[igt-dev] [PATCH i-g-t v2 2/2] tests/kms_atomic: Convert tests to dynamic
Modem, Bhanuprakash
bhanuprakash.modem at intel.com
Tue Oct 18 16:15:43 UTC 2022
On Thu-13-10-2022 11:28 am, Swati Sharma wrote:
> Subtests are converted to dynamic subtests.
> From the fixture for_each_pipe_with_valid_output()
> is removed and put at subtest level to give flexibility to
> user to test all pipes/output combinations. However,
I think, this part is missing in this commit. Maybe we can pass an extra
flag in commandline to run on all pipe/output combinations.
> restricted to 1pipe/1output combination as originally
> written in the test. Code rework is done to accommodate
> above changes
>
> Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
> ---
> tests/kms_atomic.c | 879 ++++++++++++++++++++++++---------------------
> 1 file changed, 464 insertions(+), 415 deletions(-)
>
> diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
> index 535ae2ed7..8c0c4183f 100644
> --- a/tests/kms_atomic.c
> +++ b/tests/kms_atomic.c
> @@ -52,6 +52,15 @@
>
> IGT_TEST_DESCRIPTION("Test atomic modesetting API.");
>
> +/* Common test data. */
> +typedef struct {
> + igt_display_t display;
> + igt_plane_t *primary;
> + igt_pipe_t *pipe;
> + int drm_fd;
> + igt_fb_t fb;
> +} data_t;
> +
> enum kms_atomic_check_relax {
> ATOMIC_RELAX_NONE = 0,
> CRTC_RELAX_MODE = (1 << 0),
> @@ -283,8 +292,8 @@ static uint32_t plane_get_igt_format(igt_plane_t *plane)
> }
>
> static void
> -plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
> - igt_plane_t *primary, igt_plane_t *overlay,
> +plane_primary_overlay_mutable_zpos(data_t *data, igt_output_t *output,
> + igt_plane_t *overlay,
> uint32_t format_primary, uint32_t format_overlay)
> {
> struct igt_fb fb_primary, fb_overlay;
> @@ -299,17 +308,17 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
> uint32_t w_overlay = mode->hdisplay / 2;
> uint32_t h_overlay = mode->vdisplay / 2;
>
> - igt_create_color_pattern_fb(pipe->display->drm_fd,
> + igt_create_color_pattern_fb(data->drm_fd,
> w, h, format_primary, I915_TILING_NONE,
> 0.2, 0.2, 0.2, &fb_primary);
>
> - igt_create_color_pattern_fb(pipe->display->drm_fd,
> + igt_create_color_pattern_fb(data->drm_fd,
> w_overlay, h_overlay,
> format_overlay, I915_TILING_NONE,
> 0.2, 0.2, 0.2, &fb_overlay);
>
> /* Draw a hole in the overlay */
> - cr = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_overlay);
> + cr = igt_get_cairo_ctx(data->drm_fd, &fb_overlay);
> cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
> igt_paint_color_alpha(cr, w_overlay / 4, h_overlay / 4,
> w_overlay / 2, h_overlay / 2,
> @@ -317,33 +326,33 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
> cairo_set_operator(cr, CAIRO_OPERATOR_OVER);
> igt_put_cairo_ctx(cr);
>
> - igt_plane_set_fb(primary, &fb_primary);
> + igt_plane_set_fb(data->primary, &fb_primary);
> igt_plane_set_fb(overlay, &fb_overlay);
>
> igt_plane_set_position(overlay, w_overlay / 2, h_overlay / 2);
>
> - igt_plane_set_prop_value(primary, IGT_PLANE_ZPOS, 0);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_ZPOS, 0);
> igt_plane_set_prop_value(overlay, IGT_PLANE_ZPOS, 1);
>
> igt_info("Committing with overlay on top, it has a hole "\
> "through which the primary should be seen\n");
> - plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> - igt_assert_eq_u64(igt_plane_get_prop(primary, IGT_PLANE_ZPOS), 0);
> + igt_assert_eq_u64(igt_plane_get_prop(data->primary, IGT_PLANE_ZPOS), 0);
> igt_assert_eq_u64(igt_plane_get_prop(overlay, IGT_PLANE_ZPOS), 1);
>
> - igt_plane_set_prop_value(primary, IGT_PLANE_ZPOS, 1);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_ZPOS, 1);
> igt_plane_set_prop_value(overlay, IGT_PLANE_ZPOS, 0);
>
> igt_info("Committing with primary on top, only the primary "\
> "should be visible\n");
> - plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> - igt_assert_eq_u64(igt_plane_get_prop(primary, IGT_PLANE_ZPOS), 1);
> + igt_assert_eq_u64(igt_plane_get_prop(data->primary, IGT_PLANE_ZPOS), 1);
> igt_assert_eq_u64(igt_plane_get_prop(overlay, IGT_PLANE_ZPOS), 0);
>
> /* Draw a hole in the primary exactly on top of the overlay plane */
> - cr = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_primary);
> + cr = igt_get_cairo_ctx(data->drm_fd, &fb_primary);
> cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
> igt_paint_color_alpha(cr, w_overlay / 2, h_overlay / 2,
> w_overlay, h_overlay,
> @@ -353,20 +362,19 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
>
> igt_info("Committing with a hole in the primary through "\
> "which the underlay should be seen\n");
> - plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /* Reset it back to initial state */
> - igt_plane_set_prop_value(primary, IGT_PLANE_ZPOS, 0);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_ZPOS, 0);
> igt_plane_set_prop_value(overlay, IGT_PLANE_ZPOS, 1);
> - plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> - igt_assert_eq_u64(igt_plane_get_prop(primary, IGT_PLANE_ZPOS), 0);
> + igt_assert_eq_u64(igt_plane_get_prop(data->primary, IGT_PLANE_ZPOS), 0);
> igt_assert_eq_u64(igt_plane_get_prop(overlay, IGT_PLANE_ZPOS), 1);
> }
>
> static void
> -plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
> - igt_output_t *output, igt_plane_t *primary, int n_planes)
> +plane_immutable_zpos(data_t *data, igt_output_t *output, enum pipe pipe, int n_planes)
> {
> cairo_t *cr;
> struct igt_fb fb_ref;
> @@ -380,7 +388,7 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
>
> memset(plane_ptr, 0, n_planes * sizeof(igt_plane_t *));
>
> - igt_require_pipe_crc(display->drm_fd);
> + igt_require_pipe_crc(data->drm_fd);
