[igt-dev] [PATCH i-g-t v2] tests/kms_atomic: Test cleanup
Swati Sharma
swati2.sharma at intel.com
Tue Sep 27 12:17:04 UTC 2022
Removed unnecessary newlines and comments.
Converted subtests to dynamic subtests.
v2: -As thumb rule, all comments should start from uppercase.
-Corrected multiline comments
Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
---
tests/kms_atomic.c | 394 ++++++++++++++++++++++++---------------------
1 file changed, 207 insertions(+), 187 deletions(-)
diff --git a/tests/kms_atomic.c b/tests/kms_atomic.c
index 253829f2..01d99d90 100644
--- a/tests/kms_atomic.c
+++ b/tests/kms_atomic.c
@@ -27,10 +27,6 @@
* Pekka Paalanen <pekka.paalanen at collabora.co.uk>
*/
-/*
- * Testcase: testing atomic modesetting API
- */
-
#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
@@ -54,7 +50,7 @@
#define DRM_CAP_CURSOR_HEIGHT 0x9
#endif
-IGT_TEST_DESCRIPTION("Test atomic modesetting API");
+IGT_TEST_DESCRIPTION("Test atomic modesetting API.");
enum kms_atomic_check_relax {
ATOMIC_RELAX_NONE = 0,
@@ -72,7 +68,6 @@ static inline int damage_rect_height(struct drm_mode_rect *r)
return r->y2 - r->y1;
}
-
static bool plane_filter(enum igt_atomic_plane_properties prop)
{
if ((1 << prop) & IGT_PLANE_COORD_CHANGED_MASK)
@@ -119,8 +114,10 @@ static void plane_check_current_state(igt_plane_t *plane, const uint64_t *values
plane_get_current_state(plane, current_values);
- /* Legacy cursor ioctls create their own, unknowable, internal
- * framebuffer which we can't reason about. */
+ /*
+ * Legacy cursor ioctls create their own, unknowable, internal
+ * framebuffer which we can't reason about.
+ */
if (relax & PLANE_RELAX_FB)
current_values[IGT_PLANE_FB_ID] = values[IGT_PLANE_FB_ID];
@@ -145,9 +142,7 @@ static void plane_commit_atomic_err(igt_plane_t *plane,
uint64_t current_values[IGT_NUM_PLANE_PROPS];
plane_get_current_state(plane, current_values);
-
igt_assert_eq(-err, igt_display_try_commit2(plane->pipe->display, COMMIT_ATOMIC));
-
plane_check_current_state(plane, current_values, relax);
}
@@ -186,7 +181,6 @@ static void crtc_check_current_state(igt_pipe_t *pipe,
if (pipe_values[IGT_CRTC_MODE_ID]) {
mode_prop = drmModeGetPropertyBlob(pipe->display->drm_fd,
pipe_values[IGT_CRTC_MODE_ID]);
-
igt_assert(mode_prop);
igt_assert_eq(mode_prop->length,
@@ -218,15 +212,16 @@ static void crtc_check_current_state(igt_pipe_t *pipe,
crtc_get_current_state(pipe, current_pipe_values);
- /* Optionally relax the check for MODE_ID: using the legacy SetCrtc
+ /*
+ * Optionally relax the check for MODE_ID: using the legacy SetCrtc
* API can potentially change MODE_ID even if the mode itself remains
- * unchanged. */
+ * unchanged.
