[igt-dev] [PATCH i-g-t] tests/i915/i915_pm_backlight: Add new subtest to validate dual panel backlight
Petri Latvala
petri.latvala at intel.com
Mon Sep 26 10:05:38 UTC 2022
On Mon, Sep 26, 2022 at 08:43:18AM +0530, Nidhi Gupta wrote:
> Since driver can now support multiple eDPs and Debugfs structure for
> backlight changed per connector the test should then iterate through
> all eDP connectors.
>
> Signed-off-by: Nidhi Gupta <nidhi1.gupta at intel.com>
> ---
> tests/i915/i915_pm_backlight.c | 70 +++++++++++++++++++---------------
> 1 file changed, 39 insertions(+), 31 deletions(-)
>
> diff --git a/tests/i915/i915_pm_backlight.c b/tests/i915/i915_pm_backlight.c
> index cafae7f7..1532193b 100644
> --- a/tests/i915/i915_pm_backlight.c
> +++ b/tests/i915/i915_pm_backlight.c
> @@ -37,25 +37,26 @@
>
> struct context {
> int max;
> + const char *path;
> };
>
>
> #define TOLERANCE 5 /* percent */
> -#define BACKLIGHT_PATH "/sys/class/backlight/intel_backlight"
> +#define BACKLIGHT_PATH "/sys/class/backlight"
>
> #define FADESTEPS 10
> #define FADESPEED 100 /* milliseconds between steps */
>
> IGT_TEST_DESCRIPTION("Basic backlight sysfs test");
>
> -static int backlight_read(int *result, const char *fname)
> +static int backlight_read(int *result, const char *fname, struct context *context)
> {
> int fd;
> char full[PATH_MAX];
> char dst[64];
> int r, e;
>
> - igt_assert(snprintf(full, PATH_MAX, "%s/%s", BACKLIGHT_PATH, fname) < PATH_MAX);
> + igt_assert(snprintf(full, PATH_MAX, "%s/%s/%s", BACKLIGHT_PATH, context->path, fname) < PATH_MAX);
>
> fd = open(full, O_RDONLY);
> if (fd == -1)
> @@ -73,14 +74,14 @@ static int backlight_read(int *result, const char *fname)
> return errno;
> }
>
> -static int backlight_write(int value, const char *fname)
> +static int backlight_write(int value, const char *fname, struct context *context)
> {
> int fd;
> char full[PATH_MAX];
> char src[64];
> int len;
>
> - igt_assert(snprintf(full, PATH_MAX, "%s/%s", BACKLIGHT_PATH, fname) < PATH_MAX);
> + igt_assert(snprintf(full, PATH_MAX, "%s/%s/%s", BACKLIGHT_PATH, context->path, fname) < PATH_MAX);
> fd = open(full, O_WRONLY);
> if (fd == -1)
> return -errno;
> @@ -100,12 +101,12 @@ static void test_and_verify(struct context *context, int val)
> const int tolerance = val * TOLERANCE / 100;
> int result;
>
> - igt_assert_eq(backlight_write(val, "brightness"), 0);
> - igt_assert_eq(backlight_read(&result, "brightness"), 0);
> + igt_assert_eq(backlight_write(val, "brightness", context), 0);
> + igt_assert_eq(backlight_read(&result, "brightness", context), 0);
> /* Check that the exact value sticks */
> igt_assert_eq(result, val);
>
> - igt_assert_eq(backlight_read(&result, "actual_brightness"), 0);
> + igt_assert_eq(backlight_read(&result, "actual_brightness", context), 0);
> /* Some rounding may happen depending on hw */
> igt_assert_f(result >= max(0, val - tolerance) &&
> result <= min(context->max, val + tolerance),
> @@ -124,16 +125,16 @@ static void test_bad_brightness(struct context *context)
> {
> int val;
> /* First write some sane value */
> - backlight_write(context->max / 2, "brightness");
> + backlight_write(context->max / 2, "brightness", context);
> /* Writing invalid values should fail and not change the value */
> - igt_assert_lt(backlight_write(-1, "brightness"), 0);
> - backlight_read(&val, "brightness");
> + igt_assert_lt(backlight_write(-1, "brightness", context), 0);
