[igt-dev] [i-g-t V5 8/9] tests/kms_vrr: Add new subtest for DRRS without modeset
Srinivas, Vidya
vidya.srinivas at intel.com
Mon Dec 4 13:08:53 UTC 2023
Tested-by: Vidya Srinivas <vidya.srinivas at intel.com>
> -----Original Message-----
> From: Modem, Bhanuprakash <bhanuprakash.modem at intel.com>
> Sent: Monday, December 4, 2023 1:11 PM
> To: igt-dev at lists.freedesktop.org; Srinivas, Vidya <vidya.srinivas at intel.com>
> Cc: Modem, Bhanuprakash <bhanuprakash.modem at intel.com>
> Subject: [i-g-t V5 8/9] tests/kms_vrr: Add new subtest for DRRS without
> modeset
>
> This test is same as 'seamless-rr-switch-vrr' but performs on DRRS panel
> without VRR.
>
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
> ---
> tests/kms_vrr.c | 69 +++++++++++++++++++++++++++++++++++--------------
> 1 file changed, 49 insertions(+), 20 deletions(-)
>
> diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c index 74f1b0d09..b8e5c4608
> 100644
> --- a/tests/kms_vrr.c
> +++ b/tests/kms_vrr.c
> @@ -31,6 +31,7 @@
> */
>
> #include "igt.h"
> +#include "i915/intel_drrs.h"
> #include "sw_sync.h"
> #include <fcntl.h>
> #include <signal.h>
> @@ -57,6 +58,10 @@
> * Description: Test to switch RR seamlessly without modeset.
> * Functionality: adaptive_sync, lrr
> *
> + * SUBTEST: seamless-rr-switch-drrs
> + * Description: Test to switch RR seamlessly without modeset.
> + * Functionality: adaptive_sync, drrs
> + *
> * SUBTEST: negative-basic
> * Description: Make sure that VRR should not be enabled on the Non-VRR
> panel.
> */
> @@ -75,7 +80,8 @@ enum {
> TEST_SUSPEND = 1 << 2,
> TEST_FLIPLINE = 1 << 3,
> TEST_SEAMLESS_VRR = 1 << 4,
> - TEST_NEGATIVE = 1 << 5,
> + TEST_SEAMLESS_DRRS = 1 << 5,
> + TEST_NEGATIVE = 1 << 6,
> };
>
> enum {
> @@ -492,24 +498,27 @@ test_seamless_rr_basic(data_t *data, enum pipe
> pipe, igt_output_t *output, uint3
> uint32_t result;
> vtest_ns_t vtest_ns;
> uint64_t rate;
> + bool vrr = !!(flags & TEST_SEAMLESS_VRR);
>
> - igt_info("Use HIGH_RR Mode as default: ");
> + igt_info("Use HIGH_RR Mode as default (VRR: %s): ", vrr ? "ON" :
> +"OFF");
> kmstest_dump_mode(&data->switch_modes[HIGH_RR_MODE]);
>
> prepare_test(data, output, pipe);
> vtest_ns = get_test_rate_ns(data->range);
>
> - igt_pipe_set_prop_value(&data->display, pipe,
> IGT_CRTC_VRR_ENABLED, true);
> - igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) ==
> 0);
> + if (vrr) {
> + igt_pipe_set_prop_value(&data->display, pipe,
> IGT_CRTC_VRR_ENABLED, true);
> + igt_assert(igt_display_try_commit_atomic(&data->display, 0,
> NULL) == 0);
> + }
>
> rate = vtest_ns.max;
> result = flip_and_measure(data, output, pipe, rate,
> TEST_DURATION_NS);
> igt_assert_f(result > 75,
> - "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on
> threshold not reached, result was %u%%\n",
> - data->range.max, rate, result);
> + "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s
> threshold not reached, result was %u%%\n",
> + data->range.max, rate, vrr ? "on" : "off", result);
>
> /* Switch to low rr mode without modeset. */
> - igt_info("Switch to LOW_RR Mode: ");
> + igt_info("Switch to LOW_RR Mode (VRR: %s): ", vrr ? "ON" : "OFF");
> kmstest_dump_mode(&data->switch_modes[LOW_RR_MODE]);
> igt_output_override_mode(output, &data-
> >switch_modes[LOW_RR_MODE]);
> igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) ==
> 0); @@ -517,25 +526,28 @@ test_seamless_rr_basic(data_t *data, enum
> pipe pipe, igt_output_t *output, uint3
> rate = vtest_ns.min;
> result = flip_and_measure(data, output, pipe, rate,
> TEST_DURATION_NS);
> igt_assert_f(result > 75,
> - "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on
> threshold not reached, result was %u%%\n",
> - data->range.min, rate, result);
> + "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s
> threshold not reached, result was %u%%\n",
> + data->range.min, rate, vrr ? "on" : "off", result);
>