> mode = igt_output_get_mode(output);
>
> /* For lower plane */
> @@ -391,36 +399,36 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
> w_upper = 64;
> h_upper = 64;
>
> - igt_create_color_fb(display->drm_fd,
> + igt_create_color_fb(data->drm_fd,
> w_lower, h_lower,
> DRM_FORMAT_XRGB8888,
> I915_TILING_NONE,
> 0.0, 0.0, 0.0, &fb_ref);
>
> /* Create reference image */
> - cr = igt_get_cairo_ctx(display->drm_fd, &fb_ref);
> + cr = igt_get_cairo_ctx(data->drm_fd, &fb_ref);
> igt_assert(cairo_status(cr) == 0);
> igt_paint_color(cr, 0, 0, w_lower, h_lower, 0.0, 0.0, 1.0);
> igt_paint_color(cr, w_upper / 2, h_upper / 2, w_upper, h_upper, 1.0, 1.0, 0.0);
> igt_put_cairo_ctx(cr);
> - igt_plane_set_fb(primary, &fb_ref);
> - igt_display_commit2(display, COMMIT_ATOMIC);
> + igt_plane_set_fb(data->primary, &fb_ref);
> + igt_display_commit2(&data->display, COMMIT_ATOMIC);
>
> /* Create the pipe_crc object for this pipe */
> - pipe_crc = igt_pipe_crc_new(pipe->display->drm_fd, pipe->pipe,
> + pipe_crc = igt_pipe_crc_new(data->drm_fd, pipe,
> INTEL_PIPE_CRC_SOURCE_AUTO);
>
> /* Get reference crc */
> igt_pipe_crc_start(pipe_crc);
> - igt_pipe_crc_get_current(display->drm_fd, pipe_crc, &ref_crc);
> + igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &ref_crc);
>
> - igt_plane_set_fb(primary, NULL);
> + igt_plane_set_fb(data->primary, NULL);
>
> for (int k = 0; k < n_planes; k++) {
> int zpos;
> igt_plane_t *temp;
>
> - temp = &display->pipes[pipe->pipe].planes[k];
> + temp = &data->display.pipes[pipe].planes[k];
>
> if (!igt_plane_has_prop(temp, IGT_PLANE_ZPOS))
> continue;
> @@ -431,14 +439,14 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
> plane_ptr[zpos] = temp;
> }
>
> - fb_id_lower = igt_create_color_fb(display->drm_fd,
> + fb_id_lower = igt_create_color_fb(data->drm_fd,
> w_lower, h_lower,
> DRM_FORMAT_XRGB8888,
> I915_TILING_NONE,
> 0.0, 0.0, 1.0, &fb_lower);
> igt_assert(fb_id_lower);
>
> - fb_id_upper = igt_create_color_fb(display->drm_fd,
> + fb_id_upper = igt_create_color_fb(data->drm_fd,
> w_upper, h_upper,
> DRM_FORMAT_XRGB8888,
> I915_TILING_NONE,
> @@ -481,8 +489,8 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
>
> igt_info("Committing with the plane[%d] underneath "\
> "plane[%d]\n", i, (i + 1));
> - igt_display_commit2(display, COMMIT_ATOMIC);
> - igt_pipe_crc_get_current(pipe->display->drm_fd, pipe_crc, &new_crc);
> + igt_display_commit2(&data->display, COMMIT_ATOMIC);
> + igt_pipe_crc_get_current(data->drm_fd, pipe_crc, &new_crc);
>
> igt_assert_crc_equal(&ref_crc, &new_crc);
>
> @@ -490,22 +498,20 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
> igt_plane_set_fb(plane_upper, NULL);
> }
>
> - igt_remove_fb(display->drm_fd, &fb_ref);
> - igt_remove_fb(display->drm_fd, &fb_lower);
> - igt_remove_fb(display->drm_fd, &fb_upper);
> + igt_remove_fb(data->drm_fd, &fb_ref);
> + igt_remove_fb(data->drm_fd, &fb_lower);
> + igt_remove_fb(data->drm_fd, &fb_upper);
> }
>
> -static void plane_overlay(igt_pipe_t *pipe, igt_output_t *output, igt_plane_t *plane)
> +static void plane_overlay(data_t *data, igt_output_t *output, igt_plane_t *plane,
> + uint32_t format)
> {
> - drmModeModeInfo *mode = igt_output_get_mode(output);
> - uint32_t format = plane_get_igt_format(plane);
> struct igt_fb fb;
> + drmModeModeInfo *mode = igt_output_get_mode(output);
> uint32_t w = mode->hdisplay / 2;
> uint32_t h = mode->vdisplay / 2;
>
> - igt_require(format != 0);
> -
> - igt_create_pattern_fb(pipe->display->drm_fd, w, h,
> + igt_create_pattern_fb(data->drm_fd, w, h,
> format, I915_TILING_NONE, &fb);
>
> igt_plane_set_fb(plane, &fb);
> @@ -538,106 +544,103 @@ static void plane_overlay(igt_pipe_t *pipe, igt_output_t *output, igt_plane_t *p
> igt_plane_set_position(plane, 0, 0);
> plane_commit(plane, COMMIT_LEGACY, ATOMIC_RELAX_NONE);
>
> - igt_remove_fb(pipe->display->drm_fd, &fb);
> + igt_remove_fb(data->drm_fd, &fb);
> }
>
> -static void plane_primary(igt_pipe_t *pipe, igt_plane_t *plane, struct igt_fb *fb)
> +static void plane_primary(data_t *data)
> {
> struct igt_fb fb2;
>
> - igt_create_color_pattern_fb(pipe->display->drm_fd,
> - fb->width, fb->height,
> - fb->drm_format, I915_TILING_NONE,
> + igt_create_color_pattern_fb(data->drm_fd,
> + data->fb.width, data->fb.height,
> + data->fb.drm_format, I915_TILING_NONE,
> 0.2, 0.2, 0.2, &fb2);
>
> /*
> * Flip the primary plane using the atomic API, and double-check
> * state is what we think it should be.
> */
> - igt_plane_set_fb(plane, &fb2);
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_plane_set_fb(data->primary, &fb2);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /* Restore the primary plane and check the state matches the old. */
> - igt_plane_set_fb(plane, fb);
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_plane_set_fb(data->primary, &data->fb);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /*
> * Set the plane through the legacy CRTC/primary-plane API, and
> * verify through atomic.
> */
> - igt_plane_set_fb(plane, &fb2);
> - crtc_commit(pipe, plane, COMMIT_LEGACY, CRTC_RELAX_MODE);
> + igt_plane_set_fb(data->primary, &fb2);
> + crtc_commit(data->pipe, data->primary, COMMIT_LEGACY, CRTC_RELAX_MODE);
>
> /*
> * Restore the plane to its original settings through the legacy CRTC
> * API, and verify through atomic.
> */
> - igt_plane_set_fb(plane, fb);
> - crtc_commit(pipe, plane, COMMIT_LEGACY, CRTC_RELAX_MODE);
> + igt_plane_set_fb(data->primary, &data->fb);
> + crtc_commit(data->pipe, data->primary, COMMIT_LEGACY, CRTC_RELAX_MODE);
>
> /*
> * Set the plane through the universal setplane API, and
> * verify through atomic.