> + backlight_read(&val, "brightness", context);
> igt_assert_eq(val, context->max / 2);
> - igt_assert_lt(backlight_write(context->max + 1, "brightness"), 0);
> - backlight_read(&val, "brightness");
> + igt_assert_lt(backlight_write(context->max + 1, "brightness", context), 0);
> + backlight_read(&val, "brightness", context);
> igt_assert_eq(val, context->max / 2);
> - igt_assert_lt(backlight_write(INT_MAX, "brightness"), 0);
> - backlight_read(&val, "brightness");
> + igt_assert_lt(backlight_write(INT_MAX, "brightness", context), 0);
> + backlight_read(&val, "brightness", context);
> igt_assert_eq(val, context->max / 2);
> }
>
> @@ -186,6 +187,7 @@ igt_main
> igt_display_t display;
> igt_output_t *output;
> struct igt_fb fb;
> + char paths[][50] = { "intel_backlight", "card0-eDP-2-backlight" };
Hardcoding "intel_backlight" is ok but is it possible to construct
that other name from the used device? "eDP-2" is easy with
igt_output_name, but I'm not sure how to elegantly get "card0" out of
an fd...
Also consider having dynamic subtests instead for each output that has
backlight controls available.
--
Petri Latvala
>
> igt_fixture {
> enum pipe pipe;
> @@ -203,11 +205,14 @@ igt_main
> igt_display_require(&display, drm_open_driver(DRIVER_INTEL));
>
> /* Get the max value and skip the whole test if sysfs interface not available */
> - igt_skip_on(backlight_read(&old, "brightness"));
> - igt_assert(backlight_read(&context.max, "max_brightness") > -1);
> + for (size_t i = 0; i < sizeof(paths) / sizeof(paths[0]); i++) {
> + context.path = paths[i];
> + igt_skip_on(backlight_read(&old, "brightness", &context));
> + igt_assert(backlight_read(&context.max, "max_brightness", &context) > -1);
> + }
>
> /* should be ../../cardX-$output */
> - igt_assert_lt(12, readlink(BACKLIGHT_PATH "/device", full_name, sizeof(full_name) - 1));
> + igt_assert_lt(12, readlink(BACKLIGHT_PATH "/intel_backlight/device", full_name, sizeof(full_name) - 1));
> name = basename(full_name);
>
> for_each_pipe_with_valid_output(&display, pipe, output) {
> @@ -234,22 +239,25 @@ igt_main
> igt_display_commit2(&display, display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> igt_pm_enable_sata_link_power_management();
> }
> + for (size_t j = 0; j < sizeof(paths) / sizeof(paths[0]); j++) {
> + context.path = paths[j];
> +
> + igt_subtest("basic-brightness")
> + test_brightness(&context);
> + igt_subtest("bad-brightness")
> + test_bad_brightness(&context);
> + igt_subtest("fade")
> + test_fade(&context);
> + igt_subtest("fade_with_dpms")
> + test_fade_with_dpms(&context, output);
> + igt_subtest("fade_with_suspend")
> + test_fade_with_suspend(&context, output);
>
> - igt_subtest("basic-brightness")
> - test_brightness(&context);
> - igt_subtest("bad-brightness")
> - test_bad_brightness(&context);
> - igt_subtest("fade")
> - test_fade(&context);
> - igt_subtest("fade_with_dpms")
> - test_fade_with_dpms(&context, output);
> - igt_subtest("fade_with_suspend")
> - test_fade_with_suspend(&context, output);
> -
> - igt_fixture {
> /* Restore old brightness */
> - backlight_write(old, "brightness");
> + backlight_write(old, "brightness", &context);
> + }
>
> + igt_fixture {
> igt_display_fini(&display);
> igt_remove_fb(display.drm_fd, &fb);
> igt_pm_restore_sata_link_power_management();
> --
> 2.36.0
>
More information about the igt-dev
mailing list