[igt-dev] [i-g-t V4 38/52] tests/i915/kms_big_joiner: Negative tests for Bigjoiner
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Thu Sep 22 15:59:50 UTC 2022
Add negative tests to validate Bigjoiner or 8K mode.
Example:
* Pipe-D wont support a mode > 5K
* To use 8K mode on a pipe then consecutive pipe must be available & free.
Kernel should reject the commit/modeset if above conditions won't met.
V2:
- Fix redundant negative tests
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
---
tests/i915/kms_big_joiner.c | 194 ++++++++++++++++--------------------
1 file changed, 85 insertions(+), 109 deletions(-)
diff --git a/tests/i915/kms_big_joiner.c b/tests/i915/kms_big_joiner.c
index 7d400616..a1efb146 100644
--- a/tests/i915/kms_big_joiner.c
+++ b/tests/i915/kms_big_joiner.c
@@ -45,111 +45,40 @@ typedef struct {
static void test_invalid_modeset(data_t *data)
{
- drmModeModeInfo *mode;
+ igt_output_t *output;
igt_display_t *display = &data->display;
- igt_output_t *output, *big_joiner_output = NULL, *second_output = NULL;
int ret;
- igt_pipe_t *pipe;
- igt_plane_t *plane;
-
- igt_display_reset(display);
-
- for_each_connected_output(display, output) {
- mode = &output->config.connector->modes[0];
-
- if (data->big_joiner_output[0].id == output->id) {
- big_joiner_output = output;
- } else if (second_output == NULL) {
- second_output = output;
- }
- }
-
- igt_output_set_pipe(big_joiner_output, data->pipe1);
-
- mode = &big_joiner_output->config.connector->modes[data->big_joiner_output[0].mode_number];
- igt_output_override_mode(big_joiner_output, mode);
- pipe = &display->pipes[data->pipe1];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
+ igt_info("Bigjoiner test on ");
+ for_each_connected_output(display, output){
+ enum pipe p = output->pending_pipe;
+ drmModeModeInfo *mode;
+ igt_pipe_t *pipe;
+ igt_plane_t *plane;
- igt_plane_set_fb(plane, &data->fb);
- igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
- igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+ if (p == PIPE_NONE)
+ continue;
- igt_display_commit2(display, COMMIT_ATOMIC);
+ mode = igt_output_get_mode(output);
+ igt_info("pipe:%s, output:%s, mode:", kmstest_pipe_name(p), igt_output_name(output));
+ kmstest_dump_mode(mode);
- igt_output_set_pipe(second_output, data->pipe2);
+ pipe = &display->pipes[p];
+ plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- mode = igt_output_get_mode(second_output);
-
- pipe = &display->pipes[data->pipe2];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
-
- igt_plane_set_fb(plane, &data->fb);
- igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
- igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_fb(plane, &data->fb);
+ igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
+ igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+ }
/* This commit is expectd to fail as this pipe is being used for big joiner */
ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- igt_assert_lt(ret, 0);
-
- igt_output_set_pipe(big_joiner_output, PIPE_NONE);
- igt_output_set_pipe(second_output, PIPE_NONE);
-
- pipe = &display->pipes[data->pipe1];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
-
- /*
- * Do not explicitly set the plane of the second output to NULL,
- * as it is the adjacent pipe to the big joiner output and
- * setting the big joiner plane to NULL will take care of this.