+ */
if (relax & CRTC_RELAX_MODE && mode && current_pipe_values[IGT_CRTC_MODE_ID] &&
current_pipe_values[IGT_CRTC_MODE_ID] != pipe_values[IGT_CRTC_MODE_ID]) {
drmModePropertyBlobRes *cur_prop =
drmModeGetPropertyBlob(pipe->display->drm_fd,
current_pipe_values[IGT_CRTC_MODE_ID]);
-
igt_assert(cur_prop);
igt_assert_eq(cur_prop->length, sizeof(struct drm_mode_modeinfo));
@@ -296,11 +291,11 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
drmModeModeInfo *mode = igt_output_get_mode(output);
cairo_t *cr;
- /* for primary */
+ /* For primary plane */
uint32_t w = mode->hdisplay;
uint32_t h = mode->vdisplay;
- /* for overlay */
+ /* For overlay plane */
uint32_t w_overlay = mode->hdisplay / 2;
uint32_t h_overlay = mode->vdisplay / 2;
@@ -360,7 +355,7 @@ plane_primary_overlay_mutable_zpos(igt_pipe_t *pipe, igt_output_t *output,
"which the underlay should be seen\n");
plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- /* reset it back to initial state */
+ /* Reset it back to initial state */
igt_plane_set_prop_value(primary, IGT_PLANE_ZPOS, 0);
igt_plane_set_prop_value(overlay, IGT_PLANE_ZPOS, 1);
plane_commit(primary, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
@@ -393,11 +388,11 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
mode = igt_output_get_mode(output);
primary = igt_pipe_get_plane_type(pipe, DRM_PLANE_TYPE_PRIMARY);
- /* for lower plane */
+ /* For lower plane */
w_lower = mode->hdisplay;
h_lower = mode->vdisplay;
- /* for upper plane */
+ /* For upper plane */
w_upper = 64;
h_upper = 64;
@@ -407,7 +402,7 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
I915_TILING_NONE,
0.0, 0.0, 0.0, &fb_ref);
- /* create reference image */
+ /* Create reference image */
cr = igt_get_cairo_ctx(display->drm_fd, &fb_ref);
igt_assert(cairo_status(cr) == 0);
igt_paint_color(cr, 0, 0, w_lower, h_lower, 0.0, 0.0, 1.0);
@@ -416,11 +411,11 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
igt_plane_set_fb(primary, &fb_ref);
igt_display_commit2(display, COMMIT_ATOMIC);
- /* create the pipe_crc object for this pipe */
+ /* Create the pipe_crc object for this pipe */
pipe_crc = igt_pipe_crc_new(pipe->display->drm_fd, pipe->pipe,
INTEL_PIPE_CRC_SOURCE_AUTO);
- /* get reference crc */
+ /* Get reference crc */
igt_pipe_crc_start(pipe_crc);
igt_pipe_crc_get_current(display->drm_fd, pipe_crc, &ref_crc);
@@ -456,8 +451,8 @@ plane_immutable_zpos(igt_display_t *display, igt_pipe_t *pipe,
igt_assert(fb_id_upper);
/*
- * checking only pairs of plane in increasing fashion
- * to avoid combinatorial explosion
+ * Checking only pairs of plane in increasing fashion
+ * to avoid combinatorial explosion.
*/
for (int i = 0; i < n_planes - 1; i++) {
igt_plane_t *plane_lower, *plane_upper;
@@ -521,23 +516,29 @@ static void plane_overlay(igt_pipe_t *pipe, igt_output_t *output, igt_plane_t *p
igt_plane_set_fb(plane, &fb);
igt_plane_set_position(plane, w/2, h/2);
- /* Enable the overlay plane using the atomic API, and double-check
- * state is what we think it should be. */
+ /*
+ * Enable the overlay plane using the atomic API, and double-check
+ * state is what we think it should be.
+ */
plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- /* Disable the plane and check the state matches the old. */
+ /* Disable the plane and check the state matches the old */
igt_plane_set_fb(plane, NULL);
igt_plane_set_position(plane, 0, 0);
plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- /* Re-enable the plane through the legacy plane API, and verify through
- * atomic. */
+ /*
+ * Re-enable the plane through the legacy plane API, and verify through
+ * atomic.
+ */
igt_plane_set_fb(plane, &fb);
igt_plane_set_position(plane, w/2, h/2);
plane_commit(plane, COMMIT_LEGACY, ATOMIC_RELAX_NONE);
- /* Restore the plane to its original settings through the legacy plane
- * API, and verify through atomic. */
+ /*
+ * Restore the plane to its original settings through the legacy plane
+ * API, and verify through atomic.
+ */
igt_plane_set_fb(plane, NULL);
igt_plane_set_position(plane, 0, 0);
plane_commit(plane, COMMIT_LEGACY, ATOMIC_RELAX_NONE);
@@ -554,8 +555,10 @@ static void plane_primary(igt_pipe_t *pipe, igt_plane_t *plane, struct igt_fb *f
fb->drm_format, I915_TILING_NONE,
0.2, 0.2, 0.2, &fb2);
- /* Flip the primary plane using the atomic API, and double-check
- * state is what we think it should be. */
+ /*
+ * Flip the primary plane using the atomic API, and double-check
+ * state is what we think it should be.
+ */
igt_plane_set_fb(plane, &fb2);
crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
@@ -563,25 +566,28 @@ static void plane_primary(igt_pipe_t *pipe, igt_plane_t *plane, struct igt_fb *f
igt_plane_set_fb(plane, fb);
crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- /* Set the plane through the legacy CRTC/primary-plane API, and
- * verify through atomic. */
+ /*
+ * Set the plane through the legacy CRTC/primary-plane API, and
+ * verify through atomic.
