[igt-dev] [PATCH i-g-t 4/7] tests/kms_color: Ctm MPO + pipe color test
Ananya Sharma
ananya.sharma at intel.com
Mon Oct 10 07:47:44 UTC 2022
MPO + pipe color test for ctm transformation.
Signed-off-by: Ananya Sharma <ananya.sharma at intel.com>
---
tests/kms_color.c | 169 ++++++++++++++++++++++++++++++++++------------
1 file changed, 126 insertions(+), 43 deletions(-)
diff --git a/tests/kms_color.c b/tests/kms_color.c
index e68f4dce..bc836d56 100644
--- a/tests/kms_color.c
+++ b/tests/kms_color.c
@@ -535,6 +535,7 @@ end:
*/
static bool test_pipe_ctm(data_t *data,
igt_plane_t *primary,
+ bool multiplane,
color_t *before,
color_t *after,
double *ctm_matrix)
@@ -544,14 +545,17 @@ static bool test_pipe_ctm(data_t *data,
0.0, 1.0, 0.0,
0.0, 0.0, 1.0
};
+ igt_plane_t *overlay = data->overlay;
gamma_lut_t *degamma_linear, *gamma_linear;
igt_output_t *output = data->output;
bool ret = true;
igt_display_t *display = &data->display;
drmModeModeInfo *mode = data->mode;
- struct igt_fb fb_modeset, fb;
+ struct igt_fb fb0, fb1;
igt_crc_t crc_software, crc_hardware;
- int fb_id, fb_modeset_id;
+ int fb_id0, fb_id1;
+ int primary_x, primary_y, primary_h, primary_w;
+ int overlay_x, overlay_y, overlay_h, overlay_w;
igt_require(igt_pipe_obj_has_prop(primary->pipe, IGT_CRTC_CTM));
@@ -561,23 +565,39 @@ static bool test_pipe_ctm(data_t *data,
igt_output_set_pipe(output, primary->pipe->pipe);
igt_output_override_mode(output, mode);
+ primary_w = mode->hdisplay;
+ primary_h = multiplane ? (mode->vdisplay / 2) : mode->vdisplay;
+ overlay_w = mode->hdisplay;
+ overlay_h = primary_h + (mode->vdisplay % 2);
+ primary_x = 0;
+ primary_y = 0;
+ overlay_x = 0;
+ overlay_y = primary_h;
+
/* Create a framebuffer at the size of the output. */
- fb_id = igt_create_fb(data->drm_fd,
- mode->hdisplay,
- mode->vdisplay,
- data->drm_format,
- DRM_FORMAT_MOD_LINEAR,
- &fb);
- igt_assert(fb_id);
+ fb_id0 = igt_create_fb(data->drm_fd,
+ primary_w,
+ primary_h,
+ data->drm_format,
+ DRM_FORMAT_MOD_LINEAR,
+ &fb0);
+ igt_assert(fb_id0);
- fb_modeset_id = igt_create_fb(data->drm_fd,
- mode->hdisplay,
- mode->vdisplay,
- data->drm_format,
- DRM_FORMAT_MOD_LINEAR,
- &fb_modeset);
- igt_assert(fb_modeset_id);
- igt_plane_set_fb(primary, &fb_modeset);
+ igt_plane_set_fb(primary, &fb0);
+ igt_plane_set_position(primary, primary_x, primary_y);
+
+ if (multiplane) {
+ fb_id1 = igt_create_fb(data->drm_fd,
+ overlay_w,
+ overlay_h,
+ data->drm_format_overlay,
+ DRM_FORMAT_MOD_LINEAR,
+ &fb1);
+ igt_assert(fb_id1);
+
+ igt_plane_set_fb(overlay, &fb1);
+ igt_plane_set_position(overlay, overlay_x, overlay_y);
+ }
/*
* Don't program LUT's for max CTM cases, as limitation of
