[igt-dev] [PATCH i-g-t v5 1/2] tests/i915/kms_psr2_sf: Convert tests to dynamic
Jeevan B
jeevan.b at intel.com
Tue Sep 27 07:58:08 UTC 2022
Converting the existing subtests to dynamic subtests.
Adding support for each_pipe, currently PSR2 is supported on
few pipes so breaking the loop for other pipes currently.
v2: Check for pipe supporting PSR2 or not and then add to dynamic subtest.
v3: Check PSR2 support once in fixture then iterate pipes.
v4: Add output part into dynamic name.
v5: Add the missing code and increase pipes and outputs array size.
Signed-off-by: Jeevan B <jeevan.b at intel.com>
---
tests/i915/kms_psr2_sf.c | 293 ++++++++++++++++++++++++++-------------
1 file changed, 196 insertions(+), 97 deletions(-)
diff --git a/tests/i915/kms_psr2_sf.c b/tests/i915/kms_psr2_sf.c
index 6612587c..9f98d3fb 100644
--- a/tests/i915/kms_psr2_sf.c
+++ b/tests/i915/kms_psr2_sf.c
@@ -237,7 +237,7 @@ static void plane_move_setup_square(data_t *data, igt_fb_t *fb, uint32_t h,
set_clip(&data->plane_move_clip, x, y, SQUARE_SIZE, SQUARE_SIZE);
}
-static void prepare(data_t *data)
+static void prepare(data_t *data, igt_output_t *output)
{
igt_plane_t *primary, *sprite = NULL, *cursor = NULL;
int fb_w, fb_h, x, y, view_w, view_h;
@@ -262,12 +262,12 @@ static void prepare(data_t *data)
0.0, 1.0, 0.0,
&data->fb_primary);
- primary = igt_output_get_plane_type(data->output,
+ primary = igt_output_get_plane_type(output,
DRM_PLANE_TYPE_PRIMARY);
switch (data->test_plane_id) {
case DRM_PLANE_TYPE_OVERLAY:
- sprite = igt_output_get_plane_type(data->output,
+ sprite = igt_output_get_plane_type(output,
DRM_PLANE_TYPE_OVERLAY);
/*All blue plane*/
igt_create_color_fb(data->drm_fd,
@@ -318,7 +318,7 @@ static void prepare(data_t *data)
data->test_plane = primary;
if (data->op == OVERLAY_PRIM_UPDATE) {
- sprite = igt_output_get_plane_type(data->output,
+ sprite = igt_output_get_plane_type(output,
DRM_PLANE_TYPE_OVERLAY);
igt_create_color_fb(data->drm_fd, fb_w, fb_h,
@@ -338,7 +338,7 @@ static void prepare(data_t *data)
break;
case DRM_PLANE_TYPE_CURSOR:
- cursor = igt_output_get_plane_type(data->output,
+ cursor = igt_output_get_plane_type(output,
DRM_PLANE_TYPE_CURSOR);
igt_plane_set_position(cursor, 0, 0);
@@ -808,12 +808,12 @@ static void run(data_t *data)
}
}
-static void cleanup(data_t *data)
+static void cleanup(data_t *data, igt_output_t *output)
{
igt_plane_t *primary;
igt_plane_t *sprite;
- primary = igt_output_get_plane_type(data->output,
+ primary = igt_output_get_plane_type(output,
DRM_PLANE_TYPE_PRIMARY);
igt_plane_set_fb(primary, NULL);
@@ -824,7 +824,7 @@ static void cleanup(data_t *data)
}
if (data->op == OVERLAY_PRIM_UPDATE) {
- sprite = igt_output_get_plane_type(data->output,
+ sprite = igt_output_get_plane_type(output,
DRM_PLANE_TYPE_OVERLAY);
igt_plane_set_position(sprite, 0, 0);
igt_plane_set_fb(sprite, NULL);
@@ -838,14 +838,35 @@ static void cleanup(data_t *data)
igt_remove_fb(data->drm_fd, &data->fb_test);
}
+static int check_psr2_support(data_t *data, enum pipe pipe)
+{
+ int status;
+
+ igt_output_t *output;
+ igt_display_t *display = &data->display;
+
+ igt_display_reset(display);
+ output = data->output;
+ igt_output_set_pipe(output, pipe);
+
+ prepare(data, output);
+ status = psr_wait_entry(data->debugfs_fd, PSR_MODE_2);
+ cleanup(data, output);
+
+ return status;
+}
+
igt_main
{
data_t data = {};
- int i;
+ igt_output_t *outputs[IGT_MAX_PIPES * IGT_MAX_PIPES];
+ int i, j;
+ enum pipe pipe;
+ int pipes[IGT_MAX_PIPES * IGT_MAX_PIPES];
+ int n_pipes = 0;
igt_fixture {
drmModeResPtr res;
- int r;
data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
@@ -873,146 +894,218 @@ igt_main
data.big_fb_height = res->max_height;
igt_info("Big framebuffer size %dx%d\n",
data.big_fb_width, data.big_fb_height);
- prepare(&data);
- r = psr_wait_entry(data.debugfs_fd, PSR_MODE_2);
- if (!r)
- psr_print_debugfs(data.debugfs_fd);
igt_require_f(psr2_selective_fetch_check(data.debugfs_fd),
"PSR2 selective fetch not enabled\n");
- cleanup(&data);
- if (!r)
- psr_print_debugfs(data.debugfs_fd);
- igt_require_f(r, "PSR2 can not be enabled\n");
+
+ for_each_pipe_with_valid_output(&data.display, pipe, data.output) {
+ if (check_psr2_support(&data, pipe)) {
+ pipes[n_pipes] = pipe;
+ outputs[n_pipes] = data.output;
+ n_pipes++;
+ }
+ }
}
/* Verify primary plane selective fetch */
igt_describe("Test that selective fetch works on primary plane");
- igt_subtest_f("primary-%s-sf-dmg-area", op_str(data.op)) {
- for (i = 1; i <= MAX_DAMAGE_AREAS; i++) {
- data.damage_area_count = i;
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("primary-%s-sf-dmg-area", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ for (j = 1; j <= MAX_DAMAGE_AREAS; j++) {
+ data.damage_area_count = j;
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
}
/* Verify primary plane selective fetch with big fb */