+ */
igt_plane_set_fb(plane, &fb2);
crtc_commit(pipe, plane, COMMIT_LEGACY, CRTC_RELAX_MODE);
- /* Restore the plane to its original settings through the legacy CRTC
- * API, and verify through atomic. */
+ /*
+ * Restore the plane to its original settings through the legacy CRTC
+ * API, and verify through atomic.
+ */
igt_plane_set_fb(plane, fb);
crtc_commit(pipe, plane, COMMIT_LEGACY, CRTC_RELAX_MODE);
- /* Set the plane through the universal setplane API, and
- * verify through atomic. */
+ /*
+ * Set the plane through the universal setplane API, and
+ * verify through atomic.
+ */
igt_plane_set_fb(plane, &fb2);
plane_commit(plane, COMMIT_UNIVERSAL, ATOMIC_RELAX_NONE);
}
-/* test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches the
- * free-standing state objects and nothing else.
- */
static void test_only(igt_pipe_t *pipe_obj,
igt_plane_t *primary,
igt_output_t *output)
@@ -606,7 +612,7 @@ static void test_only(igt_pipe_t *pipe_obj,
igt_display_commit_atomic(pipe_obj->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- /* check the state, should still be old state */
+ /* Check the state, should still be old state */
crtc_check_current_state(pipe_obj, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
plane_check_current_state(primary, old_plane_values, ATOMIC_RELAX_NONE);
@@ -625,11 +631,11 @@ static void test_only(igt_pipe_t *pipe_obj,
igt_display_commit_atomic(pipe_obj->display, DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
- /* for extra stress, go through dpms off/on cycle */
+ /* For extra stress, go through dpms off/on cycle */
kmstest_set_connector_dpms(output->display->drm_fd, output->config.connector, DRM_MODE_DPMS_OFF);
kmstest_set_connector_dpms(output->display->drm_fd, output->config.connector, DRM_MODE_DPMS_ON);
- /* check the state, should still be old state */
+ /* Check the state, should still be old state */
crtc_check_current_state(pipe_obj, old_crtc_values, old_plane_values, ATOMIC_RELAX_NONE);
plane_check_current_state(primary, old_plane_values, ATOMIC_RELAX_NONE);
@@ -659,8 +665,10 @@ static void plane_cursor(igt_pipe_t *pipe_obj,
DRM_FORMAT_MOD_LINEAR,
0.0, 0.0, 0.0, &fb);
- /* Flip the cursor plane using the atomic API, and double-check
- * state is what we think it should be. */
+ /*
+ * Flip the cursor plane using the atomic API, and double-check
+ * state is what we think it should be.
+ */
igt_plane_set_fb(cursor, &fb);
igt_plane_set_position(cursor, x, y);
plane_commit(cursor, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
@@ -670,8 +678,10 @@ static void plane_cursor(igt_pipe_t *pipe_obj,
igt_plane_set_position(cursor, 0, 0);
plane_commit(cursor, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- /* Re-enable the plane through the legacy cursor API, and verify
- * through atomic. */
+ /*
+ * Re-enable the plane through the legacy cursor API, and verify
+ * through atomic.
+ */
igt_plane_set_fb(cursor, &fb);
igt_plane_set_position(cursor, x, y);
plane_commit(cursor, COMMIT_LEGACY, PLANE_RELAX_FB);
@@ -680,8 +690,10 @@ static void plane_cursor(igt_pipe_t *pipe_obj,
igt_plane_set_position(cursor, x - 16, y - 16);
plane_commit(cursor, COMMIT_LEGACY, PLANE_RELAX_FB);
- /* Restore the plane to its original settings through the legacy cursor
- * API, and verify through atomic. */
+ /*
+ * Restore the plane to its original settings through the legacy cursor
+ * API, and verify through atomic.