@@ -594,21 +614,37 @@ static bool test_pipe_ctm(data_t *data,
}
disable_ctm(primary->pipe);
- igt_display_commit(&data->display);
+ igt_display_commit2(&data->display, multiplane ? COMMIT_ATOMIC : COMMIT_LEGACY);
+
+ paint_rectangles(data, primary_h, primary_w, primary_x, primary_y, after, &fb0);
+ igt_plane_set_fb(primary, &fb0);
+ igt_plane_set_position(primary, primary_x, primary_y);
+
+ if (multiplane) {
+ paint_rectangles(data, overlay_h, overlay_w, 0, 0, after, &fb1);
+ igt_plane_set_fb(overlay, &fb1);
+ igt_plane_set_position(overlay, overlay_x, overlay_y);
+ }
- paint_rectangles(data, mode->vdisplay, mode->hdisplay, 0, 0, after, &fb);
- igt_plane_set_fb(primary, &fb);
set_ctm(primary->pipe, ctm_identity);
- igt_display_commit(&data->display);
+ igt_display_commit2(&data->display, multiplane ? COMMIT_ATOMIC : COMMIT_LEGACY);
igt_wait_for_vblank(data->drm_fd,
display->pipes[primary->pipe->pipe].crtc_offset);
igt_pipe_crc_collect_crc(data->pipe_crc, &crc_software);
/* With CTM transformation. */
- paint_rectangles(data, mode->vdisplay, mode->hdisplay, 0, 0, before, &fb);
- igt_plane_set_fb(primary, &fb);
+ paint_rectangles(data, primary_h, primary_w, primary_x, primary_y, before, &fb0);
+ igt_plane_set_fb(primary, &fb0);
+ igt_plane_set_position(primary, primary_x, primary_y);
+
+ if (multiplane) {
+ paint_rectangles(data, overlay_h, overlay_w, 0, 0, before, &fb1);
+ igt_plane_set_fb(overlay, &fb1);
+ igt_plane_set_position(overlay, overlay_x, overlay_y);
+ }
+
set_ctm(primary->pipe, ctm_matrix);
- igt_display_commit(&data->display);
+ igt_display_commit2(&data->display, multiplane ? COMMIT_ATOMIC : COMMIT_LEGACY);
igt_wait_for_vblank(data->drm_fd,
display->pipes[primary->pipe->pipe].crtc_offset);
igt_pipe_crc_collect_crc(data->pipe_crc, &crc_hardware);
@@ -619,11 +655,18 @@ static bool test_pipe_ctm(data_t *data,
*/
ret &= igt_skip_crc_compare || igt_check_crc_equal(&crc_software, &crc_hardware);
+ disable_degamma(primary->pipe);
+ disable_gamma(primary->pipe);
+ disable_ctm(primary->pipe);
+
igt_plane_set_fb(primary, NULL);
+ if (multiplane)
+ igt_plane_set_fb(overlay, NULL);
igt_output_set_pipe(output, PIPE_NONE);
- igt_display_commit(&data->display);
- igt_remove_fb(data->drm_fd, &fb);
- igt_remove_fb(data->drm_fd, &fb_modeset);
+ igt_display_commit2(&data->display, multiplane ? COMMIT_ATOMIC : COMMIT_LEGACY);
+ igt_remove_fb(data->drm_fd, &fb0);
+ if (multiplane)
+ igt_remove_fb(data->drm_fd, &fb1);
free_lut(degamma_linear);
free_lut(gamma_linear);
@@ -814,7 +857,8 @@ run_gamma_degamma_tests_for_pipe(data_t *data, enum pipe p, bool multiplane,
overlay->type == DRM_PLANE_TYPE_CURSOR)
continue;