data.big_fb_test = 1;
igt_describe("Test that selective fetch works on primary plane with big fb");
- igt_subtest_f("primary-%s-sf-dmg-area-big-fb", op_str(data.op)) {
- for (i = 1; i <= MAX_DAMAGE_AREAS; i++) {
- data.damage_area_count = i;
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("primary-%s-sf-dmg-area-big-fb", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ for (j = 1; j <= MAX_DAMAGE_AREAS; j++) {
+ data.damage_area_count = j;
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
}
- data.big_fb_test = 0;
+ data.big_fb_test = 0;
/* Verify overlay plane selective fetch */
igt_describe("Test that selective fetch works on overlay plane");
- igt_subtest_f("overlay-%s-sf-dmg-area", op_str(data.op)) {
- for (i = 1; i <= MAX_DAMAGE_AREAS; i++) {
- data.damage_area_count = i;
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("overlay-%s-sf-dmg-area", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ for (j = 1; j <= MAX_DAMAGE_AREAS; j++) {
+ data.damage_area_count = j;
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
}
- /* Verify overlay plane selective fetch */
+ data.damage_area_count = 1;
+ /* Verify cursor plane selective fetch */
igt_describe("Test that selective fetch works on cursor plane");
- igt_subtest_f("cursor-%s-sf", op_str(data.op)) {
- data.damage_area_count = 1;
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
data.op = PLANE_MOVE_CONTINUOUS;
igt_describe("Test that selective fetch works on moving cursor plane (no update)");
- igt_subtest_f("cursor-%s-sf", op_str(data.op)) {
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
igt_describe("Test that selective fetch works on moving cursor plane exceeding partially visible area (no update)");
- igt_subtest_f("cursor-%s-sf", op_str(data.op)) {
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
data.op = PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
igt_describe("Test that selective fetch works on moving cursor plane exceeding fully visible area (no update)");
- igt_subtest_f("cursor-%s-sf", op_str(data.op)) {
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
/* Only for overlay plane */
data.op = PLANE_MOVE;
/* Verify overlay plane move selective fetch */
igt_describe("Test that selective fetch works on moving overlay plane");
- igt_subtest_f("%s-sf-dmg-area", op_str(data.op)) {
- for (i = POS_TOP_LEFT; i <= POS_BOTTOM_RIGHT ; i++) {
- data.pos = i;
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("%s-sf-dmg-area", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ for (j = POS_TOP_LEFT; j <= POS_BOTTOM_RIGHT ; j++) {
+ data.pos = j;
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
}
data.op = PLANE_MOVE_CONTINUOUS;
igt_describe("Test that selective fetch works on moving overlay plane (no update)");
- igt_subtest_f("overlay-%s-sf", op_str(data.op)) {
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
data.op = PLANE_MOVE_CONTINUOUS_EXCEED;
igt_describe("Test that selective fetch works on moving overlay plane partially exceeding visible area (no update)");
- igt_subtest_f("overlay-%s-sf", op_str(data.op)) {
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
data.op = PLANE_MOVE_CONTINUOUS_EXCEED_FULLY;
igt_describe("Test that selective fetch works on moving overlay plane fully exceeding visible area (no update)");
- igt_subtest_f("overlay-%s-sf", op_str(data.op)) {
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
/* Verify primary plane selective fetch with overplay plane blended */
data.op = OVERLAY_PRIM_UPDATE;
igt_describe("Test that selective fetch works on primary plane "
"with blended overlay plane");
- igt_subtest_f("%s-sf-dmg-area", op_str(data.op)) {
- for (i = 1; i <= MAX_DAMAGE_AREAS; i++) {
- data.damage_area_count = i;
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("%s-sf-dmg-area", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ for (j = 1; j <= MAX_DAMAGE_AREAS; j++) {
+ data.damage_area_count = j;
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
}
@@ -1023,12 +1116,18 @@ igt_main
data.op = PLANE_UPDATE_CONTINUOUS;
data.primary_format = DRM_FORMAT_NV12;
igt_describe("Test that selective fetch works on overlay plane");
- igt_subtest_f("overlay-%s-sf", op_str(data.op)) {
- data.damage_area_count = 1;
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
- prepare(&data);
- run(&data);
- cleanup(&data);
+ igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) {
+ for (i = 0; i < n_pipes; i++) {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipes[i]),
+ igt_output_name(outputs[i])) {
+ igt_output_set_pipe(outputs[i], pipes[i]);
+ data.damage_area_count = 1;
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ prepare(&data, outputs[i]);
+ run(&data);
+ cleanup(&data, outputs[i]);
+ }
+ }
}
igt_fixture {
--
2.36.0
More information about the igt-dev
mailing list