+ */
igt_plane_set_fb(cursor, NULL);
igt_plane_set_position(cursor, 0, 0);
plane_commit(cursor, COMMIT_LEGACY, ATOMIC_RELAX_NONE);
@@ -694,7 +706,7 @@ static void plane_invalid_params(igt_pipe_t *pipe,
{
struct igt_fb fb2;
- /* Pass a series of invalid object IDs for the FB ID. */
+ /* Pass a series of invalid object IDs for the FB ID */
igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, plane->drm_plane->plane_id);
plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
@@ -707,14 +719,14 @@ static void plane_invalid_params(igt_pipe_t *pipe,
igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, pipe->values[IGT_CRTC_MODE_ID]);
plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
- /* Valid, but invalid because CRTC_ID is set. */
+ /* Valid, but invalid because CRTC_ID is set */
igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, 0);
plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
igt_plane_set_fb(plane, fb);
plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- /* Pass a series of invalid object IDs for the CRTC ID. */
+ /* Pass a series of invalid object IDs for the CRTC ID */
igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, plane->drm_plane->plane_id);
plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
@@ -727,14 +739,14 @@ static void plane_invalid_params(igt_pipe_t *pipe,
igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, pipe->values[IGT_CRTC_MODE_ID]);
plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
- /* Valid, but invalid because FB_ID is set. */
+ /* Valid, but invalid because FB_ID is set */
igt_plane_set_prop_value(plane, IGT_PLANE_CRTC_ID, 0);
plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
igt_plane_set_fb(plane, fb);
plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- /* Create a framebuffer too small for the plane configuration. */
+ /* Create a framebuffer too small for the plane configuration */
igt_create_pattern_fb(pipe->display->drm_fd,
fb->width - 1, fb->height - 1,
fb->drm_format, I915_TILING_NONE, &fb2);
@@ -742,7 +754,7 @@ static void plane_invalid_params(igt_pipe_t *pipe,
igt_plane_set_prop_value(plane, IGT_PLANE_FB_ID, fb2.fb_id);
plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, ENOSPC);
- /* Restore the primary plane and check the state matches the old. */
+ /* Restore the primary plane and check the state matches the old */
igt_plane_set_fb(plane, fb);
plane_commit(plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
}
@@ -757,7 +769,7 @@ static void plane_invalid_params_fence(igt_pipe_t *pipe,
timeline = sw_sync_timeline_create();
- /* invalid fence fd */
+ /* Invalid fence fd */
igt_plane_set_fence_fd(plane, pipe->display->drm_fd);
plane_commit_atomic_err(plane, ATOMIC_RELAX_NONE, EINVAL);
@@ -784,7 +796,7 @@ static void crtc_invalid_params(igt_pipe_t *pipe,
uint64_t old_mode_id = pipe->values[IGT_CRTC_MODE_ID];
drmModeModeInfo *mode = igt_output_get_mode(output);
- /* Pass a series of invalid object IDs for the mode ID. */
+ /* Pass a series of invalid object IDs for the mode ID */
igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, plane->drm_plane->plane_id);
crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
@@ -810,7 +822,7 @@ static void crtc_invalid_params(igt_pipe_t *pipe,
DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
- /* Create a blob which is the wrong size to be a valid mode. */
+ /* Create a blob which is the wrong size to be a valid mode */
igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode) - 1);
crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
@@ -818,7 +830,7 @@ static void crtc_invalid_params(igt_pipe_t *pipe,
crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EINVAL);
- /* Restore the CRTC and check the state matches the old. */
+ /* Restore the CRTC and check the state matches the old */
igt_pipe_obj_replace_prop_blob(pipe, IGT_CRTC_MODE_ID, mode, sizeof(*mode));
crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
}
@@ -837,7 +849,7 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
timeline = sw_sync_timeline_create();
- /* invalid out_fence_ptr */
+ /* Invalid out_fence_ptr */
map = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
igt_assert(map != MAP_FAILED);
@@ -845,7 +857,7 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EFAULT);
munmap(map, PAGE_SIZE);
- /* invalid out_fence_ptr */
+ /* Invalid out_fence_ptr */
map = mmap(NULL, PAGE_SIZE, PROT_EXEC, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
igt_assert(map != MAP_FAILED);