> */
> - igt_plane_set_fb(plane, &fb2);
> - plane_commit(plane, COMMIT_UNIVERSAL, ATOMIC_RELAX_NONE);
> + igt_plane_set_fb(data->primary, &fb2);
> + plane_commit(data->primary, COMMIT_UNIVERSAL, ATOMIC_RELAX_NONE);
> }
>
> -static void test_only(igt_pipe_t *pipe_obj, igt_plane_t *primary,
> - igt_output_t *output, uint32_t format)
> +static void test_only(data_t *data, igt_output_t *output, enum pipe pipe, uint32_t format)
> {
> - drmModeModeInfo *mode = igt_output_get_mode(output);
> struct igt_fb fb;
> uint64_t old_plane_values[IGT_NUM_PLANE_PROPS], old_crtc_values[IGT_NUM_CRTC_PROPS];
> + drmModeModeInfo *mode = igt_output_get_mode(output);
>
> - plane_get_current_state(primary, old_plane_values);
> - crtc_get_current_state(pipe_obj, old_crtc_values);
> + plane_get_current_state(data->primary, old_plane_values);
> + crtc_get_current_state(data->pipe, old_crtc_values);
>
> igt_assert(!old_crtc_values[IGT_CRTC_MODE_ID]);
>
> - igt_create_pattern_fb(pipe_obj->display->drm_fd,
> - mode->hdisplay, mode->vdisplay,
> - format, I915_TILING_NONE, &fb);
> - igt_plane_set_fb(primary, &fb);
> - igt_output_set_pipe(output, pipe_obj->pipe);
> + igt_create_pattern_fb(data->drm_fd,
> + mode->hdisplay, mode->vdisplay,
> + format, I915_TILING_NONE, &fb);
> + igt_plane_set_fb(data->primary, &fb);
> + igt_output_set_pipe(output, pipe);
>
> - igt_display_commit_atomic(pipe_obj->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> + igt_display_commit_atomic(&data->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
>
> /* Check the state, should still be old state */
> - crtc_check_current_state(pipe_obj, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
> - plane_check_current_state(primary, old_plane_values, ATOMIC_RELAX_NONE);
> + crtc_check_current_state(data->pipe, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
> + plane_check_current_state(data->primary, old_plane_values, ATOMIC_RELAX_NONE);
>
> /*
> * Enable the plane through the legacy CRTC/primary-plane API, and
> * verify through atomic.
> */
> - crtc_commit(pipe_obj, primary, COMMIT_LEGACY, CRTC_RELAX_MODE);
> + crtc_commit(data->pipe, data->primary, COMMIT_LEGACY, CRTC_RELAX_MODE);
>
> /* Same for disable.. */
> - plane_get_current_state(primary, old_plane_values);
> - crtc_get_current_state(pipe_obj, old_crtc_values);
> + plane_get_current_state(data->primary, old_plane_values);
> + crtc_get_current_state(data->pipe, old_crtc_values);
>
> - igt_plane_set_fb(primary, NULL);
> + igt_plane_set_fb(data->primary, NULL);
> igt_output_set_pipe(output, PIPE_NONE);
>
> - igt_display_commit_atomic(pipe_obj->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> + igt_display_commit_atomic(&data->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
>
> /* For extra stress, go through dpms off/on cycle */
> kmstest_set_connector_dpms(output->display->drm_fd, output->config.connector, DRM_MODE_DPMS_OFF);
> kmstest_set_connector_dpms(output->display->drm_fd, output->config.connector, DRM_MODE_DPMS_ON);
>
> /* Check the state, should still be old state */
> - crtc_check_current_state(pipe_obj, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
> - plane_check_current_state(primary, old_plane_values, ATOMIC_RELAX_NONE);
> + crtc_check_current_state(data->pipe, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
> + plane_check_current_state(data->primary, old_plane_values, ATOMIC_RELAX_NONE);
>
> /* And disable the pipe and remove fb, test complete */
> - crtc_commit(pipe_obj, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> - igt_remove_fb(pipe_obj->display->drm_fd, &fb);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_remove_fb(data->drm_fd, &fb);
> }
>
> -static void plane_cursor(igt_pipe_t *pipe_obj,
> - igt_output_t *output,
> - igt_plane_t *cursor)
> +static void plane_cursor(data_t *data, igt_output_t *output, igt_plane_t *cursor)
> {
> drmModeModeInfo *mode = igt_output_get_mode(output);
> struct igt_fb fb;
> @@ -646,12 +649,12 @@ static void plane_cursor(igt_pipe_t *pipe_obj,
> int y = mode->vdisplay / 2;
>
> /* Any kernel new enough for atomic, also has the cursor size caps. */
> - do_or_die(drmGetCap(pipe_obj->display->drm_fd,
> + do_or_die(drmGetCap(data->drm_fd,
> DRM_CAP_CURSOR_WIDTH, &width));
> - do_or_die(drmGetCap(pipe_obj->display->drm_fd,
> + do_or_die(drmGetCap(data->drm_fd,
> DRM_CAP_CURSOR_HEIGHT, &height));
>
> - igt_create_color_fb(pipe_obj->display->drm_fd,
> + igt_create_color_fb(data->drm_fd,
> width, height, DRM_FORMAT_ARGB8888,
> DRM_FORMAT_MOD_LINEAR,
> 0.0, 0.0, 0.0, &fb);
> @@ -690,69 +693,64 @@ static void plane_cursor(igt_pipe_t *pipe_obj,
> plane_commit(cursor, COMMIT_LEGACY, ATOMIC_RELAX_NONE);
> }
>
> -static void plane_invalid_params(igt_pipe_t *pipe,
> - igt_output_t *output,
> - igt_plane_t *plane,
> - struct igt_fb *fb)
> +static void plane_invalid_params(data_t *data, igt_output_t *output)
> {
> struct igt_fb fb2;
>
> /* Pass a series of invalid object IDs for the FB ID */
> - igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, plane->drm_plane->plane_id);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, data->primary->drm_plane->plane_id);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, pipe->crtc_id);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, data->pipe->crtc_id);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, output->id);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, output->id);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, pipe->values[IGT_CRTC_MODE_ID]);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, data->pipe->values[IGT_CRTC_MODE_ID]);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> /* Valid, but invalid because CRTC_ID is set */
> - igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, 0);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, 0);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_plane_set_fb(plane, fb);
> - plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_plane_set_fb(data->primary, &data->fb);
> + plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /* Pass a series of invalid object IDs for the CRTC ID */
> - igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, plane->drm_plane->plane_id);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, data->primary->drm_plane->plane_id);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, fb->fb_id);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, data->fb.fb_id);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, output->id);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, output->id);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, pipe->values[IGT_CRTC_MODE_ID]);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, data->pipe->values[IGT_CRTC_MODE_ID]);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> /* Valid, but invalid because FB_ID is set */
> - igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, 0);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, 0);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_plane_set_fb(plane, fb);
> - plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_plane_set_fb(data->primary, &data->fb);
> + plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /* Create a framebuffer too small for the plane configuration */
> - igt_create_pattern_fb(pipe->display->drm_fd,
> - fb->width - 1, fb->height - 1,
> - fb->drm_format, I915_TILING_NONE, &fb2);
> + igt_create_pattern_fb(data->drm_fd,
> + data->fb.width - 1, data->fb.height - 1,
> + data->fb.drm_format, I915_TILING_NONE, &fb2);
>
> - igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, fb2.fb_id);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, ENOSPC);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_FB_ID, fb2.fb_id);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, ENOSPC);
>
> /* Restore the primary plane and check the state matches the old */
> - igt_plane_set_fb(plane, fb);
> - plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_plane_set_fb(data->primary, &data->fb);
> + plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> }
>
> -static void plane_invalid_params_fence(igt_pipe_t *pipe,
> - igt_output_t *output,
> - igt_plane_t *plane)
> +static void plane_invalid_params_fence(data_t *data, igt_output_t *output)
> {
> int timeline, fence_fd;
>
> @@ -761,80 +759,73 @@ static void plane_invalid_params_fence(igt_pipe_t *pipe,
> timeline = sw_sync_timeline_create();
>
> /* Invalid fence fd */
> - igt_plane_set_fence_fd(plane, pipe->display->drm_fd);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_fence_fd(data->primary, data->drm_fd);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> /* Valid fence_fd but invalid CRTC */
> fence_fd = sw_sync_timeline_create_fence(timeline, 1);
>
> - igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, ~0);
> - igt_plane_set_fence_fd(plane, fence_fd);
> - plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, ~0);
> + igt_plane_set_fence_fd(data->primary, fence_fd);
> + plane_commit_atomic_err(data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> sw_sync_timeline_inc(timeline, 1);
> - igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, pipe->crtc_id);
> - plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_plane_set_prop_value(data->primary, IGT_PLANE_CRTC_ID, data->pipe->crtc_id);
> + plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> close(fence_fd);
> close(timeline);
> }
>
> -static void crtc_invalid_params(igt_pipe_t *pipe,
> - igt_output_t *output,
> - igt_plane_t *plane,
> - struct igt_fb *fb)
> +static void crtc_invalid_params(data_t *data, igt_output_t *output)
> {
> - uint64_t old_mode_id = pipe->values[IGT_CRTC_MODE_ID];
> + uint64_t old_mode_id = data->pipe->values[IGT_CRTC_MODE_ID];
> drmModeModeInfo *mode = igt_output_get_mode(output);
>
> /* Pass a series of invalid object IDs for the mode ID */
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, plane->drm_plane->plane_id);
> - crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, data->primary->drm_plane->plane_id);
> + crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, pipe->crtc_id);
> - crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, data->pipe->crtc_id);
> + crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, output->id);
> - crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, output->id);
> + crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, fb->fb_id);
> - crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, data->fb.fb_id);
> + crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> /* Can we restore mode? */
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, old_mode_id);
> - crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_ATOMIC_TEST_ONLY, ATOMIC_RELAX_NONE, 0);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, old_mode_id);
> + crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_ATOMIC_TEST_ONLY, ATOMIC_RELAX_NONE, 0);
>
> /*
> * TEST_ONLY cannot be combined with DRM_MODE_PAGE_FLIP_EVENT,
> * but DRM_MODE_PAGE_FLIP_EVENT will always generate EINVAL
> * without valid crtc, so test it here.
