bpc, plane_format, DSC_FORMAT_RGB444);
+
+ /* YCbCr420 DSC is supported on display version 14+ */
+ if ((data->disp_ver >= 14) && (is_dsc_ycbcr420_supported(data)))
+ test_dsc(data, test_type, bpc, plane_format, DSC_FORMAT_YCBCR420);
}
igt_main
--
2.25.1
More information about the igt-dev
mailing list