@@ -853,7 +865,7 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EFAULT);
munmap(map, PAGE_SIZE);
- /* invalid out_fence_ptr */
+ /* Invalid out_fence_ptr */
map = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
igt_assert(map != MAP_FAILED);
@@ -861,7 +873,7 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
crtc_commit_atomic_err(pipe, plane, ATOMIC_RELAX_NONE, EFAULT);
munmap(map, PAGE_SIZE);
- /* valid in fence but not allowed prop on crtc */
+ /* Valid in fence but not allowed prop on crtc */
fence_fd = sw_sync_timeline_create_fence(timeline, 1);
igt_plane_set_fence_fd(plane, fence_fd);
@@ -870,12 +882,12 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
crtc_commit_atomic_flags_err(pipe, plane, 0, ATOMIC_RELAX_NONE, EINVAL);
- /* valid out fence ptr and flip event but not allowed prop on crtc */
+ /* Valid out fence ptr and flip event but not allowed prop on crtc */
igt_pipe_request_out_fence(pipe);
crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
- /* valid flip event but not allowed prop on crtc */
+ /* Valid flip event but not allowed prop on crtc */
igt_pipe_obj_clear_prop_changed(pipe, IGT_CRTC_OUT_FENCE_PTR);
crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
@@ -889,20 +901,20 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
/* Set invalid prop */
igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, fb->fb_id);
- /* valid out fence but invalid prop on crtc */
+ /* Valid out fence but invalid prop on crtc */
igt_pipe_request_out_fence(pipe);
crtc_commit_atomic_flags_err(pipe, plane, 0,
ATOMIC_RELAX_NONE, EINVAL);
- /* valid out fence ptr and flip event but invalid prop on crtc */
+ /* Valid out fence ptr and flip event but invalid prop on crtc */
crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
- /* valid page flip event but invalid prop on crtc */
+ /* Valid page flip event but invalid prop on crtc */
crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_PAGE_FLIP_EVENT,
ATOMIC_RELAX_NONE, EINVAL);
- /* successful TEST_ONLY with fences set */
+ /* Successful TEST_ONLY with fences set */
igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_MODE_ID, old_mode_id);
crtc_commit_atomic_flags_err(pipe, plane, DRM_MODE_ATOMIC_TEST_ONLY,
ATOMIC_RELAX_NONE, 0);
@@ -910,21 +922,19 @@ static void crtc_invalid_params_fence(igt_pipe_t *pipe,
close(fence_fd);
close(timeline);
- /* reset fences */
+ /* Reset fences */
igt_plane_set_fence_fd(plane, -1);
igt_pipe_obj_set_prop_value(pipe, IGT_CRTC_OUT_FENCE_PTR, 0);
igt_pipe_obj_clear_prop_changed(pipe, IGT_CRTC_OUT_FENCE_PTR);
crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
- /* out fence ptr but not page flip event */
+ /* Out fence ptr but not page flip event */
igt_pipe_request_out_fence(pipe);
crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
igt_assert(pipe->out_fence_fd != -1);
}
-/* Abuse the atomic ioctl directly in order to test various invalid conditions,
- * which the libdrm wrapper won't allow us to create. */
static void atomic_invalid_params(igt_pipe_t *pipe,
igt_plane_t *plane,
igt_output_t *output,
@@ -932,15 +942,15 @@ static void atomic_invalid_params(igt_pipe_t *pipe,
{
igt_display_t *display = pipe->display;
struct drm_mode_atomic ioc;
- uint32_t obj_raw[16]; /* array of objects (sized by count_objs) */
- uint32_t num_props_raw[16]; /* array of num props per obj (ditto) */
- uint32_t props_raw[256]; /* array of props (sum of count_props) */
- uint64_t values_raw[256]; /* array of values for properties (ditto) */
+ uint32_t obj_raw[16]; /* Array of objects (sized by count_objs) */
+ uint32_t num_props_raw[16]; /* Array of num props per obj (ditto) */
+ uint32_t props_raw[256]; /* Array of props (sum of count_props) */
+ uint64_t values_raw[256]; /* Array of values for properties (ditto) */
int i;
memset(&ioc, 0, sizeof(ioc));
- /* An empty request should do nothing. */
+ /* An empty request should do nothing */
do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
@@ -957,44 +967,44 @@ static void atomic_invalid_params(igt_pipe_t *pipe,
ioc.props_ptr = (uintptr_t) props_raw;
ioc.prop_values_ptr = (uintptr_t) values_raw;
- /* Valid pointers, but still should copy nothing. */
+ /* Valid pointers, but still should copy nothing */
do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
- /* Valid noop, but with event set should fail. */
+ /* Valid noop, but with event set should fail */
ioc.flags = DRM_MODE_PAGE_FLIP_EVENT;
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
- /* Nonsense flags. */