- if (igt_plane_has_format_mod(overlay, DRM_FORMAT_NV12, DRM_FORMAT_MOD_LINEAR)) {
+ if (igt_plane_has_format_mod(overlay, DRM_FORMAT_NV12,
+ DRM_FORMAT_MOD_LINEAR)) {
count++;
break;
}
@@ -833,10 +877,13 @@ run_gamma_degamma_tests_for_pipe(data_t *data, enum pipe p, bool multiplane,
static void
run_ctm_tests_for_pipe(data_t *data, enum pipe p,
+ bool multiplane,
color_t *expected_colors,
double *ctm,
int iter)
{
+ igt_plane_t *overlay;
+ int count;
double delta;
color_t red_green_blue[] = {
{ 1.0, 0.0, 0.0 },
@@ -855,13 +902,31 @@ run_ctm_tests_for_pipe(data_t *data, enum pipe p,
data->drm_format = DRM_FORMAT_XRGB8888;
data->mode = igt_output_get_mode(data->output);
+ if (multiplane) {
+ for_each_plane_on_pipe(&data->display, p, overlay) {
+ if (overlay->type == DRM_PLANE_TYPE_PRIMARY ||
+ overlay->type == DRM_PLANE_TYPE_CURSOR)
+ continue;
+
+ if (igt_plane_has_format_mod(overlay, DRM_FORMAT_NV12,
+ DRM_FORMAT_MOD_LINEAR)) {
+ count++;
+ break;
+ }
+ }
+ }
+ igt_require_f(count, "No valid planes found.\n");
+
+ data->overlay = overlay;
+ data->drm_format_overlay = DRM_FORMAT_NV12;
+
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(p), data->output->name) {
bool success = false;
int i;
if (!iter)
- success = test_pipe_ctm(data, data->primary, red_green_blue,
- expected_colors, ctm);
+ success = test_pipe_ctm(data, data->primary, multiplane,
+ red_green_blue, expected_colors, ctm);
/*
* We tests a few values around the expected result because
@@ -874,8 +939,8 @@ run_ctm_tests_for_pipe(data_t *data, enum pipe p,
expected_colors[1].g =
expected_colors[2].b =
ctm[0] + delta * (i - (iter / 2));
- if (test_pipe_ctm(data, data->primary, red_green_blue,
- expected_colors, ctm)) {
+ if (test_pipe_ctm(data, data->primary, multiplane,
+ red_green_blue, expected_colors, ctm)) {
success = true;
break;
}
@@ -961,7 +1026,7 @@ run_deep_color_tests_for_pipe(data_t *data, enum pipe p)
igt_display_reset(&data->display);
igt_output_set_prop_value(output, IGT_CONNECTOR_MAX_BPC, 10);
- ret = test_pipe_ctm(data, data->primary,
+ ret = test_pipe_ctm(data, data->primary, false,
red_green_blue,
blue_green_blue, ctm);
@@ -1041,11 +1106,21 @@ run_tests_for_pipe(data_t *data)
struct {
const char *name;
int iter;
+ bool multiplane;
color_t colors[3];
double ctm[9];
const char *desc;
} ctm_tests[] = {
- { "ctm-red-to-blue", 0,
+ { "ctm-multiplane", 0, true,
+ {{ 0.0, 0.0, 1.0 },
+ { 0.0, 1.0, 0.0 },
+ { 0.0, 0.0, 1.0 }},
+ { 0.0, 0.0, 0.0,
+ 0.0, 1.0, 0.0,
+ 1.0, 0.0, 1.0 },
+ "Check the color transformation from red to blue in multiplane "
+ },
+ { "ctm-red-to-blue", 0, false,
{{ 0.0, 0.0, 1.0 },
{ 0.0, 1.0, 0.0 },
{ 0.0, 0.0, 1.0 }},
