[igt-dev] [PATCH i-g-t] tests/kms_lease: Terminate lease fd before subtests execution

Nautiyal, Ankit K ankit.k.nautiyal at intel.com
Fri Aug 18 09:32:42 UTC 2023


On 8/14/2023 9:44 PM, Mohammed Thasleem wrote:
> Failures happen at drmModeSetCursor and prepare_crtc_master or
> prepare_crtc_lease which exit tests without termination of lease fd
> which resulting in resource busy for sub-sequence execution, when
> new lessor request for lease.
>
> Terminate the lease fd when any assert happen with out termination
> of lease fd and on any drmModeSetCrtc or drmModeGetCrtc exit.
> Terminate lease fd on every display dependent subtests execution.
>
> v2: -Separated prepare crtc for master and lease.
>      -Removed lease_t from all sub-tests.
> v3: Updated commit message.
> v4: Avoid duplicating prepare_crtc.
>
> Signed-off-by: Mohammed Thasleem <mohammed.thasleem at intel.com>
> ---
>   tests/kms_lease.c | 130 +++++++++++++++++++++++-----------------------
>   1 file changed, 64 insertions(+), 66 deletions(-)
>
> diff --git a/tests/kms_lease.c b/tests/kms_lease.c
> index c8ae98206..9823e9265 100644
> --- a/tests/kms_lease.c
> +++ b/tests/kms_lease.c
> @@ -57,6 +57,7 @@ typedef struct {
>   } lease_t;
>   
>   typedef struct {
> +	lease_t lease;
>   	lease_t master;
>   	enum pipe pipe;
>   	uint32_t crtc_id;
> @@ -72,9 +73,10 @@ static igt_output_t *connector_id_to_output(igt_display_t *display, uint32_t con
>   	return igt_output_from_connector(display, &connector);
>   }
>   
> -static int prepare_crtc(lease_t *lease, data_t *data)
> +static int prepare_crtc(data_t *data, bool is_master)
>   {
>   	drmModeModeInfo *mode;
> +	lease_t *lease = is_master ? &data->master : &data->lease;
>   	igt_display_t *display = &lease->display;
>   	igt_output_t *output = connector_id_to_output(display, data->connector_id);
>   	enum pipe pipe = display->pipes[data->pipe].pipe;
> @@ -94,7 +96,6 @@ static int prepare_crtc(lease_t *lease, data_t *data)
>   			    DRM_FORMAT_MOD_LINEAR,
>   			    0.0, 0.0, 0.0,
>   			    &lease->primary_fb);
> -


Undo remove line here


>   	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
>   	igt_plane_set_fb(primary, &lease->primary_fb);
>   
> @@ -160,7 +161,7 @@ static int get_lease(int fd, struct drm_mode_get_lease *mgl)
>   	return err;
>   }
>   
> -static int make_lease(data_t *data, lease_t *lease)
> +static int make_lease(data_t *data)
>   {
>   	uint32_t object_ids[3];
>   	struct drm_mode_create_lease mcl;
> @@ -176,12 +177,12 @@ static int make_lease(data_t *data, lease_t *lease)
>   	object_ids[mcl.object_count++] = data->plane_id;
>   
>   	ret = create_lease(data->master.fd, &mcl);
> +	data->lease.fd = mcl.fd;
>   
>   	if (ret)
>   		return ret;
>   
> -	lease->fd = mcl.fd;
> -	lease->lessee_id = mcl.lessee_id;
> +	data->lease.lessee_id = mcl.lessee_id;
>   	return 0;
>   }
>   
> @@ -216,24 +217,23 @@ static void simple_lease(data_t *data)
>   {
>   	enum pipe pipe = data->pipe;
>   
> -	lease_t lease;
> -
>   	/* Create a valid lease */
> -	igt_assert_eq(make_lease(data, &lease), 0);
> +	igt_assert_eq(make_lease(data), 0);
>   
> -	igt_display_require(&lease.display, lease.fd);
> +	igt_display_require(&data->lease.display, data->lease.fd);
>   
>   	/* Set a mode on the leased output */
> -	igt_assert_eq(0, prepare_crtc(&lease, data));
> +	igt_assert_eq(0, prepare_crtc(data, false));
>   
>   	/* Paint something attractive */
> -	paint_fb(lease.fd, &lease.primary_fb, "simple_lease",
> -		 lease.mode->name, igt_output_name(lease.output), kmstest_pipe_name(pipe));
> +	paint_fb(data->lease.fd, &data->lease.primary_fb, "simple_lease",
> +		 data->lease.mode->name, igt_output_name(data->lease.output),
> +		 kmstest_pipe_name(pipe));
>   	igt_debug_wait_for_keypress("lease");
> -	cleanup_crtc(&lease,
> -		     connector_id_to_output(&lease.display, data->connector_id));
> +	cleanup_crtc(&data->lease,
> +		     connector_id_to_output(&data->lease.display, data->connector_id));
>   
> -	terminate_lease(&lease);
> +	terminate_lease(&data->lease);
>   }
>   
>   static void empty_lease(data_t *data)
> @@ -275,10 +275,11 @@ static void page_flip_implicit_plane(data_t *data)
>   
>   	drmSetClientCap(data->master.fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 0);
>   	do_or_die(create_lease(data->master.fd, &mcl));
> +	data->lease.fd = mcl.fd;
>   	drmSetClientCap(data->master.fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 1);
>   
>   	/* Set a mode on the leased output */
> -	igt_assert_eq(0, prepare_crtc(&data->master, data));
> +	igt_assert_eq(0, prepare_crtc(data, true));
>   
>   	/* sanity check */
>   	do_or_die(drmModePageFlip(data->master.fd, data->crtc_id,
> @@ -344,6 +345,7 @@ static void setcrtc_implicit_plane(data_t *data)
>   
>   	drmSetClientCap(data->master.fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 0);
>   	do_or_die(create_lease(data->master.fd, &mcl));
> +	data->lease.fd = mcl.fd;
>   	drmSetClientCap(data->master.fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 1);