+ /* Nonsense flags */
ioc.flags = 0xdeadbeef;
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
ioc.flags = 0;
- /* Safety check that flags is reset properly. */
+ /* Safety check that flags is reset properly */
do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
- /* Reserved/MBZ. */
+ /* Reserved/MBZ */
ioc.reserved = 1;
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EINVAL);
ioc.reserved = 0;
do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
- /* Zero is not a valid object ID. */
+ /* Zero is not a valid object ID */
ioc.count_objs = ARRAY_SIZE(obj_raw);
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
- /* Invalid object type (not a thing we can set properties on). */
+ /* Invalid object type (not a thing we can set properties on) */
ioc.count_objs = 1;
obj_raw[0] = pipe->values[IGT_CRTC_MODE_ID];
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
obj_raw[0] = fb->fb_id;
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
- /* Filled object but with no properties; no-op. */
+ /* Filled object but with no properties; no-op */
for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
obj_raw[i] = pipe->crtc_id;
do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
- /* Pass in all sorts of things other than the property ID. */
+ /* Pass in all sorts of things other than the property ID */
num_props_raw[0] = 1;
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
props_raw[0] = pipe->crtc_id;
@@ -1006,22 +1016,21 @@ static void atomic_invalid_params(igt_pipe_t *pipe,
props_raw[0] = pipe->values[IGT_CRTC_MODE_ID];
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
- /* Valid property, valid value. */
-
+ /* Valid property, valid value */
for (i = 0; i < ARRAY_SIZE(props_raw); i++) {
props_raw[i] = pipe->props[IGT_CRTC_MODE_ID];
values_raw[i] = pipe->values[IGT_CRTC_MODE_ID];
}
do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
- /* Setting the same thing multiple times is OK. */
+ /* Setting the same thing multiple times is OK */
for (i = 0; i < ARRAY_SIZE(obj_raw); i++)
num_props_raw[i] = ARRAY_SIZE(props_raw) / ARRAY_SIZE(obj_raw);
do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
ioc.count_objs = ARRAY_SIZE(obj_raw);
do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
- /* Pass a series of outlandish addresses. */
+ /* Pass a series of outlandish addresses */
ioc.objs_ptr = 0;
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, EFAULT);
@@ -1040,7 +1049,7 @@ static void atomic_invalid_params(igt_pipe_t *pipe,
ioc.prop_values_ptr = (uintptr_t) values_raw;
do_ioctl(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc);
- /* Attempt to overflow and/or trip various boundary conditions. */
+ /* Attempt to overflow and/or trip various boundary conditions */
ioc.count_objs = UINT32_MAX / sizeof(uint32_t);
do_ioctl_err(display->drm_fd, DRM_IOCTL_MODE_ATOMIC, &ioc, ENOENT);
@@ -1079,10 +1088,10 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
fb->height/2, 1.0, 1.0, 1.0);
igt_put_cairo_ctx(cr_1);
- /*
- * Flip the primary plane to new color fb using atomic API and check the
- * state.
- */
+ /*
+ * Flip the primary plane to new color fb using atomic API and check the
+ * state.
+ */
igt_plane_set_fb(plane, &fb_1);
crtc_commit(pipe, plane, COMMIT_ATOMIC, ATOMIC_RELAX_NONE);
@@ -1138,7 +1147,7 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
* NOTE: This will result in no update on plane as damage is outside, so
* will see no change on the screen.
*/
- /* Reszie fb_1 to be bigger than plane */
+ /* Resize fb_1 to be bigger than plane */
igt_remove_fb(pipe->display->drm_fd, &fb_1);
igt_create_color_fb(pipe->display->drm_fd, fb->width * 2, fb->height,
fb->drm_format, I915_TILING_NONE, 0.2, 0.2, 0.2,
@@ -1263,8 +1272,10 @@ static void atomic_plane_damage(igt_pipe_t *pipe, igt_plane_t *plane, struct igt
igt_remove_fb(pipe->display->drm_fd, &fb_2);
}
-static void atomic_setup(igt_display_t *display, enum pipe pipe, igt_output_t *output, igt_plane_t *primary, struct igt_fb *fb)
+static void atomic_setup(igt_display_t *display, enum pipe pipe, igt_output_t *output,
+ igt_plane_t *primary, struct igt_fb *fb)
{
+ igt_display_reset(display);
igt_output_set_pipe(output, pipe);
igt_plane_set_fb(primary, fb);
@@ -1296,9 +1307,7 @@ igt_main
igt_fixture {
display.drm_fd = drm_open_driver_master(DRIVER_ANY);
-
kmstest_set_vt_graphics_mode();
-
igt_display_require(&display, display.drm_fd);
igt_require(display.is_atomic);
igt_display_require_output(&display);
