[igt-dev] [PATCH i-g-t v3 1/2] tests/kms_content_protection: Test Cleanup
Karthik B S
karthik.b.s at intel.com
Thu Sep 22 06:46:59 UTC 2022
On 9/21/2022 4:53 PM, Modem, Bhanuprakash wrote:
> On Tue-13-09-2022 02:34 pm, Karthik B S wrote:
>> This patch includes:
>> 1.Add a modeset before checking output is HDCP capable.
>> Test currently skips on multidisplay MST because we're checking
>> if output is HDCP capable before doing a modeset on the output.
>> 2.Call igt_display_reset before starting the subtest.
>> 3.test_fini function added to prepare test for converting to
>> dynamic.
>> 4.Remove redundant mode override.
>> 5.Try other pipe/output combo for MST if failure is seen on one.
>>
>> Signed-off-by: Karthik B S <karthik.b.s at intel.com>
>> ---
>> tests/kms_content_protection.c | 179 +++++++++++++++++----------------
>> 1 file changed, 92 insertions(+), 87 deletions(-)
>>
>> diff --git a/tests/kms_content_protection.c
>> b/tests/kms_content_protection.c
>> index 3041f1cd..eb59f3fe 100644
>> --- a/tests/kms_content_protection.c
>> +++ b/tests/kms_content_protection.c
>
> Do we need test_cp_disable() inside the
> test_content_protection_cleanup()?
>
> If Yes, then you need to update the commit style arg based on the system.
>
> Else please drop it.
Thank you for the review.
test_cp_disable() is required to ensure all displays have CP disabled,
especially on multidisplay and MST setups. Will add the is_atomic check
while passing the commit style arg.
Thanks,
Karthik.B.S
>
> - Bhanu
>
>> @@ -170,18 +170,15 @@ static void modeset_with_fb(const enum pipe
>> pipe, igt_output_t *output,
>> enum igt_commit_style s)
>> {
>> igt_display_t *display = &data.display;
>> - drmModeModeInfo mode;
>> + drmModeModeInfo *mode;
>> igt_plane_t *primary;
>> - igt_assert(kmstest_get_connector_default_mode(
>> - display->drm_fd, output->config.connector, &mode));
>> -
>> - igt_output_override_mode(output, &mode);
>> + mode = igt_output_get_mode(output);
>> igt_output_set_pipe(output, pipe);
>> primary = igt_output_get_plane_type(output,
>> DRM_PLANE_TYPE_PRIMARY);
>> igt_plane_set_fb(primary, &data.red);
>> - igt_fb_set_size(&data.red, primary, mode.hdisplay, mode.vdisplay);
>> + igt_fb_set_size(&data.red, primary, mode->hdisplay,
>> mode->vdisplay);
>> igt_display_commit2(display, s);
>> @@ -317,90 +314,61 @@ static bool write_srm_as_fw(const __u8 *srm,
>> int len)
>> }
>> static void test_content_protection_on_output(igt_output_t *output,
>> + enum pipe pipe,
>> enum igt_commit_style s,
>> int content_type)
>> {
>> igt_display_t *display = &data.display;
>> - igt_plane_t *primary;
>> - enum pipe pipe;
>> bool ret;
>> - for_each_pipe(display, pipe) {
>> - if (!igt_pipe_connector_valid(pipe, output))
>> - continue;
>> -
>> - /*
>> - * If previous subtest of connector failed, pipe
>> - * attached to that connector is not released.
>> - * Because of that we have to choose the non
>> - * attached pipe for this subtest.
