[igt-dev] [PATCH i-g-t v2] README.md and docs: describe how to document tests

Thu Aug 17 16:24:14 UTC 2023

Hi Mauro,

On Thu-17-08-2023 07:03 pm, Mauro Carvalho Chehab wrote:
> From: Mauro Carvalho Chehab <mchehab at kernel.org>
> 
> Add some documentation describing how to document tests,
> with both the legacy way and via testplan.

Revision history is missing.

> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab at kernel.org>
> ---
>   README.md                  |   6 +-
>   docs/test_documentation.md | 179 +++++++++++++++++++++++++++++++++++++
>   2 files changed, 184 insertions(+), 1 deletion(-)
>   create mode 100644 docs/test_documentation.md
> 
> diff --git a/README.md b/README.md
> index 66f2bc0fa1bd..efa525b041c0 100644
> --- a/README.md
> +++ b/README.md
> @@ -49,6 +49,10 @@ Documentation is built using
>   
>       $ ninja -C build igt-gpu-tools-doc
>   
> +Please notice that some drivers and test sets may require that all
> +tests to be properly documented via testplan. By default, build
> +will fail if one forgets to document or update the documentation.
> +This is currently enabled for the Xe, i915 drivers and for KMS tests.

I think it would be better to have a link (to test_documentation.md) to 
know more about the documentation.

Otherwise, LGTM.
Acked-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>

>   
>   Running Tests
>   -------------
> @@ -164,7 +168,7 @@ was used to generate them.
>   Imported i915_drm.h uapi headers from airlied's drm-next branch.
>   
>   In some cases updating a single uapi file is needed as our history
> -shows. So in this case, it should be done by:
> +shows. In this case, it should be done by:
>   
>       # From the kernel dir with a drm/drm-next commit checked out:
>       $ make INSTALL_HDR_PATH=<dest-dir> headers_install
> diff --git a/docs/test_documentation.md b/docs/test_documentation.md
> new file mode 100644
> index 000000000000..f21bf69def16
> --- /dev/null
> +++ b/docs/test_documentation.md
> @@ -0,0 +1,179 @@
> +IGT Test documentation
> +======================
> +
> +Legacy way
> +----------
> +
> +IGT has been providing a way to document tests in runtime by using tree macros:
> +
> +    - IGT_TEST_DESCRIPTION(test_file_description)
> +    - igt_describe(subtest_description) and igt_describe_f(format, args...)
> +
> +This is limited, as:
> +    - Each test/subtest has just one “field”: description. So, it doesn't
> +      allow specifying what features are tested and/or special requirements;
> +    - It is meant to produce a very concise documentation;
> +    - Integration with external platforms to group tests per category
> +      is not possible, as there's no way to tell what category each test
> +      belongs;
> +    - Format is not easily expansible;
> +    - The build system doesn’t verify if all tests are documented. So,
> +      documentation tends to be outdated or forgotten, as new patches
> +      modify the test set.
> +
> +Documentation via structured comments (testplan)
> +------------------------------------------------
> +
> +With the addition of Xe driver, a new way to document tests was added.
> +It is based on special comment-like annotation inside the C code.
> +
> +It was written to be flexible, so the valid fields to be used by is
> +described on a JSON configuration file. That makes easy to add/modify
> +the fields as needed. It is also easy to use the documentation to
> +integrate with external reporting tools.
> +
> +As an additional benefit, the documentation tags will be generating a
> +Restructured Text file. So, it is possible to add enriched test
> +descriptions if needed.
> +
> +Also, the build system can optionally enforce a check at build time to
> +verify if the documentation is in place.
> +
> +testplan configuration file
> +---------------------------
> +
> +The configuration file contains the fields to be used for documenting
> +tests, and the test names. It may also mark a property as mandatory.
> +
> +A typical example is:
> +
> +```
> +{
> +    "description": "JSON example file",
> +    "name": "Tests for XYZ Driver",
> +    "files": [ "test.c" ],
> +    "fields": {
> +        "Feature": {
> +            "_properties_": {
> +                "description": "Feature to be tested"
> +            }
> +        },
> +        "Description" : {
> +            "_properties_": {
> +                "mandatory": true,
> +                "description": "Provides a description for the test/subtest."
> +            }
> +        }
> +    }
> +}
> +```
> +
> +Documenting tests via testplan
> +------------------------------
> +
> +A typical documentation markup at the test source code looks like:
> +```
> +/**
> + * TEST: Check if new IGT test documentation logic functionality is working
> + * Mega-feature: IGT test documentation
> + * Category: Software build block
> + * Sub-category: documentation
> + * Functionality: test documentation
> + * Issue: none
> + * Description: Complete description of this test
> + *
> + * SUBTEST: foo
> + * Description: do foo things.
> + *      Foo description continuing on another line
> + *
> + * SUBTEST: bar
> + * Description:
> + *      Do bar things.
> + *      Bar description continuing on another line
> + */
> +```
> +
> +It is also possible to add variables to the documentation with:
> +
> +```
> +/**
> + * SUBTEST: test-%s-binds-with-%ld-size-%s
> + * Description: Test arg[3] arg[1] binds with arg[2] size
> + *
> + * SUBTEST: test-%s-%ld-size
> + * Description: Test arg[1] with %arg[2] size
> + *
> + * arg[1]:
> + *
> + * @large:      large
> + *              something
> + * @small:      small
> + *              something
> + *
> + * arg[2]:      buffer size
> + *
> + * arg[3]:
> + *
> + * @misaligned-binds:           misaligned
> + * @userptr-binds:              user pointer
> + */
> + ```
> +
> +The first "%s" will be replaced by the values of arg[1] for the subtest
> +name. At the description, arg[1] will be replaced by the string after
> +the field description. The same applies to the subsequent wildcards.
> +
> +So, the above will produce the following output (using the example
> +configuration file described at the past session:
> +
> +```
> +``igt at test@test-large-<buffer size>-size``
> +
> +:Description: Test large something with <buffer size> size
> +
> +
> +``igt at test@test-large-binds-with-<buffer size>-size-misaligned-binds``
> +
> +:Description: Test misaligned large something binds with <buffer size> size
> +
> +
> +``igt at test@test-small-binds-with-<buffer size>-size-misaligned-binds``
> +
> +:Description: Test misaligned small something binds with <buffer size> size
> +
> +
> +``igt at test@test-small-<buffer size>-size``
> +
> +:Description: Test small something with <buffer size> size
> +
> +
> +``igt at test@test-large-binds-with-<buffer size>-size-userptr-binds``
> +
> +:Description: Test user pointer large something binds with <buffer size> size
> +
> +
> +``igt at test@test-small-binds-with-<buffer size>-size-userptr-binds``
> +
> +:Description: Test user pointer small something binds with <buffer size> size
> +```
> +
> +Wildcard replacement can also be used to maintain an argument with the
> +same name at the replaced description. That makes easy to document
> +numeric arguments with a fixed testset, like:
> +
> +```
> +/**
> + * SUBTEST: unbind-all-%d-vmas
> + * Description: unbind all with %arg[1] VMAs
> + *
> + * arg[1].values: 2, 8
> + * arg[1].values: 16, 32
> + */
> +
> +/**
> + * SUBTEST: unbind-all-%d-vmas
> + * Description: unbind all with %arg[1] VMAs
> + *
> + * arg[1].values: 64, 128
> + */
> +```