There are other places too where create_lease() is called to create 
lease and we need to store the lease.fd

I wonder if we can create a wrapper to create_lease() and store mcl.fd 
in data->lease.fd.


Regards,

Ankit

>   
>   	/*
> @@ -355,7 +357,7 @@ static void setcrtc_implicit_plane(data_t *data)
>   	}
>   
>   	/* Set a mode on the leased output */
> -	igt_assert_eq(0, prepare_crtc(&data->master, data));
> +	igt_assert_eq(0, prepare_crtc(data, true));
>   
>   	/* sanity check */
>   	ret = drmModeSetCrtc(data->master.fd, data->crtc_id, -1,
> @@ -368,6 +370,7 @@ static void setcrtc_implicit_plane(data_t *data)
>   
>   	object_ids[mcl.object_count++] = wrong_plane_id;
>   	do_or_die(create_lease(data->master.fd, &mcl));
> +	data->lease.fd = mcl.fd;
>   
>   	igt_assert_eq(drmModeSetCrtc(mcl.fd, data->crtc_id, -1,
>   				     0, 0, object_ids, 1, mode),
> @@ -395,10 +398,11 @@ static void cursor_implicit_plane(data_t *data)
>   
>   	drmSetClientCap(data->master.fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 0);
>   	do_or_die(create_lease(data->master.fd, &mcl));
> +	data->lease.fd = mcl.fd;
>   	drmSetClientCap(data->master.fd, DRM_CLIENT_CAP_UNIVERSAL_PLANES, 1);
>   
>   	/* Set a mode on the leased output */
> -	igt_assert_eq(0, prepare_crtc(&data->master, data));
> +	igt_assert_eq(0, prepare_crtc(data, true));
>   
>   	/* sanity check */
>   	do_or_die(drmModeSetCursor(data->master.fd, data->crtc_id, 0, 0, 0));
> @@ -408,6 +412,7 @@ static void cursor_implicit_plane(data_t *data)
>   	/* primary plane is never the cursor */
>   	object_ids[mcl.object_count++] = data->plane_id;
>   	do_or_die(create_lease(data->master.fd, &mcl));
> +	data->lease.fd = mcl.fd;
>   
>   	igt_assert_eq(drmModeSetCursor(mcl.fd, data->crtc_id, 0, 0, 0),
>   		      -EACCES);
> @@ -415,7 +420,7 @@ static void cursor_implicit_plane(data_t *data)
>   
>   	cleanup_crtc(&data->master,
>   		     connector_id_to_output(&data->master.display, data->connector_id));
> -}
> +	}
>   
>   static void atomic_implicit_crtc(data_t *data)
>   {
> @@ -470,6 +475,7 @@ static void atomic_implicit_crtc(data_t *data)
>   	igt_assert(crtc_id_prop);
>   
>   	do_or_die(create_lease(data->master.fd, &mcl));
> +	data->lease.fd = mcl.fd;
>   	do_or_die(drmSetClientCap(mcl.fd, DRM_CLIENT_CAP_ATOMIC, 1));
>   
>   	/* check CRTC_ID property on the plane */
> @@ -508,19 +514,18 @@ static void atomic_implicit_crtc(data_t *data)
>   /* Test listing lessees */
>   static void lessee_list(data_t *data)
>   {
> -	lease_t lease;
>   	struct drm_mode_list_lessees mll;
>   	uint32_t lessees[1];
>   
>   	mll.pad = 0;
>   
>   	/* Create a valid lease */
> -	igt_assert_eq(make_lease(data, &lease), 0);
> +	igt_assert_eq(make_lease(data), 0);
>   
>   	/* check for nested leases */
>   	mll.count_lessees = 0;
>   	mll.lessees_ptr = 0;
> -	igt_assert_eq(list_lessees(lease.fd, &mll), 0);