@@ -1308,133 +1317,144 @@ igt_main
pipe_obj = &display.pipes[pipe];
primary = igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_PRIMARY);
-
mode = igt_output_get_mode(output);
-
igt_create_pattern_fb(display.drm_fd,
mode->hdisplay, mode->vdisplay,
plane_get_igt_format(primary),
DRM_FORMAT_MOD_LINEAR, &fb);
}
- igt_describe("Test for KMS atomic modesetting on overlay plane and ensure coherency between "
- "the legacy and atomic interfaces.");
- igt_subtest("plane-overlay-legacy") {
- igt_plane_t *overlay =
- igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
-
- igt_require(overlay);
+ igt_describe("Test for KMS atomic modesetting on overlay plane and ensure "
+ "coherency between the legacy and atomic interfaces.");
+ igt_subtest_with_dynamic("plane-overlay-legacy") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ igt_plane_t *overlay =
+ igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
+ igt_require(overlay);
- atomic_setup(&display, pipe, output, primary, &fb);
- plane_overlay(pipe_obj, output, overlay);
+ atomic_setup(&display, pipe, output, primary, &fb);
+ plane_overlay(pipe_obj, output, overlay);
+ }
}
- igt_describe("Test for KMS atomic modesetting on primary plane and ensure coherency between "
- "the legacy and atomic interfaces.");
- igt_subtest("plane-primary-legacy") {
- atomic_setup(&display, pipe, output, primary, &fb);
-
- plane_primary(pipe_obj, primary, &fb);
+ igt_describe("Test for KMS atomic modesetting on primary plane and ensure "
+ "coherency between the legacy and atomic interfaces.");
+ igt_subtest_with_dynamic("plane-primary-legacy") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&display, pipe, output, primary, &fb);
+ plane_primary(pipe_obj, primary, &fb);
+ }
}
- igt_describe("Verify that the overlay plane can cover the primary one (and "\
- "vice versa) by changing their zpos property.");
- igt_subtest("plane-primary-overlay-mutable-zpos") {
- uint32_t format_primary = DRM_FORMAT_ARGB8888;
- uint32_t format_overlay = DRM_FORMAT_ARGB1555;
+ igt_describe("Test to verify that the overlay plane can cover the primary "
+ "plane (and vice versa) by changing their zpos property.");
+ igt_subtest_with_dynamic("plane-primary-overlay-mutable-zpos") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ uint32_t format_primary = DRM_FORMAT_ARGB8888;
+ uint32_t format_overlay = DRM_FORMAT_ARGB1555;
- igt_plane_t *overlay =
- igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
- igt_require(overlay);
+ igt_plane_t *overlay =
+ igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_OVERLAY);
+ igt_require(overlay);
- igt_require(igt_plane_has_prop(primary, IGT_PLANE_ZPOS));
- igt_require(igt_plane_has_prop(overlay, IGT_PLANE_ZPOS));
+ igt_require(igt_plane_has_prop(primary, IGT_PLANE_ZPOS));
+ igt_require(igt_plane_has_prop(overlay, IGT_PLANE_ZPOS));
- igt_require(igt_plane_has_format_mod(primary, format_primary, 0x0));
- igt_require(igt_plane_has_format_mod(overlay, format_overlay, 0x0));
+ igt_require(igt_plane_has_format_mod(primary, format_primary, 0x0));
+ igt_require(igt_plane_has_format_mod(overlay, format_overlay, 0x0));
- igt_output_set_pipe(output, pipe);
- plane_primary_overlay_mutable_zpos(pipe_obj, output, primary, overlay,
- format_primary, format_overlay);
+ igt_display_reset(&display);
+ igt_output_set_pipe(output, pipe);
+ plane_primary_overlay_mutable_zpos(pipe_obj, output, primary, overlay,
+ format_primary, format_overlay);
+ }
}
- igt_describe("Verify the reported zpos property of planes by making sure "\
+ igt_describe("Test to verify the reported zpos property of planes by making sure "\
"only higher zpos planes cover the lower zpos ones.");
- igt_subtest("plane-immutable-zpos") {
- igt_output_set_pipe(output, pipe);
- plane_immutable_zpos(&display, pipe_obj, output);
+ igt_subtest_with_dynamic("plane-immutable-zpos") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ igt_display_reset(&display);
+ igt_output_set_pipe(output, pipe);
+ plane_immutable_zpos(&display, pipe_obj, output);
+ }
}
- igt_describe("Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY really only touches "
+ igt_describe("Test to ensure that DRM_MODE_ATOMIC_TEST_ONLY touches only "
"the free-standing state objects and nothing else.");
- igt_subtest("test-only") {
- atomic_clear(&display, pipe, primary, output);
-
- test_only(pipe_obj, primary, output);
+ igt_subtest_with_dynamic("test-only") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_clear(&display, pipe, primary, output);