> /* Switch back to high rr mode without modeset. */
> - igt_info("Switch back to HIGH_RR Mode: ");
> + igt_info("Switch back to HIGH_RR Mode (VRR: %s): ", vrr ? "ON" :
> +"OFF");
> kmstest_dump_mode(&data->switch_modes[HIGH_RR_MODE]);
> igt_output_override_mode(output, &data-
> >switch_modes[HIGH_RR_MODE]);
> igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) ==
> 0);
>
> rate = vtest_ns.mid;
> result = flip_and_measure(data, output, pipe, rate,
> TEST_DURATION_NS);
> - igt_assert_f(result > 75,
> - "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on
> threshold not reached, result was %u%%\n",
> - ((data->range.max + data->range.min) / 2), rate, result);
> + igt_assert_f(vrr ? (result > 75) : (result < 10),
> + "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s
> threshold %s, result was %u%%\n",
> + ((data->range.max + data->range.min) / 2), rate,
> + vrr ? "on" : "off", vrr ? "not reached" : "exceeded", result);
> }
>
> static void test_cleanup(data_t *data, enum pipe pipe, igt_output_t *output)
> {
> - igt_pipe_set_prop_value(&data->display, pipe,
> IGT_CRTC_VRR_ENABLED, false);
> + if (vrr_capable(output))
> + igt_pipe_set_prop_value(&data->display, pipe,
> IGT_CRTC_VRR_ENABLED,
> +false);
> +
> igt_plane_set_fb(data->primary, NULL);
> igt_output_set_pipe(output, PIPE_NONE);
> igt_output_override_mode(output, NULL); @@ -547,10 +559,16 @@
> static void test_cleanup(data_t *data, enum pipe pipe, igt_output_t *output)
>
> static bool output_constraint(data_t *data, igt_output_t *output, uint32_t
> flags) {
> - if ((flags & TEST_SEAMLESS_VRR) &&
> + if ((flags & (TEST_SEAMLESS_VRR | TEST_SEAMLESS_DRRS)) &&
> output->config.connector->connector_type !=
> DRM_MODE_CONNECTOR_eDP)
> return false;
>
> + if ((flags & TEST_SEAMLESS_DRRS) &&
> + !intel_output_has_drrs(data->drm_fd, output)) {
> + igt_info("Selected panel won't support DRRS.\n");
> + return false;
> + }
> +
> /* Reset output */
> igt_display_reset(&data->display);
>
> @@ -570,7 +588,7 @@ static bool output_constraint(data_t *data,
> igt_output_t *output, uint32_t flags
> igt_output_override_mode(output, &data-
> >switch_modes[HIGH_RR_MODE]);
>
> /* Search for a low refresh rate mode. */
> - if (!(flags & TEST_SEAMLESS_VRR))
> + if (!(flags & (TEST_SEAMLESS_VRR | TEST_SEAMLESS_DRRS)))
> return true;
>
> data->switch_modes[LOW_RR_MODE] =
> low_rr_mode_with_same_res(output, data->range.min); @@ -587,6 +605,9
> @@ static bool config_constraint(data_t *data, igt_output_t *output, uint32_t
> flags
> if (!has_vrr(output))
> return false;
>
> + if (flags & TEST_SEAMLESS_DRRS)
> + goto out;
> +
> /* For Negative tests, panel should be non-vrr. */
> if ((flags & TEST_NEGATIVE) && vrr_capable(output))
> return false;
> @@ -594,6 +615,7 @@ static bool config_constraint(data_t *data,
> igt_output_t *output, uint32_t flags
> if ((flags & ~TEST_NEGATIVE) && !vrr_capable(output))
> return false;
>
> +out:
> if (!output_constraint(data, output, flags))
> return false;
>
> @@ -670,10 +692,17 @@ igt_main
> igt_subtest_with_dynamic("negative-basic")
> run_vrr_test(&data, test_basic, TEST_NEGATIVE);
>
> - igt_describe("Test to switch RR seamlessly without modeset.");
> - igt_subtest_with_dynamic("seamless-rr-switch-vrr"){
> - igt_require_intel(data.drm_fd);
> - run_vrr_test(&data, test_seamless_rr_basic,
> TEST_SEAMLESS_VRR);
> + igt_subtest_group {
> + igt_fixture
> + igt_require_intel(data.drm_fd);
> +
> + igt_describe("Test to switch RR seamlessly without
> modeset.");
> + igt_subtest_with_dynamic("seamless-rr-switch-vrr")
> + run_vrr_test(&data, test_seamless_rr_basic,
> TEST_SEAMLESS_VRR);
> +
> + igt_describe("Test to switch RR seamlessly without
> modeset.");
> + igt_subtest_with_dynamic("seamless-rr-switch-drrs")
> + run_vrr_test(&data, test_seamless_rr_basic,
> TEST_SEAMLESS_DRRS);
> }
>
> igt_fixture {
> --
> 2.40.0
More information about the igt-dev
mailing list