> +	igt_assert_eq(list_lessees(data->lease.fd, &mll), 0);
>   	igt_assert_eq(mll.count_lessees, 0);
>   
>   	/* Get the number of lessees */
> @@ -542,14 +547,14 @@ static void lessee_list(data_t *data)
>   	igt_assert_eq(mll.count_lessees, 1);
>   
>   	/* Make sure the listed lease is the same as the one we created */
> -	igt_assert_eq(lessees[0], lease.lessee_id);
> +	igt_assert_eq(lessees[0], data->lease.lessee_id);
>   
>   	/* invalid pad */
>   	mll.pad = -1;
>   	igt_assert_eq(list_lessees(data->master.fd, &mll), -EINVAL);
>   	mll.pad = 0;
>   
> -	terminate_lease(&lease);
> +	terminate_lease(&data->lease);
>   
>   	/* Make sure the lease is gone */
>   	igt_assert_eq(list_lessees(data->master.fd, &mll), 0);
> @@ -559,7 +564,6 @@ static void lessee_list(data_t *data)
>   /* Test getting the contents of a lease */
>   static void lease_get(data_t *data)
>   {
> -	lease_t lease;
>   	struct drm_mode_get_lease mgl;
>   	int num_leased_obj = 3;
>   	uint32_t objects[num_leased_obj];
> @@ -568,12 +572,12 @@ static void lease_get(data_t *data)
>   	mgl.pad = 0;
>   
>   	/* Create a valid lease */
> -	igt_assert_eq(make_lease(data, &lease), 0);
> +	igt_assert_eq(make_lease(data), 0);
>   
>   	/* Get the number of objects */
>   	mgl.count_objects = 0;
>   	mgl.objects_ptr = 0;
> -	igt_assert_eq(get_lease(lease.fd, &mgl), 0);
> +	igt_assert_eq(get_lease(data->lease.fd, &mgl), 0);
>   
>   	/* Make sure it's 2 */
>   	igt_assert_eq(mgl.count_objects, num_leased_obj);
> @@ -581,7 +585,7 @@ static void lease_get(data_t *data)
>   	/* Get the objects */
>   	mgl.objects_ptr = (uint64_t) (uintptr_t) objects;
>   
> -	igt_assert_eq(get_lease(lease.fd, &mgl), 0);
> +	igt_assert_eq(get_lease(data->lease.fd, &mgl), 0);
>   
>   	/* Make sure it's 2 */
>   	igt_assert_eq(mgl.count_objects, num_leased_obj);
> @@ -607,28 +611,27 @@ static void lease_get(data_t *data)
>   
>   	/* invalid pad */
>   	mgl.pad = -1;
> -	igt_assert_eq(get_lease(lease.fd, &mgl), -EINVAL);
> +	igt_assert_eq(get_lease(data->lease.fd, &mgl), -EINVAL);
>   	mgl.pad = 0;
>   
>   	/* invalid pointer */
>   	mgl.objects_ptr = 0;
> -	igt_assert_eq(get_lease(lease.fd, &mgl), -EFAULT);
> +	igt_assert_eq(get_lease(data->lease.fd, &mgl), -EFAULT);
>   
> -	terminate_lease(&lease);
> +	terminate_lease(&data->lease);
>   }
>   
>   static void lease_unleased_crtc(data_t *data)
>   {
> -	lease_t lease;
>   	enum pipe p;
>   	uint32_t bad_crtc_id;
>   	drmModeCrtc *crtc;
>   	int ret;
>   
>   	/* Create a valid lease */
> -	igt_assert_eq(make_lease(data, &lease), 0);
> +	igt_assert_eq(make_lease(data), 0);
>   
> -	igt_display_require(&lease.display, lease.fd);
> +	igt_display_require(&data->lease.display, data->lease.fd);
>   
>   	/* Find another CRTC that we don't control */
>   	bad_crtc_id = 0;
> @@ -644,36 +647,35 @@ static void lease_unleased_crtc(data_t *data)
>   	igt_skip_on(bad_crtc_id == 0);
>   