>> - */
>> - if (!igt_pipe_is_free(display, pipe))
>> - continue;
>> -
>> - modeset_with_fb(pipe, output, s);
>> - test_cp_enable_with_retry(output, s, 3, content_type, false,
>> - false);
>> -
>> - if (data.cp_tests & CP_TYPE_CHANGE) {
>> - /* Type 1 -> Type 0 */
>> - test_cp_enable_with_retry(output, s, 3,
>> - HDCP_CONTENT_TYPE_0, false,
>> - true);
>> - /* Type 0 -> Type 1 */
>> - test_cp_enable_with_retry(output, s, 3,
>> - content_type, false,
>> - true);
>> - }
>> -
>> - if (data.cp_tests & CP_MEI_RELOAD) {
>> - igt_assert_f(!igt_kmod_unload("mei_hdcp", 0),
>> - "mei_hdcp unload failed");
>> + test_cp_enable_with_retry(output, s, 3, content_type, false,
>> + false);
>> +
>> + if (data.cp_tests & CP_TYPE_CHANGE) {
>> + /* Type 1 -> Type 0 */
>> + test_cp_enable_with_retry(output, s, 3,
>> + HDCP_CONTENT_TYPE_0, false,
>> + true);
>> + /* Type 0 -> Type 1 */
>> + test_cp_enable_with_retry(output, s, 3,
>> + content_type, false,
>> + true);
>> + }
>> - /* Expected to fail */
>> - test_cp_enable_with_retry(output, s, 3,
>> - content_type, true, false);
>> + if (data.cp_tests & CP_MEI_RELOAD) {
>> + igt_assert_f(!igt_kmod_unload("mei_hdcp", 0),
>> + "mei_hdcp unload failed");
>> - igt_assert_f(!igt_kmod_load("mei_hdcp", NULL),
>> - "mei_hdcp load failed");
>> + /* Expected to fail */
>> + test_cp_enable_with_retry(output, s, 3,
>> + content_type, true, false);
>> - /* Expected to pass */
>> - test_cp_enable_with_retry(output, s, 3,
>> - content_type, false, false);
>> - }
>> + igt_assert_f(!igt_kmod_load("mei_hdcp", NULL),
>> + "mei_hdcp load failed");
>> - if (data.cp_tests & CP_LIC)
>> - test_cp_lic(output);
>> + /* Expected to pass */
>> + test_cp_enable_with_retry(output, s, 3,
>> + content_type, false, false);
>> + }
>> - if (data.cp_tests & CP_DPMS) {
>> - igt_pipe_set_prop_value(display, pipe,
>> - IGT_CRTC_ACTIVE, 0);
>> - igt_display_commit2(display, s);
>> + if (data.cp_tests & CP_LIC)
>> + test_cp_lic(output);
>> - igt_pipe_set_prop_value(display, pipe,
>> - IGT_CRTC_ACTIVE, 1);
>> - igt_display_commit2(display, s);
>> + if (data.cp_tests & CP_DPMS) {
>> + igt_pipe_set_prop_value(display, pipe,
>> + IGT_CRTC_ACTIVE, 0);
>> + igt_display_commit2(display, s);
>> - ret = wait_for_prop_value(output, CP_ENABLED,
>> - KERNEL_AUTH_TIME_ALLOWED_MSEC);
>> - if (!ret)
>> - test_cp_enable_with_retry(output, s, 2,
>> - content_type, false,
>> - false);
>> - }
>> + igt_pipe_set_prop_value(display, pipe,
>> + IGT_CRTC_ACTIVE, 1);
>> + igt_display_commit2(display, s);
>> - test_cp_disable(output, s);
>> - primary = igt_output_get_plane_type(output,
>> - DRM_PLANE_TYPE_PRIMARY);
>> - igt_plane_set_fb(primary, NULL);
>> - igt_output_set_pipe(output, PIPE_NONE);
>> -
>> - /*
>> - * Testing a output with a pipe is enough for HDCP
>> - * testing. No ROI in testing the connector with other
>> - * pipes. So Break the loop on pipe.
