[igt-dev] [PATCH i-g-t 3/4] tests/intel/kms_psr: Add FBC support to PSR/PSR2/PR tests
Jeevan B
jeevan.b at intel.com
Fri Dec 1 12:49:51 UTC 2023
For LunarLake (intel_display_ver 20), FBC can be enabled along with
PSR/PSR2/PR, thereby adding FBC checks to validate this scenario.
Signed-off-by: Jeevan B <jeevan.b at intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai at intel.com>
---
lib/igt_psr.h | 5 +
tests/intel/kms_psr.c | 318 ++++++++++++++++++++++++++++--------------
2 files changed, 219 insertions(+), 104 deletions(-)
diff --git a/lib/igt_psr.h b/lib/igt_psr.h
index a30330e6c..36711c0d4 100644
--- a/lib/igt_psr.h
+++ b/lib/igt_psr.h
@@ -40,6 +40,11 @@ enum psr_mode {
PSR_DISABLED,
};
+enum fbc_mode {
+ FBC_DISABLED,
+ FBC_ENABLED,
+};
+
bool psr_disabled_check(int debugfs_fd);
bool psr2_selective_fetch_check(int debugfs_fd);
bool psr_wait_entry(int debugfs_fd, enum psr_mode mode, igt_output_t *output);
diff --git a/tests/intel/kms_psr.c b/tests/intel/kms_psr.c
index aea8b0b3f..fa5333f9a 100644
--- a/tests/intel/kms_psr.c
+++ b/tests/intel/kms_psr.c
@@ -31,6 +31,7 @@
* Test category: functionality test
*/
+#include "i915/intel_fbc.h"
#include "igt.h"
#include "igt_sysfs.h"
#include "igt_psr.h"
@@ -47,24 +48,42 @@
* Description: Basic check for %arg[1] if it is detecting changes made in planes
* Functionality: %arg[1]
*
+ * SUBTEST: fbc-%s-basic
+ * Description: Basic check for fbc with %arg[1] if it is detecting changes made in planes
+ * Functionality: %arg[1], fbc
+ *
* SUBTEST: %s-dpms
* Description: Check if %arg[1] is detecting changes when rendering operation
* is performed with dpms enabled or disabled
* Functionality: %arg[1], dpms
*
+ * SUBTEST: fbc-%s-dpms
+ * Description: Check if fbc with %arg[1] is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: %arg[1], dpms, fbc
+ *
* SUBTEST: %s-no-drrs
* Description: Check if %arg[1] is detecting changes when drrs is disabled
* Functionality: %arg[1], drrs
*
+ * SUBTEST: fbc-%s-no-drrs
+ * Description: Check if fbc with %arg[1] is detecting changes when drrs is disabled
+ * Functionality: %arg[1], drrs, fbc
+ *
* SUBTEST: %s-suspend
* Description: Check if %arg[1] is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: %arg[1], suspend
*
+ * SUBTEST: fbc-%s-suspend
+ * Description: Check if fbc with %arg[1] is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: %arg[1], suspend, fbc
+ *
* arg[1]:
*
- * @psr: psr1
- * @psr2: psr2
+ * @psr: psr1
+ * @psr2: psr2
*/
/**
@@ -74,6 +93,12 @@
* Driver requirement: i915
* Functionality: %arg[1], plane
*
+ * SUBTEST: fbc-%s-%s-%s
+ * Description: Check if fbc with %arg[1] is detecting memory mapping %arg[3] operations
+ * performed on %arg[2] planes
+ * Driver requirement: i915
+ * Functionality: %arg[1], plane, fbc
+ *
* arg[1]:
*
* @psr: psr1
@@ -97,11 +122,21 @@
* performed on primary plane
* Functionality: %arg[1], plane
*
+ * SUBTEST: fbc-%s-primary-page-flip
+ * Description: Check if fbc with %arg[1] is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: %arg[1], plane, fbc
+ *
* SUBTEST: %s-primary-%s
* Description: Check if %arg[1] is detecting rendering operations %arg[2]
* when performed on primary plane
* Functionality: %arg[1], plane
*
+ * SUBTEST: fbc-%s-primary-%s
+ * Description: Check if %arg[1] is detecting rendering operations %arg[2]
+ * when performed on primary plane
+ * Functionality: %arg[1], plane, fbc
+ *
* arg[1]:
*
* @psr: psr1
@@ -119,6 +154,11 @@
* operations %arg[3] performed on %arg[2] planes
* Functionality: %arg[1], plane
*
+ * SUBTEST: fbc-%s-%s-%s
+ * Description: Check if fbc with %arg[1] is detecting rendering and plane
+ * operations %arg[3] performed on %arg[2] planes
+ * Functionality: %arg[1], plane, fbc
+ *
* arg[1]:
*
* @psr: psr1
@@ -143,22 +183,44 @@
* Functionality: pr
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-basic
+ * Description: Basic check for fbc with pr if it is detecting changes made in planes
+ * Functionality: pr, fbc
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr-dpms
* Description: Check if pr is detecting changes when rendering operation
* is performed with dpms enabled or disabled