> */
> - crtc_commit_atomic_flags_err(pipe, plane,
> + crtc_commit_atomic_flags_err(data->pipe, data->primary,
> DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_PAGE_FLIP_EVENT,
> ATOMIC_RELAX_NONE, EINVAL);
>
> /* Create a blob which is the wrong size to be a valid mode */
> - igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode) - 1);
> - crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
> -
> - igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode) + 1);
> - crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
> + igt_pipe_obj_replace_prop_blob(data->pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode) - 1);
> + crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> + igt_pipe_obj_replace_prop_blob(data->pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode) + 1);
> + crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EINVAL);
>
> /* Restore the CRTC and check the state matches the old */
> - igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode));
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_pipe_obj_replace_prop_blob(data->pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode));
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> }
>
> -static void crtc_invalid_params_fence(igt_pipe_t *pipe,
> - igt_output_t *output,
> - igt_plane_t *plane,
> - struct igt_fb *fb)
> +static void crtc_invalid_params_fence(data_t *data, igt_output_t *output)
> {
> int timeline, fence_fd;
> void *map;
> const ptrdiff_t PAGE_SIZE = sysconf(_SC_PAGE_SIZE);
> - uint64_t old_mode_id = pipe->values[IGT_CRTC_MODE_ID];
> + uint64_t old_mode_id = data->pipe->values[IGT_CRTC_MODE_ID];
>
> igt_require_sw_sync();
>
> @@ -844,94 +835,90 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
> map = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
> igt_assert(map != MAP_FAILED);
>
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
> - crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EFAULT);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
> + crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EFAULT);
> munmap(map, PAGE_SIZE);
>
> /* Invalid out_fence_ptr */
> map = mmap(NULL, PAGE_SIZE, PROT_EXEC, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
> igt_assert(map != MAP_FAILED);
>
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
> - crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EFAULT);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
> + crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EFAULT);
> munmap(map, PAGE_SIZE);
>
> /* Invalid out_fence_ptr */
> map = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
> igt_assert(map != MAP_FAILED);
>
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
> - crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EFAULT);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_OUT_FENCE_PTR, (ptrdiff_t)map);
> + crtc_commit_atomic_err(data->pipe, data->primary, ATOMIC_RELAX_NONE, EFAULT);
> munmap(map, PAGE_SIZE);
>
> /* Valid in fence but not allowed prop on crtc */
> fence_fd = sw_sync_timeline_create_fence(timeline, 1);
> - igt_plane_set_fence_fd(plane, fence_fd);
> + igt_plane_set_fence_fd(data->primary, fence_fd);
>
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_ACTIVE, 0);
> - igt_pipe_obj_clear_prop_changed(pipe, IGT_CRTC_OUT_FENCE_PTR);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_ACTIVE, 0);
> + igt_pipe_obj_clear_prop_changed(data->pipe, IGT_CRTC_OUT_FENCE_PTR);
>
> - crtc_commit_atomic_flags_err(pipe, plane, 0, ATOMIC_RELAX_NONE, EINVAL);
> + crtc_commit_atomic_flags_err(data->pipe, data->primary, 0, ATOMIC_RELAX_NONE, EINVAL);
>
> /* Valid out fence ptr and flip event but not allowed prop on crtc */
> - igt_pipe_request_out_fence(pipe);
> - crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
> + igt_pipe_request_out_fence(data->pipe);
> + crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_PAGE_FLIP_EVENT,
> ATOMIC_RELAX_NONE, EINVAL);
>
> /* Valid flip event but not allowed prop on crtc */
> - igt_pipe_obj_clear_prop_changed(pipe, IGT_CRTC_OUT_FENCE_PTR);
> - crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
> + igt_pipe_obj_clear_prop_changed(data->pipe, IGT_CRTC_OUT_FENCE_PTR);
> + crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_PAGE_FLIP_EVENT,
> ATOMIC_RELAX_NONE, EINVAL);
>
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_ACTIVE, 1);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_ACTIVE, 1);
>
> /* Configuration should be valid again */
> - crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_ATOMIC_TEST_ONLY,
> + crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_ATOMIC_TEST_ONLY,
> ATOMIC_RELAX_NONE, 0);
>
> /* Set invalid prop */
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, fb->fb_id);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, data->fb.fb_id);
>
> /* Valid out fence but invalid prop on crtc */
> - igt_pipe_request_out_fence(pipe);
> - crtc_commit_atomic_flags_err(pipe, plane, 0,
> + igt_pipe_request_out_fence(data->pipe);
> + crtc_commit_atomic_flags_err(data->pipe, data->primary, 0,
> ATOMIC_RELAX_NONE, EINVAL);
>
> /* Valid out fence ptr and flip event but invalid prop on crtc */
> - crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
> + crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_PAGE_FLIP_EVENT,
> ATOMIC_RELAX_NONE, EINVAL);
>
> /* Valid page flip event but invalid prop on crtc */
> - crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
> + crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_PAGE_FLIP_EVENT,
> ATOMIC_RELAX_NONE, EINVAL);
>
> /* Successful TEST_ONLY with fences set */
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, old_mode_id);
> - crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_ATOMIC_TEST_ONLY,
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_MODE_ID, old_mode_id);
> + crtc_commit_atomic_flags_err(data->pipe, data->primary, DRM_MODE_ATOMIC_TEST_ONLY,
> ATOMIC_RELAX_NONE, 0);
> - igt_assert(pipe->out_fence_fd == -1);
> + igt_assert(data->pipe->out_fence_fd == -1);
> close(fence_fd);
> close(timeline);
>
> /* Reset fences */
> - igt_plane_set_fence_fd(plane, -1);
> - igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, 0);
> - igt_pipe_obj_clear_prop_changed(pipe, IGT_CRTC_OUT_FENCE_PTR);
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_plane_set_fence_fd(data->primary, -1);
> + igt_pipe_obj_set_prop_value(data->pipe, IGT_CRTC_OUT_FENCE_PTR, 0);
> + igt_pipe_obj_clear_prop_changed(data->pipe, IGT_CRTC_OUT_FENCE_PTR);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /* Out fence ptr but not page flip event */
> - igt_pipe_request_out_fence(pipe);
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_pipe_request_out_fence(data->pipe);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> - igt_assert(pipe->out_fence_fd != -1);
> + igt_assert(data->pipe->out_fence_fd != -1);
> }
>
> -static void atomic_invalid_params(igt_pipe_t *pipe,