+ test_only(pipe_obj, primary, output);
+ }
}
- igt_describe("Test for KMS atomic modesetting on cursor plane and ensure coherency between "
- "legacy and atomic interfaces.");
- igt_subtest("plane-cursor-legacy") {
- igt_plane_t *cursor =
- igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_CURSOR);
-
- igt_require(cursor);
-
- atomic_setup(&display, pipe, output, primary, &fb);
- plane_cursor(pipe_obj, output, cursor);
+ igt_describe("Test for KMS atomic modesetting on cursor plane and ensure "
+ "coherency between legacy and atomic interfaces.");
+ igt_subtest_with_dynamic("plane-cursor-legacy") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ igt_plane_t *cursor =
+ igt_pipe_get_plane_type(pipe_obj, DRM_PLANE_TYPE_CURSOR);
+ igt_require(cursor);
+ atomic_setup(&display, pipe, output, primary, &fb);
+ plane_cursor(pipe_obj, output, cursor);
+ }
}
- igt_describe("Test error handling when invalid plane parameters are passed");
- igt_subtest("plane-invalid-params") {
- atomic_setup(&display, pipe, output, primary, &fb);
-
- plane_invalid_params(pipe_obj, output, primary, &fb);
+ igt_describe("Test error handling when invalid plane parameters are passed.");
+ igt_subtest_with_dynamic("plane-invalid-params") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&display, pipe, output, primary, &fb);
+ plane_invalid_params(pipe_obj, output, primary, &fb);
+ }
}
- igt_describe("Test error handling when invalid plane fence parameters are passed");
- igt_subtest("plane-invalid-params-fence") {
- atomic_setup(&display, pipe, output, primary, &fb);
-
- plane_invalid_params_fence(pipe_obj, output, primary);
+ igt_describe("Test error handling when invalid plane fence parameters are passed.");
+ igt_subtest_with_dynamic("plane-invalid-params-fence") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&display, pipe, output, primary, &fb);
+ plane_invalid_params_fence(pipe_obj, output, primary);
+ }
}
- igt_describe("Test error handling when invalid crtc parameters are passed");
- igt_subtest("crtc-invalid-params") {
- atomic_setup(&display, pipe, output, primary, &fb);
-
- crtc_invalid_params(pipe_obj, output, primary, &fb);
+ igt_describe("Test error handling when invalid crtc parameters are passed.");
+ igt_subtest_with_dynamic("crtc-invalid-params") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&display, pipe, output, primary, &fb);
+ crtc_invalid_params(pipe_obj, output, primary, &fb);
+ }
}
- igt_describe("Test error handling when invalid crtc fence parameters are passed");
- igt_subtest("crtc-invalid-params-fence") {
- atomic_setup(&display, pipe, output, primary, &fb);
-
- crtc_invalid_params_fence(pipe_obj, output, primary, &fb);
+ igt_describe("Test error handling when invalid crtc fence parameters are passed.");
+ igt_subtest_with_dynamic("crtc-invalid-params-fence") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&display, pipe, output, primary, &fb);
+ crtc_invalid_params_fence(pipe_obj, output, primary, &fb);
+ }
}
- igt_describe("Test abuse the atomic ioctl directly in order to test "
- "various invalid conditions which the libdrm wrapper won't "
+ igt_describe("Test abuses the atomic ioctl directly in order to test "
+ "various invalid conditions which libdrm wrapper won't "
"allow us to create.");
- igt_subtest("atomic-invalid-params") {
- atomic_setup(&display, pipe, output, primary, &fb);
-
- atomic_invalid_params(pipe_obj, primary, output, &fb);
+ igt_subtest_with_dynamic("atomic-invalid-params") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ atomic_setup(&display, pipe, output, primary, &fb);
+ atomic_invalid_params(pipe_obj, primary, output, &fb);
+ }
}
- igt_describe("Simple test cases to use FB_DAMAGE_CLIPS plane property");
- igt_subtest("atomic_plane_damage") {
- igt_require(igt_plane_has_prop(primary, IGT_PLANE_FB_DAMAGE_CLIPS));
-
- atomic_setup(&display, pipe, output, primary, &fb);
-
- atomic_plane_damage(pipe_obj, primary, &fb);
+ igt_describe("Test case to use FB_DAMAGE_CLIPS plane property.");
+ igt_subtest_with_dynamic("atomic-plane-damage") {
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), igt_output_name(output)) {
+ igt_require(igt_plane_has_prop(primary, IGT_PLANE_FB_DAMAGE_CLIPS));
+ atomic_setup(&display, pipe, output, primary, &fb);
+ atomic_plane_damage(pipe_obj, primary, &fb);
+ }
}
igt_fixture {
atomic_clear(&display, pipe, primary, output);
igt_remove_fb(display.drm_fd, &fb);
-
igt_display_fini(&display);
}
}
--
2.25.1
More information about the igt-dev
mailing list