>   	/* sanity check */
> -	ret = drmModeSetCrtc(lease.fd, data->crtc_id, 0, 0, 0, NULL, 0, NULL);
> +	ret = drmModeSetCrtc(data->lease.fd, data->crtc_id, 0, 0, 0, NULL, 0, NULL);
>   	igt_assert_eq(ret, 0);
> -	crtc = drmModeGetCrtc(lease.fd, data->crtc_id);
> +	crtc = drmModeGetCrtc(data->lease.fd, data->crtc_id);
>   	igt_assert(crtc);
>   	drmModeFreeCrtc(crtc);
>   
>   	/* Attempt to use the unleased crtc id. We need raw ioctl to bypass the
>   	 * igt_kms helpers.
>   	 */
> -	ret = drmModeSetCrtc(lease.fd, bad_crtc_id, 0, 0, 0, NULL, 0, NULL);
> +	ret = drmModeSetCrtc(data->lease.fd, bad_crtc_id, 0, 0, 0, NULL, 0, NULL);
>   	igt_assert_eq(ret, -ENOENT);
> -	crtc = drmModeGetCrtc(lease.fd, bad_crtc_id);
> +	crtc = drmModeGetCrtc(data->lease.fd, bad_crtc_id);
>   	igt_assert(!crtc);
>   	igt_assert_eq(errno, ENOENT);
>   	drmModeFreeCrtc(crtc);
>   
> -	terminate_lease(&lease);
> +	terminate_lease(&data->lease);
>   }
>   
>   static void lease_unleased_connector(data_t *data)
>   {
> -	lease_t lease;
>   	int o;
>   	uint32_t bad_connector_id;
>   	drmModeConnector *c;
>   
>   	/* Create a valid lease */
> -	igt_assert_eq(make_lease(data, &lease), 0);
> +	igt_assert_eq(make_lease(data), 0);
>   
> -	igt_display_require(&lease.display, lease.fd);
> +	igt_display_require(&data->lease.display, data->lease.fd);
>   
>   	/* Find another connector that we don't control */
>   	bad_connector_id = 0;
> @@ -686,72 +688,70 @@ static void lease_unleased_connector(data_t *data)
>   	igt_skip_on(bad_connector_id == 0);
>   
>   	/* sanity check */
> -	c = drmModeGetConnector(lease.fd, data->connector_id);
> +	c = drmModeGetConnector(data->lease.fd, data->connector_id);
>   	igt_assert(c);
>   
>   	/* Attempt to use the unleased connector id. Note that the
>   	 */
> -	c = drmModeGetConnector(lease.fd, bad_connector_id);
> +	c = drmModeGetConnector(data->lease.fd, bad_connector_id);
>   	igt_assert(!c);
>   	igt_assert_eq(errno, ENOENT);
>   
> -	terminate_lease(&lease);
> +	terminate_lease(&data->lease);
>   }
>   
>   /* Test revocation of lease */
>   static void lease_revoke(data_t *data)
>   {
> -	lease_t lease;
>   	struct drm_mode_revoke_lease mrl;
>   	int ret;
>   
>   	/* Create a valid lease */
> -	igt_assert_eq(make_lease(data, &lease), 0);
> +	igt_assert_eq(make_lease(data), 0);
>   
> -	igt_display_require(&lease.display, lease.fd);
> +	igt_display_require(&data->lease.display, data->lease.fd);
>   
>   	/* try to revoke an invalid lease */
>   	mrl.lessee_id = 0;
>   	igt_assert_eq(revoke_lease(data->master.fd, &mrl), -ENOENT);
>   
>   	/* try to revoke with the wrong fd */
> -	mrl.lessee_id = lease.lessee_id;
> -	igt_assert_eq(revoke_lease(lease.fd, &mrl), -EACCES);
> +	mrl.lessee_id = data->lease.lessee_id;
> +	igt_assert_eq(revoke_lease(data->lease.fd, &mrl), -EACCES);
>   
>   	/* Revoke the lease using the master fd */
> -	mrl.lessee_id = lease.lessee_id;