> - igt_plane_t *plane,
> - igt_output_t *output,
> - struct igt_fb *fb)
> +static void atomic_invalid_params(data_t *data, igt_output_t *output)
> {
> - igt_display_t *display = pipe->display;
> struct drm_mode_atomic ioc;
> uint32_t obj_raw[16]; /* Array of objects (sized by count_objs) */
> uint32_t num_props_raw[16]; /* Array of num props per obj (ditto) */
> @@ -942,7 +929,7 @@ static void atomic_invalid_params(igt_pipe_t *pipe,
> memset(&ioc, 0, sizeof(ioc));
>
> /* An empty request should do nothing */
> - do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> + do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
>
> for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
> obj_raw[i] = 0;
> @@ -959,132 +946,132 @@ static void atomic_invalid_params(igt_pipe_t *pipe,
> ioc.prop_values_ptr = (uintptr_t) values_raw;
>
> /* Valid pointers, but still should copy nothing */
> - do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> + do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
>
> /* Valid noop, but with event set should fail */
> ioc.flags = DRM_MODE_PAGE_FLIP_EVENT;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
>
> /* Nonsense flags */
> ioc.flags = 0xdeadbeef;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
>
> ioc.flags = 0;
> /* Safety check that flags is reset properly */
> - do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> + do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
>
> /* Reserved/MBZ */
> ioc.reserved = 1;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
> ioc.reserved = 0;
> - do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> + do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
>
> /* Zero is not a valid object ID */
> ioc.count_objs = ARRAY_SIZE(obj_raw);
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
>
> /* Invalid object type (not a thing we can set properties on) */
> ioc.count_objs = 1;
> - obj_raw[0] = pipe->values[IGT_CRTC_MODE_ID];
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> - obj_raw[0] = fb->fb_id;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> + obj_raw[0] = data->pipe->values[IGT_CRTC_MODE_ID];
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> + obj_raw[0] = data->fb.fb_id;
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
>
> /* Filled object but with no properties; no-op */
> for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
> - obj_raw[i] = pipe->crtc_id;
> - do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> + obj_raw[i] = data->pipe->crtc_id;
> + do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
>
> /* Pass in all sorts of things other than the property ID */
> num_props_raw[0] = 1;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> - props_raw[0] = pipe->crtc_id;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> - props_raw[0] = plane->drm_plane->plane_id;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> + props_raw[0] = data->pipe->crtc_id;
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> + props_raw[0] = data->primary->drm_plane->plane_id;
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> props_raw[0] = output->id;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> - props_raw[0] = pipe->values[IGT_CRTC_MODE_ID];
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> + props_raw[0] = data->pipe->values[IGT_CRTC_MODE_ID];
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
>
> /* Valid property, valid value */
> for (i = 0; i < ARRAY_SIZE(props_raw); i++) {
> - props_raw[i] = pipe->props[IGT_CRTC_MODE_ID];
> - values_raw[i] = pipe->values[IGT_CRTC_MODE_ID];
> + props_raw[i] = data->pipe->props[IGT_CRTC_MODE_ID];
> + values_raw[i] = data->pipe->values[IGT_CRTC_MODE_ID];
> }
> - do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> + do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
>
> /* Setting the same thing multiple times is OK */
> for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
> num_props_raw[i] = ARRAY_SIZE(props_raw) / ARRAY_SIZE(obj_raw);
> - do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> + do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> ioc.count_objs = ARRAY_SIZE(obj_raw);
> - do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> + do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
>
> /* Pass a series of outlandish addresses */
> ioc.objs_ptr = 0;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
>
> ioc.objs_ptr = (uintptr_t) obj_raw;
> ioc.count_props_ptr = 0;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
>
> ioc.count_props_ptr = (uintptr_t) num_props_raw;
> ioc.props_ptr = 0;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
>
> ioc.props_ptr = (uintptr_t) props_raw;
> ioc.prop_values_ptr = 0;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
>
> ioc.prop_values_ptr = (uintptr_t) values_raw;
> - do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
> + do_ioctl(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
>
> /* Attempt to overflow and/or trip various boundary conditions */
> ioc.count_objs = UINT32_MAX / sizeof(uint32_t);
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
>
> ioc.count_objs = ARRAY_SIZE(obj_raw);
> ioc.objs_ptr = UINT64_MAX - sizeof(uint32_t);
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> ioc.count_objs = 1;
> ioc.objs_ptr = UINT64_MAX - sizeof(uint32_t);
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
>
> num_props_raw[0] = UINT32_MAX / sizeof(uint32_t);
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> num_props_raw[0] = UINT32_MAX - 1;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
>
> for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
> num_props_raw[i] = (UINT32_MAX / ARRAY_SIZE(obj_raw)) + 1;
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
> num_props_raw[i] = ARRAY_SIZE(props_raw) / ARRAY_SIZE(obj_raw);
> - do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> + do_ioctl_err(data->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
> }
>
> -static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt_fb *fb)
> +static void atomic_plane_damage(data_t *data)
> {
> struct drm_mode_rect damage[2];
> struct igt_fb fb_1, fb_2;
> cairo_t *cr_1, *cr_2;
>
> /* Color fb with white rect at center */
> - igt_create_color_fb(pipe->display->drm_fd, fb->width, fb->height,
> - fb->drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
> + igt_create_color_fb(data->drm_fd, data->fb.width, data->fb.height,
> + data->fb.drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
> &fb_1);
> - cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
> - igt_paint_color(cr_1, fb->width/4, fb->height/4, fb->width/2,
> - fb->height/2, 1.0, 1.0, 1.0);
> + cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
> + igt_paint_color(cr_1, data->fb.width/4, data->fb.height/4, data->fb.width/2,
> + data->fb.height/2, 1.0, 1.0, 1.0);
> igt_put_cairo_ctx(cr_1);
>
> /*
> * Flip the primary plane to new color fb using atomic API and check the
> * state.