>> - */
>> - break;
>> + ret = wait_for_prop_value(output, CP_ENABLED,
>> + KERNEL_AUTH_TIME_ALLOWED_MSEC);
>> + if (!ret)
>> + test_cp_enable_with_retry(output, s, 2,
>> + content_type, false,
>> + false);
>> }
>> }
>> @@ -458,7 +426,8 @@ static bool sink_hdcp2_capable(igt_output_t
>> *output)
>> return strstr(buf, "HDCP2.2");
>> }
>> -static void prepare_modeset_on_mst_output(igt_output_t *output)
>> +static void
>> +prepare_modeset_on_mst_output(igt_output_t *output)
>> {
>> drmModeModeInfo *mode;
>> igt_plane_t *primary;
>> @@ -477,7 +446,8 @@ static void
>> prepare_modeset_on_mst_output(igt_output_t *output)
>> igt_plane_set_size(primary, width, height);
>> }
>> -static bool output_hdcp_capable(igt_output_t *output, int
>> content_type)
>> +static bool
>> +output_hdcp_capable(igt_output_t *output, int content_type)
>> {
>> if (!output->props[IGT_CONNECTOR_CONTENT_PROTECTION])
>> return false;
>> @@ -499,6 +469,19 @@ static bool output_hdcp_capable(igt_output_t
>> *output, int content_type)
>> return true;
>> }
>> +static void
>> +test_fini(igt_output_t *output, enum igt_commit_style s)
>> +{
>> + igt_plane_t *primary;
>> +
>> + test_cp_disable(output, s);
>> + primary = igt_output_get_plane_type(output,
>> + DRM_PLANE_TYPE_PRIMARY);
>> + igt_plane_set_fb(primary, NULL);
>> + igt_output_set_pipe(output, PIPE_NONE);
>> + igt_display_commit2(&data.display, s);
>> +}
>> +
>> static void
>> test_content_protection(enum igt_commit_style s, int content_type)
>> {
>> @@ -511,10 +494,27 @@ test_content_protection(enum igt_commit_style
>> s, int content_type)
>> "mei_hdcp module is not loaded\n");
>> for_each_connected_output(display, output) {
>> - if (!output_hdcp_capable(output, content_type))
>> - continue;
>> + for_each_pipe(display, pipe) {
>> + if (!igt_pipe_connector_valid(pipe, output))
>> + continue;
>> +
>> + igt_display_reset(display);
>> + modeset_with_fb(pipe, output, s);
>> +
>> + if (!output_hdcp_capable(output, content_type))
>> + continue;
>> +
>> + test_content_protection_on_output(output, pipe, s,
>> content_type);
>> + test_fini(output, s);
>> +
>> + /*
>> + * Testing a output with a pipe is enough for HDCP
>> + * testing. No ROI in testing the connector with other
>> + * pipes. So Break the loop on pipe.
>> + */
>> + break;
>> + }
>> - test_content_protection_on_output(output, s, content_type);
>> valid_tests++;
>> }
>> @@ -596,6 +596,7 @@ test_content_protection_mst(int content_type)
>> igt_output_t *output;
>> int valid_outputs = 0, dp_mst_outputs = 0, ret, count, max_pipe
>> = 0, i;
>> enum pipe pipe;
>> + bool pipe_found;
>> igt_output_t *mst_output[IGT_MAX_PIPES],
>> *hdcp_mst_output[IGT_MAX_PIPES];
>> for_each_pipe(display, pipe)
>> @@ -607,16 +608,20 @@ test_content_protection_mst(int content_type)
>> if (!output_is_dp_mst(output, dp_mst_outputs))
>> continue;
>> - igt_assert_f(igt_pipe_connector_valid(pipe, output),
>> "Output-pipe combination invalid\n");
>> + pipe_found = false;
>> + for_each_pipe(display, pipe) {
>> + if (igt_pipe_is_free(display, pipe) &&
>> + igt_pipe_connector_valid(pipe, output)) {
>> + pipe_found = true;
>> + break;
>> + }
>> + }
>> +
>> + igt_assert_f(pipe_found, "No valid pipe found for %s\n",
>> output->name);
>> igt_output_set_pipe(output, pipe);
>> prepare_modeset_on_mst_output(output);
>> mst_output[dp_mst_outputs++] = output;
>> -
>> - pipe++;
>> -
>> - if (pipe > max_pipe)
>> - break;
>> }
>> igt_require_f(dp_mst_outputs > 1, "No DP MST set up with >= 2
>> outputs found in a single topology\n");
>
More information about the igt-dev
mailing list