* Functionality: pr, dpms
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-dpms
+ * Description: Check if fbc with pr is detecting changes when rendering operation
+ * is performed with dpms enabled or disabled
+ * Functionality: pr, dpms, fbc
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr-no-drrs
* Description: Check if pr is detecting changes when drrs is disabled
* Functionality: pr, drrs
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-no-drrs
+ * Description: Check if fbc with pr is detecting changes when drrs is disabled
+ * Functionality: pr, drrs, fbc
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr-suspend
* Description: Check if pr is detecting changes when plane operation is
* performed with suspend resume cycles
* Functionality: pr, suspend
* Mega feature: DP2.0
+ *
+ * SUBTEST: fbc-pr-suspend
+ * Description: Check if fbc with pr is detecting changes when plane operation is
+ * performed with suspend resume cycles
+ * Functionality: pr, suspend, fbc
+ * Mega feature: DP2.0
*/
/**
@@ -169,6 +231,13 @@
* Functionality: pr, plane
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-%s-%s
+ * Description: Check if fbc with pr is detecting memory mapping %arg[2] operations
+ * performed on %arg[1] planes
+ * Driver requirement: i915
+ * Functionality: pr, plane, fbc
+ * Mega feature: DP2.0
+ *
* arg[1]:
*
* @cursor: Cursor plane
@@ -188,12 +257,24 @@
* Functionality: pr, plane
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-primary-page-flip
+ * Description: Check if fbc with pr is detecting page-flipping operation
+ * performed on primary plane
+ * Functionality: pr, plane, fbc
+ * Mega feature: DP2.0
+ *
* SUBTEST: pr-primary-%s
* Description: Check if pr is detecting rendering operations %arg[1]
* when performed on primary plane
* Functionality: pr, plane
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-primary-%s
+ * Description: Check if fbc with pr is detecting rendering operations %arg[1]
+ * when performed on primary plane
+ * Functionality: pr, plane, fbc
+ * Mega feature: DP2.0
+ *
* arg[1]:
*
* @blt: Blitter
@@ -207,6 +288,12 @@
* Functionality: pr, plane
* Mega feature: DP2.0
*
+ * SUBTEST: fbc-pr-%s-%s
+ * Description: Check if fbc with pr is detecting rendering and plane
+ * operations %arg[2] performed on %arg[1] planes
+ * Functionality: pr, plane, fbc
+ * Mega feature: DP2.0
+ *
* arg[1]:
*
* @cursor: Cursor plane
@@ -251,6 +338,7 @@ typedef struct {
enum operations op;
int test_plane_id;
enum psr_mode op_psr_mode;
+ enum fbc_mode op_fbc_mode;
uint32_t devid;
uint32_t crtc_id;
igt_display_t display;
@@ -261,6 +349,7 @@ typedef struct {
int mod_stride;
drmModeModeInfo *mode;
igt_output_t *output;
+ bool fbc_flag;
} data_t;
static void create_cursor_fb(data_t *data)
@@ -659,6 +748,10 @@ static void test_setup(data_t *data)
psr_enable_if_enabled(data);
setup_test_plane(data, data->test_plane_id);
if (psr_wait_entry_if_enabled(data)) {
+ if (data->fbc_flag == true && data->op_fbc_mode == FBC_ENABLED)
+ igt_assert_f(intel_fbc_wait_until_enabled(data->drm_fd,
+ pipe),
+ "FBC still disabled");
psr_entered = true;
break;
}
@@ -679,14 +772,20 @@ data_t data = {};
igt_main
{
- int z;
+ int z, y;
enum operations op;
+ enum pipe pipe;
const char *append_subtest_name[3] = {
"psr-",
"psr2-",
"pr-"
};
+ const char *append_fbc_subtest[2] = {
+ "",
+ "fbc-"
+ };
int modes[] = {PSR_MODE_1, PSR_MODE_2, PR_MODE};
+ int fbc_status[] = {FBC_DISABLED, FBC_ENABLED};
igt_output_t *output;
igt_fixture {
@@ -697,52 +796,38 @@ igt_main
data.bops = buf_ops_create(data.drm_fd);
igt_display_require(&data.display, data.drm_fd);
igt_require_f(output_supports_psr(&data), "Sink does not support PSR/PSR2/PR\n");
+ if ((intel_display_ver(intel_get_drm_devid(data.drm_fd) == 20)) &&
+ (intel_fbc_supported_on_chipset(data.drm_fd, pipe))) {
+ data.fbc_flag = true;
+ }
}
- for (z = 0; z < ARRAY_SIZE(modes); z++) {
- data.op_psr_mode = modes[z];
-
- igt_describe("Basic check for psr if it is detecting changes made in planes");
- igt_subtest_with_dynamic_f("%sbasic", append_subtest_name[z]) {
- for_each_connected_output(&data.display, output) {