> */
> - igt_plane_set_fb(plane, &fb_1);
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_plane_set_fb(data->primary, &fb_1);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /*
> * Change the color of top left clip from center and issue plane update
> @@ -1092,35 +1079,35 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
> */
> damage[0].x1 = 0;
> damage[0].y1 = 0;
> - damage[0].x2 = fb->width/2;
> - damage[0].y2 = fb->height/2;
> + damage[0].x2 = data->fb.width/2;
> + damage[0].y2 = data->fb.height/2;
>
> - cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
> + cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
> igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
> damage_rect_width(&damage[0]),
> damage_rect_height(&damage[0]), 1.0, 0, 0);
> igt_put_cairo_ctx(cr_1);
>
> - igt_plane_set_fb(plane, &fb_1);
> - igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> + igt_plane_set_fb(data->primary, &fb_1);
> + igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> sizeof(*damage));
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /*
> * Change the color of top left and bottom right clip from center and
> * issue plane update with damage and verify the state.
> */
> - igt_create_color_fb(pipe->display->drm_fd, fb->width, fb->height,
> - fb->drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
> + igt_create_color_fb(data->drm_fd, data->fb.width, data->fb.height,
> + data->fb.drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
> &fb_2);
>
> - damage[0].x1 = fb->width/2;
> + damage[0].x1 = data->fb.width/2;
> damage[0].y1 = 0;
> - damage[0].x2 = fb->width;
> - damage[0].y2 = fb->height/2;
> + damage[0].x2 = data->fb.width;
> + damage[0].y2 = data->fb.height/2;
>
> - cr_2 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_2);
> - cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
> + cr_2 = igt_get_cairo_ctx(data->drm_fd, &fb_2);
> + cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
> cairo_set_source_surface(cr_2, fb_1.cairo_surface, 0, 0);
> cairo_paint(cr_2);
> igt_paint_color(cr_2, damage[0].x1, damage[0].y1,
> @@ -1128,10 +1115,10 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
> damage_rect_height(&damage[0]), 0, 1.0, 0);
> igt_put_cairo_ctx(cr_1);
> igt_put_cairo_ctx(cr_2);
> - igt_plane_set_fb(plane, &fb_2);
> - igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> + igt_plane_set_fb(data->primary, &fb_2);
> + igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> sizeof(*damage));
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /*
> * Issue plane update with damage with a clip outside of plane src.
> @@ -1139,18 +1126,18 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
> * will see no change on the screen.
> */
> /* Resize fb_1 to be bigger than plane */
> - igt_remove_fb(pipe->display->drm_fd, &fb_1);
> - igt_create_color_fb(pipe->display->drm_fd, fb->width * 2, fb->height,
> - fb->drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
> + igt_remove_fb(data->drm_fd, &fb_1);
> + igt_create_color_fb(data->drm_fd, data->fb.width * 2, data->fb.height,
> + data->fb.drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
> &fb_1);
>
> - damage[0].x1 = fb->width;
> + damage[0].x1 = data->fb.width;
> damage[0].y1 = 0;
> - damage[0].x2 = fb->width + fb->width/2;
> - damage[0].y2 = fb->height/2;
> + damage[0].x2 = data->fb.width + data->fb.width/2;
> + damage[0].y2 = data->fb.height/2;
>
> - cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
> - cr_2 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_2);
> + cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
> + cr_2 = igt_get_cairo_ctx(data->drm_fd, &fb_2);
> cairo_set_source_surface(cr_1, fb_2.cairo_surface, 0, 0);
> cairo_paint(cr_1);
> igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
> @@ -1158,13 +1145,13 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
> damage_rect_height(&damage[0]), 0, 1.0, 0);
> igt_put_cairo_ctx(cr_2);
> igt_put_cairo_ctx(cr_1);
> - igt_plane_set_fb(plane, &fb_1);
> - igt_plane_set_size(plane, fb->width, fb->height);
> - igt_fb_set_position(&fb_1, plane, 0, 0);
> - igt_fb_set_size(&fb_1, plane, fb->width, fb->height);
> - igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> + igt_plane_set_fb(data->primary, &fb_1);
> + igt_plane_set_size(data->primary, data->fb.width, data->fb.height);
> + igt_fb_set_position(&fb_1, data->primary, 0, 0);
> + igt_fb_set_size(&fb_1, data->primary, data->fb.width, data->fb.height);
> + igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> sizeof(*damage));
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /*
> * Issue a plane update with damage with a clip that overlap with plane
> @@ -1172,23 +1159,23 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
> * NOTE: Here drm core should take care of intersecting the clip to
> * plane src.
> */
> - damage[0].x1 = fb->width/2;
> + damage[0].x1 = data->fb.width/2;
> damage[0].y1 = 0;
> - damage[0].x2 = fb->width/2 + fb->width;
> - damage[0].y2 = fb->height/2;
> + damage[0].x2 = data->fb.width/2 + data->fb.width;
> + damage[0].y2 = data->fb.height/2;
>
> - cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
> + cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
> igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
> damage_rect_width(&damage[0]),
> damage_rect_height(&damage[0]), 1.0, 1.0, 0);
> igt_put_cairo_ctx(cr_1);
> - igt_plane_set_fb(plane, &fb_1);
> - igt_plane_set_size(plane, fb->width, fb->height);
> - igt_fb_set_position(&fb_1, plane, 0, 0);
> - igt_fb_set_size(&fb_1, plane, fb->width, fb->height);
> - igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> + igt_plane_set_fb(data->primary, &fb_1);
> + igt_plane_set_size(data->primary, data->fb.width, data->fb.height);
> + igt_fb_set_position(&fb_1, data->primary, 0, 0);
> + igt_fb_set_size(&fb_1, data->primary, data->fb.width, data->fb.height);
> + igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> sizeof(*damage));
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /*
> * Issue a plane update with damage with two clips one inside plane src
> @@ -1196,16 +1183,16 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
> * NOTE: This will result in plane update with clip inside plane src.