- */
- igt_plane_set_fb(plane, NULL);
- igt_display_commit2(display, COMMIT_ATOMIC);
- igt_output_override_mode(big_joiner_output, NULL);
-
- igt_output_set_pipe(second_output, data->pipe2);
-
- mode = igt_output_get_mode(second_output);
-
- pipe = &display->pipes[data->pipe2];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
-
- igt_plane_set_fb(plane, &data->fb);
- igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
- igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
+ igt_display_reset(&data->display);
igt_display_commit2(display, COMMIT_ATOMIC);
- igt_output_set_pipe(big_joiner_output, data->pipe1);
-
- mode = &big_joiner_output->config.connector->modes[data->big_joiner_output[0].mode_number];
- igt_output_override_mode(big_joiner_output, mode);
-
- pipe = &display->pipes[data->pipe1];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
-
- igt_plane_set_fb(plane, &data->fb);
- igt_fb_set_size(&data->fb, plane, mode->hdisplay, mode->vdisplay);
- igt_plane_set_size(plane, mode->hdisplay, mode->vdisplay);
-
- /* This commit is expected to fail as the adjacent pipe is already in use*/
- ret = igt_display_try_commit_atomic(display, DRM_MODE_ATOMIC_TEST_ONLY |
- DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
igt_assert_lt(ret, 0);
-
- igt_output_set_pipe(big_joiner_output, PIPE_NONE);
- igt_output_set_pipe(second_output, PIPE_NONE);
- igt_plane_set_fb(plane, NULL);
-
- pipe = &display->pipes[data->pipe2];
- plane = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- igt_plane_set_fb(plane, NULL);
-
- igt_display_commit2(display, COMMIT_ATOMIC);
-
- igt_output_override_mode(big_joiner_output, NULL);
}
static void test_basic_modeset(data_t *data)
@@ -261,19 +190,17 @@ igt_main
igt_require(data.display.is_atomic);
for_each_connected_output(&data.display, output) {
- if (count < 2) {
- for (i = 0; i < output->config.connector->count_modes; i++) {
- mode = &output->config.connector->modes[i];
- if (mode->hdisplay > MAX_HDISPLAY_PER_PIPE) {
- data.big_joiner_output[count].mode_number = i;
- data.big_joiner_output[count].id = output->id;
- count++;
-
- width = max(width, mode->hdisplay);
- height = max(height, mode->vdisplay);
- break;
- }
- }
+ igt_sort_connector_modes(output->config.connector,
+ sort_drm_modes_by_res_dsc);
+
+ mode = &output->config.connector->modes[0];
+ if (mode->hdisplay > MAX_HDISPLAY_PER_PIPE) {
+ data.big_joiner_output[count].mode_number = i;
+ data.big_joiner_output[count].id = output->id;
+ count++;
+
+ width = max(width, mode->hdisplay);
+ height = max(height, mode->vdisplay);
}
valid_output++;
}
@@ -303,14 +230,63 @@ igt_main
igt_describe("Verify if the modeset on the adjoining pipe is rejected "
"when the pipe is active with a big joiner modeset");
igt_subtest_with_dynamic("invalid-modeset") {
- igt_require_f(valid_output > 1, "No valid Second output found\n");
- for (i = 0; i < data.n_pipes - 1; i++) {
- data.pipe1 = pipe_seq[i];
- data.pipe2 = pipe_seq[i + 1];
- igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe_seq[i]),
- kmstest_pipe_name(pipe_seq[i + 1]))
+ data.pipe1 = pipe_seq[j - 1];
+
+ igt_display_reset(&data.display);
+ for_each_connected_output(&data.display, output) {
+ igt_sort_connector_modes(output->config.connector,
+ sort_drm_modes_by_res_dsc);
+
+ if (data.big_joiner_output[0].id != output->id)
+ continue;
+
+ igt_sort_connector_modes(output->config.connector,
+ sort_drm_modes_by_res_dsc);
+
+ igt_output_set_pipe(output, data.pipe1);
+ igt_output_override_mode(output, &output->config.connector->modes[0]);
+
+ igt_assert(!igt_check_bigjoiner_support(&data.display));
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(data.pipe1),
+ igt_output_name(output))
test_invalid_modeset(&data);
}
+
+ if(valid_output > 1) {
+ for (i = 0; i < data.n_pipes - 1; i++) {
+ igt_output_t *first_output = NULL, *second_output = NULL;
+
+ data.pipe1 = pipe_seq[i];
+ data.pipe2 = pipe_seq[i + 1];
+
+ igt_display_reset(&data.display);
+ for_each_connected_output(&data.display, output) {
+ igt_sort_connector_modes(output->config.connector,
+ sort_drm_modes_by_res_dsc);
+
+ if (data.big_joiner_output[0].id == output->id) {
+ first_output = output;
+ igt_output_set_pipe(output, data.pipe1);
+ igt_output_override_mode(output, &output->config.connector->modes[0]);
+ } else if (second_output == NULL) {
+ second_output = output;
+ igt_output_set_pipe(output, data.pipe2);
+ igt_output_override_mode(output, &output->config.connector->modes[0]);
+ }
+ }
+
+ igt_assert(!igt_check_bigjoiner_support(&data.display));
+
+ igt_dynamic_f("pipe-%s-%s-pipe-%s-%s",
+ kmstest_pipe_name(data.pipe1),
+ igt_output_name(first_output),
+ kmstest_pipe_name(data.pipe2),
+ igt_output_name(second_output))
+ test_invalid_modeset(&data);
+ }
+ }
}
igt_describe("Verify simultaneous modeset on 2 big joiner outputs");
--
2.37.3
More information about the igt-dev
mailing list