[igt-dev] [PATCH i-g-t v4 4/5] tests/xe: Add a test that validates residency during s2idle
Riana Tauro
riana.tauro at intel.com
Fri Aug 11 11:22:22 UTC 2023
During s2idle, the device is powered up and GT C6 enabled
so we expect the residency to increase across suspend.
Add a test that validates the residency over a s2idle cycle
and checks if it is greater than the autoresume delay
or within tolerance.
v2: skip d3cold disable for igfx (Anshuman)
v3: rename test flag to TEST_IDLE
reorder variables (Anshuman)
v4: check if residency is greater than autoresume delay as
expected. Assert only if residency is lesser than autoresume
delay and not within tolerance.
Signed-off-by: Riana Tauro <riana.tauro at intel.com>
---
tests/xe/xe_pm_residency.c | 58 ++++++++++++++++++++++++++++++++++----
1 file changed, 53 insertions(+), 5 deletions(-)
diff --git a/tests/xe/xe_pm_residency.c b/tests/xe/xe_pm_residency.c
index 4936de166..fd4876eaf 100644
--- a/tests/xe/xe_pm_residency.c
+++ b/tests/xe/xe_pm_residency.c
@@ -10,8 +10,10 @@
* Functionality: GT C States
* Test category: functionality test
*/
+#include <limits.h>
#include "igt.h"
+#include "igt_device.h"
#include "igt_sysfs.h"
#include "xe/xe_query.h"
@@ -29,6 +31,11 @@ const double tolerance = 0.1;
(tol) * 100.0, (tol) * 100.0, \
(double)(ref))
+enum test_type {
+ TEST_S2IDLE,
+ TEST_IDLE,
+};
+
/**
* SUBTEST: gt-c6-on-idle
* Description: Validate GT C6 state on idle
@@ -38,6 +45,11 @@ const double tolerance = 0.1;
* Description: basic residency test to validate idle residency
* measured over a time interval is within the tolerance
* Run type: FULL
+ *
+ * SUBTEST: gt-c6-freeze
+ * Description: Validate idle residency measured over suspend(s2idle)
+ * is greater than suspend time or within tolerance
+ * Run type: FULL
*/
IGT_TEST_DESCRIPTION("Tests for gtidle properties");
@@ -69,15 +81,35 @@ static unsigned long read_idle_residency(int fd, int gt)
return residency;
}
-static void test_idle_residency(int fd, int gt)
+static void test_idle_residency(int fd, int gt, enum test_type flag)
{
unsigned long elapsed_ms, residency_start, residency_end;
igt_assert_f(igt_wait(xe_is_gt_in_c6(fd, gt), 1000, 1), "GT not in C6\n");
- residency_start = read_idle_residency(fd, gt);
- elapsed_ms = measured_usleep(SLEEP_DURATION * 1000) / 1000;
- residency_end = read_idle_residency(fd, gt);
+ if (flag == TEST_S2IDLE) {
+ /*
+ * elapsed time during suspend is approximately equal to autoresume delay
+ * when a full suspend cycle(SUSPEND_TEST_NONE) is used.
+ */
+ elapsed_ms = igt_get_autoresume_delay(SUSPEND_STATE_FREEZE);
+ residency_start = read_idle_residency(fd, gt);
+ igt_system_suspend_autoresume(SUSPEND_STATE_FREEZE, SUSPEND_TEST_NONE);
+ residency_end = read_idle_residency(fd, gt);
+
+ /*
+ * Idle residency may increase even after suspend, only assert if residency
+ * is lesser than autoresume delay and is not within tolerance.
+ */
+ if ((residency_end - residency_start) >= elapsed_ms)
+ return;
+ }
+
+ if (flag == TEST_IDLE) {
+ residency_start = read_idle_residency(fd, gt);
+ elapsed_ms = measured_usleep(SLEEP_DURATION * 1000) / 1000;
+ residency_end = read_idle_residency(fd, gt);
+ }
igt_info("Measured %lums of idle residency in %lums\n",
residency_end - residency_start, elapsed_ms);
@@ -87,7 +119,9 @@ static void test_idle_residency(int fd, int gt)
igt_main
{
+ uint32_t d3cold_allowed;
int fd, gt;
+ char pci_slot_name[NAME_MAX];
igt_fixture {
fd = drm_open_driver(DRIVER_XE);
@@ -99,10 +133,24 @@ igt_main
xe_for_each_gt(fd, gt)
igt_assert_f(igt_wait(xe_is_gt_in_c6(fd, gt), 1000, 1), "GT not in C6\n");
+ igt_describe("Validate idle residency measured over suspend cycle is within the tolerance");
+ igt_subtest("gt-c6-freeze") {
+ if (xe_has_vram(fd)) {
+ igt_device_get_pci_slot_name(fd, pci_slot_name);
+ igt_pm_get_d3cold_allowed(pci_slot_name, &d3cold_allowed);
+ igt_pm_set_d3cold_allowed(pci_slot_name, 0);
+ }
+ xe_for_each_gt(fd, gt)
+ test_idle_residency(fd, gt, TEST_S2IDLE);
+
+ if (xe_has_vram(fd))
+ igt_pm_set_d3cold_allowed(pci_slot_name, d3cold_allowed);
+ }
+
igt_describe("Validate idle residency measured over a time interval is within the tolerance");
igt_subtest("idle-residency")
xe_for_each_gt(fd, gt)
- test_idle_residency(fd, gt);
+ test_idle_residency(fd, gt, TEST_IDLE);
igt_fixture {
close(fd);
--
2.40.0
More information about the igt-dev
mailing list