> */
> damage[0].x1 = 0;
> - damage[0].y1 = fb->height/2;
> - damage[0].x2 = fb->width/2;
> - damage[0].y2 = fb->height;
> + damage[0].y1 = data->fb.height/2;
> + damage[0].x2 = data->fb.width/2;
> + damage[0].y2 = data->fb.height;
>
> - damage[1].x1 = fb->width + fb->width/2;
> - damage[1].y1 = fb->height/2;
> - damage[1].x2 = fb->width * 2;
> - damage[1].y2 = fb->height;
> + damage[1].x1 = data->fb.width + data->fb.width/2;
> + damage[1].y1 = data->fb.height/2;
> + damage[1].x2 = data->fb.width * 2;
> + damage[1].y2 = data->fb.height;
>
> - cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
> + cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
> igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
> damage_rect_width(&damage[0]),
> damage_rect_height(&damage[0]), 0, 1.0, 1.0);
> @@ -1213,13 +1200,13 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
> damage_rect_width(&damage[1]),
> damage_rect_height(&damage[1]), 0, 1.0, 0);
> igt_put_cairo_ctx(cr_1);
> - igt_plane_set_fb(plane, &fb_1);
> - igt_plane_set_size(plane, fb->width, fb->height);
> - igt_fb_set_position(&fb_1, plane, 0, 0);
> - igt_fb_set_size(&fb_1, plane, fb->width, fb->height);
> - igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> + igt_plane_set_fb(data->primary, &fb_1);
> + igt_plane_set_size(data->primary, data->fb.width, data->fb.height);
> + igt_fb_set_position(&fb_1, data->primary, 0, 0);
> + igt_fb_set_size(&fb_1, data->primary, data->fb.width, data->fb.height);
> + igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> sizeof(*damage) * 2);
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /*
> * Issue a plane update with overlapping damage clips. White rect in
> @@ -1230,15 +1217,15 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
> */
> damage[0].x1 = 0;
> damage[0].y1 = 0;
> - damage[0].x2 = fb->width/2;
> - damage[0].y2 = fb->height/2;
> + damage[0].x2 = data->fb.width/2;
> + damage[0].y2 = data->fb.height/2;
>
> - damage[1].x1 = fb->width/4;
> - damage[1].y1 = fb->height/4;
> - damage[1].x2 = fb->width/4 + fb->width/2;
> - damage[1].y2 = fb->height/4 + fb->height/2;
> + damage[1].x1 = data->fb.width/4;
> + damage[1].y1 = data->fb.height/4;
> + damage[1].x2 = data->fb.width/4 + data->fb.width/2;
> + damage[1].y2 = data->fb.height/4 + data->fb.height/2;
>
> - cr_1 = igt_get_cairo_ctx(pipe->display->drm_fd, &fb_1);
> + cr_1 = igt_get_cairo_ctx(data->drm_fd, &fb_1);
> igt_paint_color(cr_1, damage[0].x1, damage[0].y1,
> damage_rect_width(&damage[0]),
> damage_rect_height(&damage[0]), 1.0, 0, 0);
> @@ -1246,45 +1233,55 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
> damage_rect_width(&damage[1]),
> damage_rect_height(&damage[1]), 1.0, 1.0, 1.0);
> igt_put_cairo_ctx(cr_1);
> - igt_plane_set_fb(plane, &fb_1);
> - igt_plane_set_size(plane, fb->width, fb->height);
> - igt_fb_set_position(&fb_1, plane, 0, 0);
> - igt_fb_set_size(&fb_1, plane, fb->width, fb->height);
> - igt_plane_replace_prop_blob(plane, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> + igt_plane_set_fb(data->primary, &fb_1);
> + igt_plane_set_size(data->primary, data->fb.width, data->fb.height);
> + igt_fb_set_position(&fb_1, data->primary, 0, 0);
> + igt_fb_set_size(&fb_1, data->primary, data->fb.width, data->fb.height);
> + igt_plane_replace_prop_blob(data->primary, IGT_PLANE_FB_DAMAGE_CLIPS, damage,
> sizeof(*damage) * 2);
> - crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + crtc_commit(data->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /* Restore the primary plane */
> - igt_plane_set_fb(plane, fb);
> - plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_plane_set_fb(data->primary, &data->fb);
> + plane_commit(data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
>
> /* Remove the fb created for this test */
> - igt_remove_fb(pipe->display->drm_fd, &fb_1);
> - igt_remove_fb(pipe->display->drm_fd, &fb_2);
> + igt_remove_fb(data->drm_fd, &fb_1);
> + igt_remove_fb(data->drm_fd, &fb_2);
> }
>
> -static void atomic_setup(igt_display_t *display, enum pipe pipe, igt_output_t *output,
> - igt_plane_t *primary, struct igt_fb *fb)
> +static void atomic_setup(data_t *data, enum pipe pipe, igt_output_t *output)
> {
> - igt_display_reset(display);
> + drmModeModeInfo *mode;
> + igt_display_reset(&data->display);
> igt_output_set_pipe(output, pipe);
> - igt_plane_set_fb(primary, fb);
>
> - crtc_commit(primary->pipe, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + data->primary = igt_pipe_get_plane_type(&data->display.pipes[pipe], DRM_PLANE_TYPE_PRIMARY);
> + data->pipe = &data->display.pipes[pipe];
> + mode = igt_output_get_mode(output);
> +
> + igt_create_pattern_fb(data->drm_fd,
> + mode->hdisplay, mode->vdisplay,
> + plane_get_igt_format(data->primary),
> + DRM_FORMAT_MOD_LINEAR, &data->fb);
> +
> + igt_plane_set_fb(data->primary, &data->fb);
> +
> + crtc_commit(data->primary->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> }
>
> -static void atomic_clear(igt_display_t *display, enum pipe pipe,
> - igt_plane_t *primary, igt_output_t *output)
> +static void atomic_clear(data_t *data, enum pipe pipe, igt_output_t *output)
> {
> igt_plane_t *plane;
>
> - for_each_plane_on_pipe(display, pipe, plane) {
> + for_each_plane_on_pipe(&data->display, pipe, plane) {
> igt_plane_set_fb(plane, NULL);
> igt_plane_set_position(plane, 0, 0);
> }
>
> igt_output_set_pipe(output, PIPE_NONE);
> - crtc_commit(primary->pipe, primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + crtc_commit(data->primary->pipe, data->primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
> + igt_remove_fb(data->drm_fd, &data->fb);
> }
>
> /* Returns true if plane supports zpos property. */
> @@ -1295,164 +1292,216 @@ static bool has_zpos(igt_plane_t *plane)
>
> igt_main
> {
> - igt_display_t display;
> enum pipe pipe = PIPE_NONE;
> - igt_pipe_t *pipe_obj;
> igt_output_t *output = NULL;
> - igt_plane_t *primary = NULL;
> - drmModeModeInfo *mode;
> - struct igt_fb fb;
> + data_t data = { 0 };
>
> igt_fixture {
> - display.drm_fd = drm_open_driver_master(DRIVER_ANY);
> + data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> kmstest_set_vt_graphics_mode();
> - igt_display_require(&display, display.drm_fd);
> - igt_require(display.is_atomic);
> - igt_display_require_output(&display);
> -
> - for_each_pipe_with_valid_output(&display, pipe, output)
> - break;
> -
> - pipe_obj = &display.pipes[pipe];
> - primary = igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_PRIMARY);
> - mode = igt_output_get_mode(output);
> - igt_create_pattern_fb(display.drm_fd,
> - mode->hdisplay, mode->vdisplay,
> - plane_get_igt_format(primary),
> - DRM_FORMAT_MOD_LINEAR, &fb);
> + igt_display_require(&data.display, data.drm_fd);
> + igt_require(data.display.is_atomic);
> + igt_display_require_output(&data.display);
> }
>
> igt_describe("Test for KMS atomic modesetting on overlay plane and ensure coherency between "
> "the legacy and atomic interfaces.");
> - igt_subtest("plane-overlay-legacy") {
> - igt_plane_t *overlay =
> - igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
> + igt_subtest_with_dynamic("plane-overlay-legacy") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + igt_plane_t *overlay =
> + igt_pipe_get_plane_type(&data.display.pipes[pipe], DRM_PLANE_TYPE_OVERLAY);
> + uint32_t format = plane_get_igt_format(overlay);
>
> - if (!overlay)
> - continue;
> + if (!overlay || !format)
> + continue;
>
> - atomic_setup(&display, pipe, output, primary, &fb);
> - plane_overlay(pipe_obj, output, overlay);
> - atomic_clear(&display, pipe, primary, output);
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_setup(&data, pipe, output);
> + plane_overlay(&data, output, overlay, format);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test for KMS atomic modesetting on primary plane and ensure coherency between "