@@ -1054,7 +1129,7 @@ run_tests_for_pipe(data_t *data)
1.0, 0.0, 1.0 },
"Check the color transformation from red to blue"
},
- { "ctm-green-to-red", 0,
+ { "ctm-green-to-red", 0, false,
{{ 1.0, 0.0, 0.0 },
{ 1.0, 0.0, 0.0 },
{ 0.0, 0.0, 1.0 }},
@@ -1063,7 +1138,7 @@ run_tests_for_pipe(data_t *data)
0.0, 0.0, 1.0 },
"Check the color transformation from green to red"
},
- { "ctm-blue-to-red", 0,
+ { "ctm-blue-to-red", 0, false,
{{ 1.0, 0.0, 0.0 },
{ 0.0, 1.0, 0.0 },
{ 1.0, 0.0, 0.0 }},
@@ -1072,7 +1147,7 @@ run_tests_for_pipe(data_t *data)
0.0, 0.0, 0.0 },
"Check the color transformation from blue to red"
},
- { "ctm-max", 0,
+ { "ctm-max", 0, false,
{{ 1.0, 0.0, 0.0 },
{ 0.0, 1.0, 0.0 },
{ 0.0, 0.0, 1.0 }},
@@ -1081,7 +1156,7 @@ run_tests_for_pipe(data_t *data)
0.0, 0.0, 100.0 },
"Check the color transformation for maximum transparency"
},
- { "ctm-negative", 0,
+ { "ctm-negative", 0, false,
{{ 0.0, 0.0, 0.0 },
{ 0.0, 0.0, 0.0 },
{ 0.0, 0.0, 0.0 }},
@@ -1090,21 +1165,21 @@ run_tests_for_pipe(data_t *data)
0.0, 0.0, -1.0 },
"Check the color transformation for negative transparency"
},
- { "ctm-0-25", 5,
+ { "ctm-0-25", 5, false,
{{ 0.0, }, { 0.0, }, { 0.0, }},
{ 0.25, 0.0, 0.0,
0.0, 0.25, 0.0,
0.0, 0.0, 0.25 },
"Check the color transformation for 0.25 transparency"
},
- { "ctm-0-50", 5,
+ { "ctm-0-50", 5, false,
{{ 0.0, }, { 0.0, }, { 0.0, }},
{ 0.5, 0.0, 0.0,
0.0, 0.5, 0.0,
0.0, 0.0, 0.5 },
"Check the color transformation for 0.5 transparency"
},
- { "ctm-0-75", 7,
+ { "ctm-0-75", 7, false,
{{ 0.0, }, { 0.0, }, { 0.0, }},
{ 0.75, 0.0, 0.0,
0.0, 0.75, 0.0,
@@ -1118,8 +1193,9 @@ run_tests_for_pipe(data_t *data)
igt_describe_f("%s", gamma_degamma_tests[i].desc);
igt_subtest_with_dynamic_f("%s", gamma_degamma_tests[i].name) {
if (gamma_degamma_tests[i].multiplane &&
- (!data->display.is_atomic ||
- !igt_display_has_format_mod(&data->display, DRM_FORMAT_NV12, DRM_FORMAT_MOD_LINEAR)))
+ (!data->display.is_atomic || !igt_display_has_format_mod(&data->display,
+ DRM_FORMAT_NV12,
+ DRM_FORMAT_MOD_LINEAR)))
continue;
for_each_pipe(&data->display, pipe) {
@@ -1133,8 +1209,15 @@ run_tests_for_pipe(data_t *data)
for (i = 0; i < ARRAY_SIZE(ctm_tests); i++) {
igt_describe_f("%s", ctm_tests[i].desc);
igt_subtest_with_dynamic_f("%s", ctm_tests[i].name) {
+ if (ctm_tests[i].multiplane &&
+ (!data->display.is_atomic || !igt_display_has_format_mod(&data->display,
+ DRM_FORMAT_NV12,
+ DRM_FORMAT_MOD_LINEAR)))
+ continue;
+
for_each_pipe(&data->display, pipe) {
run_ctm_tests_for_pipe(data, pipe,
+ ctm_tests[i].multiplane,
ctm_tests[i].colors,
ctm_tests[i].ctm,
ctm_tests[i].iter);
--
2.25.1
More information about the igt-dev
mailing list