> +	mrl.lessee_id = data->lease.lessee_id;
>   	igt_assert_eq(revoke_lease(data->master.fd, &mrl), 0);
>   
>   	/* Try to use the leased objects */
> -	ret = prepare_crtc(&lease, data);
> +	ret = prepare_crtc(data, false);
>   
>   	/* Ensure that the expected error is returned */
>   	igt_assert_eq(ret, -ENOENT);
>   
> -	terminate_lease(&lease);
> +	terminate_lease(&data->lease);
>   
>   	/* make sure the lease is gone */
> -	mrl.lessee_id = lease.lessee_id;
> +	mrl.lessee_id = data->lease.lessee_id;
>   	igt_assert_eq(revoke_lease(data->master.fd, &mrl), -ENOENT);
>   }
>   
>   /* Test leasing objects more than once */
>   static void lease_again(data_t *data)
>   {
> -	lease_t lease_a, lease_b;
>   
>   	/* Create a valid lease */
> -	igt_assert_eq(make_lease(data, &lease_a), 0);
> +	igt_assert_eq(make_lease(data), 0);
>   
>   	/* Attempt to re-lease the same objects */
> -	igt_assert_eq(make_lease(data, &lease_b), -EBUSY);
> +	igt_assert_eq(make_lease(data), -EBUSY);
>   
> -	terminate_lease(&lease_a);
> +	terminate_lease(&data->lease);
>   
>   	/* Now attempt to lease the same objects */
> -	igt_assert_eq(make_lease(data, &lease_b), 0);
> +	igt_assert_eq(make_lease(data), 0);
>   
> -	terminate_lease(&lease_b);
> +	terminate_lease(&data->lease);
>   }
>   
>   #define assert_unleased(ret) \
> @@ -761,14 +761,13 @@ static void lease_again(data_t *data)
>   /* Test leasing an invalid connector */
>   static void lease_invalid_connector(data_t *data)
>   {
> -	lease_t lease;
>   	uint32_t save_connector_id;
>   	int ret;
>   
>   	/* Create an invalid lease */
>   	save_connector_id = data->connector_id;
>   	data->connector_id = 0xbaadf00d;
> -	ret = make_lease(data, &lease);
> +	ret = make_lease(data);
>   	data->connector_id = save_connector_id;
>   	assert_unleased(ret);
>   }
> @@ -776,28 +775,26 @@ static void lease_invalid_connector(data_t *data)
>   /* Test leasing an invalid crtc */
>   static void lease_invalid_crtc(data_t *data)
>   {
> -	lease_t lease;
>   	uint32_t save_crtc_id;
>   	int ret;
>   
>   	/* Create an invalid lease */
>   	save_crtc_id = data->crtc_id;
>   	data->crtc_id = 0xbaadf00d;
> -	ret = make_lease(data, &lease);
> +	ret = make_lease(data);
>   	data->crtc_id = save_crtc_id;
>   	assert_unleased(ret);
>   }
>   
>   static void lease_invalid_plane(data_t *data)
>   {
> -	lease_t lease;
>   	uint32_t save_plane_id;
>   	int ret;
>   
>   	/* Create an invalid lease */
>   	save_plane_id = data->plane_id;
>   	data->plane_id = 0xbaadf00d;
> -	ret = make_lease(data, &lease);
> +	ret = make_lease(data);
>   	data->plane_id = save_plane_id;
>   	assert_unleased(ret);
>   }
> @@ -1239,6 +1236,7 @@ igt_main
>   									DRM_PLANE_TYPE_PRIMARY)->drm_plane->plane_id;
>   						f->func(&data);
>   					}
> +					terminate_lease(&data.lease);
>   				}
>   			}
>   		}


More information about the igt-dev mailing list