> "the legacy and atomic interfaces.");
> - igt_subtest("plane-primary-legacy") {
> - atomic_setup(&display, pipe, output, primary, &fb);
> - plane_primary(pipe_obj, primary, &fb);
> - atomic_clear(&display, pipe, primary, output);
> + igt_subtest_with_dynamic("plane-primary-legacy") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_setup(&data, pipe, output);
> + plane_primary(&data);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test to verify that the overlay plane can cover the primary one (and "\
> "vice versa) by changing their zpos property.");
> - igt_subtest("plane-primary-overlay-mutable-zpos") {
> - igt_plane_t *overlay =
> - igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
> + igt_subtest_with_dynamic("plane-primary-overlay-mutable-zpos") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + igt_plane_t *overlay =
> + igt_pipe_get_plane_type(&data.display.pipes[pipe], DRM_PLANE_TYPE_OVERLAY);
>
> - if (!overlay)
> - continue;
> + atomic_setup(&data, pipe, output);
>
> - if (!has_zpos(primary) || !has_zpos(overlay))
> - continue;
> + if (!overlay)
> + continue;
>
> - if (!igt_plane_has_format_mod(primary, DRM_FORMAT_ARGB8888, 0x0) ||
> - !igt_plane_has_format_mod(overlay, DRM_FORMAT_ARGB1555, 0x0))
> - continue;
> + if (!has_zpos(data.primary) || !has_zpos(overlay))
> + continue;
> +
> + if (!igt_plane_has_format_mod(data.primary, DRM_FORMAT_ARGB8888, 0x0) ||
> + !igt_plane_has_format_mod(overlay, DRM_FORMAT_ARGB1555, 0x0))
> + continue;
>
> - igt_output_set_pipe(output, pipe);
> - plane_primary_overlay_mutable_zpos(pipe_obj, output, primary, overlay,
> - DRM_FORMAT_ARGB8888, DRM_FORMAT_ARGB1555);
> - atomic_clear(&display, pipe, primary, output);
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + plane_primary_overlay_mutable_zpos(&data, output, overlay,
> + DRM_FORMAT_ARGB8888, DRM_FORMAT_ARGB1555);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test to verify the reported zpos property of planes by making sure "\
> "only higher zpos planes cover the lower zpos ones.");
> - igt_subtest("plane-immutable-zpos") {
> - int n_planes = pipe_obj->n_planes;
> + igt_subtest_with_dynamic("plane-immutable-zpos") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + int n_planes = data.display.pipes[pipe].n_planes;
>
> - if (n_planes < 2)
> - continue;
> + if (n_planes < 2)
> + continue;
>
> - igt_output_set_pipe(output, pipe);
> - plane_immutable_zpos(&display, pipe_obj, output, primary, n_planes);
> - atomic_clear(&display, pipe, primary, output);
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_setup(&data, pipe, output);
> + plane_immutable_zpos(&data, output, pipe, n_planes);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches "
> "the free-standing state objects and nothing else.");
> - igt_subtest("test-only") {
> - uint32_t format = plane_get_igt_format(primary);
> + igt_subtest_with_dynamic("test-only") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + uint32_t format;
>
> - if (!format)
> - continue;
> + atomic_setup(&data, pipe, output);
> + format = plane_get_igt_format(data.primary);
> +
> + if (!format)
> + continue;
>
> - atomic_clear(&display, pipe, primary, output);
> - test_only(pipe_obj, primary, output, format);
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_clear(&data, pipe, output);
> + test_only(&data, output, pipe, format);
> + }
> + break;
> + }
> }
>
> igt_describe("Test for KMS atomic modesetting on cursor plane and ensure coherency between "
> "legacy and atomic interfaces.");
> - igt_subtest("plane-cursor-legacy") {
> - igt_plane_t *cursor =
> - igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_CURSOR);
> + igt_subtest_with_dynamic("plane-cursor-legacy") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + igt_plane_t *cursor =
> + igt_pipe_get_plane_type(&data.display.pipes[pipe], DRM_PLANE_TYPE_CURSOR);
>
> - if (!cursor)
> - continue;
> + if (!cursor)
> + continue;
>
> - atomic_setup(&display, pipe, output, primary, &fb);
> - plane_cursor(pipe_obj, output, cursor);
> - atomic_clear(&display, pipe, primary, output);
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_setup(&data, pipe, output);
> + plane_cursor(&data, output, cursor);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test error handling when invalid plane parameters are passed.");
> - igt_subtest("plane-invalid-params") {
> - atomic_setup(&display, pipe, output, primary, &fb);
> - plane_invalid_params(pipe_obj, output, primary, &fb);
> - atomic_clear(&display, pipe, primary, output);
> + igt_subtest_with_dynamic("plane-invalid-params") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_setup(&data, pipe, output);
> + plane_invalid_params(&data, output);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test error handling when invalid plane fence parameters are passed.");
> - igt_subtest("plane-invalid-params-fence") {
> - atomic_setup(&display, pipe, output, primary, &fb);
> - plane_invalid_params_fence(pipe_obj, output, primary);
> - atomic_clear(&display, pipe, primary, output);
> + igt_subtest_with_dynamic("plane-invalid-params-fence") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_setup(&data, pipe, output);
> + plane_invalid_params_fence(&data, output);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test error handling when invalid crtc parameters are passed.");
> - igt_subtest("crtc-invalid-params") {
> - atomic_setup(&display, pipe, output, primary, &fb);
> - crtc_invalid_params(pipe_obj, output, primary, &fb);
> - atomic_clear(&display, pipe, primary, output);
> + igt_subtest_with_dynamic("crtc-invalid-params") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_setup(&data, pipe, output);
> + crtc_invalid_params(&data, output);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test error handling when invalid crtc fence parameters are passed.");
> - igt_subtest("crtc-invalid-params-fence") {
> - atomic_setup(&display, pipe, output, primary, &fb);
> - crtc_invalid_params_fence(pipe_obj, output, primary, &fb);
> - atomic_clear(&display, pipe, primary, output);
> + igt_subtest_with_dynamic("crtc-invalid-params-fence") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_setup(&data, pipe, output);
> + crtc_invalid_params_fence(&data, output);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test abuse the atomic ioctl directly in order to test "
> "various invalid conditions which the libdrm wrapper won't "
> "allow us to create.");
> - igt_subtest("atomic-invalid-params") {
> - atomic_setup(&display, pipe, output, primary, &fb);
> - atomic_invalid_params(pipe_obj, primary, output, &fb);
> - atomic_clear(&display, pipe, primary, output);
> + igt_subtest_with_dynamic("atomic-invalid-params") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_setup(&data, pipe, output);
> + atomic_invalid_params(&data, output);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_describe("Test case to use FB_DAMAGE_CLIPS plane property.");
> - igt_subtest("atomic-plane-damage") {
> - if (!igt_plane_has_prop(primary, IGT_PLANE_FB_DAMAGE_CLIPS))
> - continue;
> - atomic_setup(&display, pipe, output, primary, &fb);
> - atomic_plane_damage(pipe_obj, primary, &fb);
> - atomic_clear(&display, pipe, primary, output);
> + igt_subtest_with_dynamic("atomic-plane-damage") {
> + for_each_pipe_with_valid_output(&data.display, pipe, output) {
> + atomic_setup(&data, pipe, output);
> +
> + if (!igt_plane_has_prop(data.primary, IGT_PLANE_FB_DAMAGE_CLIPS))
> + continue;
> +
> + igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
> + atomic_plane_damage(&data);
> + atomic_clear(&data, pipe, output);
> + }
> + break;
> + }
> }
>
> igt_fixture {
> - igt_display_fini(&display);
> - close(display.drm_fd);
> + igt_display_fini(&data.display);
> + close(data.drm_fd);
> }
> }
More information about the igt-dev
mailing list