- if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
- data.op_psr_mode, output))
- continue;
- igt_display_reset(&data.display);
- data.output = output;
- igt_dynamic_f("%s", data.output->name) {
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- test_setup(&data);
- test_cleanup(&data);
- }
- }
- }
+ for (y = 0; y < ARRAY_SIZE(fbc_status); y++) {
+ data.op_fbc_mode = fbc_status[y];
+ for (z = 0; z < ARRAY_SIZE(modes); z++) {
+ data.op_psr_mode = modes[z];
- igt_describe("Check if psr is detecting changes when drrs is disabled");
- igt_subtest_with_dynamic_f("%sno-drrs", append_subtest_name[z]) {
- for_each_connected_output(&data.display, output) {
- if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
- data.op_psr_mode, output))
- continue;
- igt_display_reset(&data.display);
- data.output = output;
- igt_dynamic_f("%s", data.output->name) {
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- test_setup(&data);
- igt_assert(drrs_disabled(&data));
- test_cleanup(&data);
+ igt_describe("Basic check for psr if it is detecting changes made "
+ "in planes");
+ igt_subtest_with_dynamic_f("%s%sbasic", append_fbc_subtest[y],
+ append_subtest_name[z]) {
+ for_each_connected_output(&data.display, output) {
+ if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
+ data.op_psr_mode, output))
+ continue;
+ igt_display_reset(&data.display);
+ data.output = output;
+ igt_dynamic_f("%s", data.output->name) {
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ test_setup(&data);
+ test_cleanup(&data);
+ }
}
}
- }
- for (op = PAGE_FLIP; op <= RENDER; op++) {
- igt_describe("Check if psr is detecting page-flipping,memory mapping and "
- "rendering operations performed on primary planes");
- igt_subtest_with_dynamic_f("%sprimary-%s",
- append_subtest_name[z],
- op_str(op)) {
- igt_skip_on(is_xe_device(data.drm_fd) &&
- (op == MMAP_CPU || op == MMAP_GTT));
+ igt_describe("Check if psr is detecting changes when drrs is disabled");
+ igt_subtest_with_dynamic_f("%s%sno-drrs", append_fbc_subtest[y],
+ append_subtest_name[z]) {
for_each_connected_output(&data.display, output) {
if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
data.op_psr_mode, output))
@@ -750,24 +835,88 @@ igt_main
igt_display_reset(&data.display);
data.output = output;
igt_dynamic_f("%s", data.output->name) {
- data.op = op;
data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
test_setup(&data);
- run_test(&data);
+ igt_assert(drrs_disabled(&data));
test_cleanup(&data);
}
}
}
+
+ for (op = PAGE_FLIP; op <= RENDER; op++) {
+ igt_describe("Check if psr is detecting page-flipping,memory "
+ "mapping and rendering operations performed on "
+ "primary planes");
+ igt_subtest_with_dynamic_f("%s%sprimary-%s", append_fbc_subtest[y],
+ append_subtest_name[z], op_str(op)) {
+ igt_skip_on(is_xe_device(data.drm_fd) &&
+ (op == MMAP_CPU || op == MMAP_GTT));
+ for_each_connected_output(&data.display, output) {
+ if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
+ data.op_psr_mode, output))
+ continue;
+ igt_display_reset(&data.display);
+ data.output = output;
+ igt_dynamic_f("%s", data.output->name) {
+ data.op = op;
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
+ test_setup(&data);
+ run_test(&data);
+ test_cleanup(&data);
+ }
+ }
+ }
+ }
+
+ for (op = MMAP_GTT; op <= PLANE_ONOFF; op++) {
+ igt_describe("Check if psr is detecting memory mapping,rendering "
+ "and plane operations performed on sprite planes");
+ igt_subtest_with_dynamic_f("%s%ssprite-%s", append_fbc_subtest[y],
+ append_subtest_name[z], op_str(op)) {
+ igt_skip_on(is_xe_device(data.drm_fd) &&
+ (op == MMAP_CPU || op == MMAP_GTT));
+ for_each_connected_output(&data.display, output) {
+ if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
+ data.op_psr_mode, output))
+ continue;
+ igt_display_reset(&data.display);
+ data.output = output;
+ igt_dynamic_f("%s", data.output->name) {
+ data.op = op;
+ data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ test_setup(&data);
+ run_test(&data);
+ test_cleanup(&data);
+ }
+ }
+ }
+
+ igt_describe("Check if psr is detecting memory mapping, rendering "
+ "and plane operations performed on cursor planes");
+ igt_subtest_with_dynamic_f("%s%scursor-%s", append_fbc_subtest[y],
+ append_subtest_name[z], op_str(op)) {
+ igt_skip_on(is_xe_device(data.drm_fd) &&
+ (op == MMAP_CPU || op == MMAP_GTT));
+ for_each_connected_output(&data.display, output) {
+ if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
+ data.op_psr_mode, output))
+ continue;
+ igt_display_reset(&data.display);
+ data.output = output;
+ igt_dynamic_f("%s", data.output->name) {
+ data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
+ test_setup(&data);
+ run_test(&data);
+ test_cleanup(&data);
+ }
+ }
+ }
}
- for (op = MMAP_GTT; op <= PLANE_ONOFF; op++) {
- igt_describe("Check if psr is detecting memory mapping,rendering "
- "and plane operations performed on sprite planes");
- igt_subtest_with_dynamic_f("%ssprite-%s",
- append_subtest_name[z],
- op_str(op)) {
- igt_skip_on(is_xe_device(data.drm_fd) &&
- (op == MMAP_CPU || op == MMAP_GTT));
+ igt_describe("Check if psr is detecting changes when rendering operation "
+ "is performed with dpms enabled or disabled");
+ igt_subtest_with_dynamic_f("%s%sdpms", append_fbc_subtest[y],
+ append_subtest_name[z]) {
for_each_connected_output(&data.display, output) {
if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
data.op_psr_mode, output))
@@ -775,22 +924,21 @@ igt_main
igt_display_reset(&data.display);
data.output = output;
igt_dynamic_f("%s", data.output->name) {
- data.op = op;
- data.test_plane_id = DRM_PLANE_TYPE_OVERLAY;
+ data.op = igt_get_render_copyfunc(data.devid) ?
+ RENDER : BLT;
+ data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
test_setup(&data);
+ dpms_off_on(&data);
run_test(&data);
test_cleanup(&data);
}
}
}
- igt_describe("Check if psr is detecting memory mapping, rendering "
- "and plane operations performed on cursor planes");
- igt_subtest_with_dynamic_f("%scursor-%s",
- append_subtest_name[z],
- op_str(op)) {
- igt_skip_on(is_xe_device(data.drm_fd) &&
- (op == MMAP_CPU || op == MMAP_GTT));
+ igt_describe("Check if psr is detecting changes when plane operation is "
+ "performed with suspend resume cycles");
+ igt_subtest_with_dynamic_f("%s%ssuspend", append_fbc_subtest[y],
+ append_subtest_name[z]) {
for_each_connected_output(&data.display, output) {
if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
data.op_psr_mode, output))
@@ -798,56 +946,18 @@ igt_main
igt_display_reset(&data.display);
data.output = output;
igt_dynamic_f("%s", data.output->name) {
+ data.op = PLANE_ONOFF;
data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
test_setup(&data);
+ igt_system_suspend_autoresume(SUSPEND_STATE_MEM,
+ SUSPEND_TEST_NONE);
+ igt_assert(psr_wait_entry_if_enabled(&data));
run_test(&data);
test_cleanup(&data);
}
}
}
}
-
- igt_describe("Check if psr is detecting changes when rendering operation is performed"
- " with dpms enabled or disabled");
- igt_subtest_with_dynamic_f("%sdpms", append_subtest_name[z]) {
- for_each_connected_output(&data.display, output) {
- if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
- data.op_psr_mode, output))
- continue;
- igt_display_reset(&data.display);
- data.output = output;
- igt_dynamic_f("%s", data.output->name) {
- data.op = igt_get_render_copyfunc(data.devid) ? RENDER : BLT;
- data.test_plane_id = DRM_PLANE_TYPE_PRIMARY;
- test_setup(&data);
- dpms_off_on(&data);
- run_test(&data);
- test_cleanup(&data);
- }
- }
- }
-
- igt_describe("Check if psr is detecting changes when plane operation is performed "
- "with suspend resume cycles");
- igt_subtest_with_dynamic_f("%ssuspend", append_subtest_name[z]) {
- for_each_connected_output(&data.display, output) {
- if (!psr_sink_support(data.drm_fd, data.debugfs_fd,
- data.op_psr_mode, output))
- continue;
- igt_display_reset(&data.display);
- data.output = output;
- igt_dynamic_f("%s", data.output->name) {
- data.op = PLANE_ONOFF;
- data.test_plane_id = DRM_PLANE_TYPE_CURSOR;
- test_setup(&data);
- igt_system_suspend_autoresume(SUSPEND_STATE_MEM,
- SUSPEND_TEST_NONE);
- igt_assert(psr_wait_entry_if_enabled(&data));
- run_test(&data);
- test_cleanup(&data);
- }
- }
- }
}
igt_fixture {
--
2.25.1
More information about the igt-dev
mailing list