[PATCH i-g-t 1/2] tests/kms_async_flip: Speed up the CRC test on Intel hw

Ville Syrjälä ville.syrjala at linux.intel.com
Fri Dec 8 18:29:26 UTC 2023


On Fri, Dec 08, 2023 at 10:31:35AM +0530, Modem, Bhanuprakash wrote:
> 
> On 07-12-2023 10:41 pm, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > 
> > Go back to using igt_draw mmap stuff to do the mid-test
> > rendering in the CRC subtest to make it faster. Going
> > via all the cairo machinery is very very slow, but we'll
> > leave that codepath in place for non-Intel hw. This makes
> > the test pass on a DG2 here as we can now produce enough
> > frames to have some confidence in the results.
> > 
> > Note that some extra care is apparently needed with the order
> > in which things are done. If we pin the buffers to the display
> > first the mmap is likely to fail (due to the FB getting pinned
> > outside the reach of the small BAR presumably). Curiosuly the
> > mmap itself succeeds but we get a SIGBUS when trying to acccess
> > the buffer contents. If we touch the FBs first via mmap and only
> > then pin them to the display everything works correctly.
> > 
> > Cc: Melissa Wen <mwen at igalia.com>
> > Cc: Alex Hung <alex.hung at amd.com>
> > Cc: André Almeida <andrealmeid at igalia.com>
> > Fixes: 8ba806e7e196 ("tests/kms_async_flips: Support more vendors")
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> >   tests/kms_async_flips.c | 66 +++++++++++++++++++++++++++++------------
> >   1 file changed, 47 insertions(+), 19 deletions(-)
> > 
> > diff --git a/tests/kms_async_flips.c b/tests/kms_async_flips.c
> > index 6fddad093913..f7f9add89548 100644
> > --- a/tests/kms_async_flips.c
> > +++ b/tests/kms_async_flips.c
> > @@ -100,6 +100,7 @@ typedef struct {
> >   	enum pipe pipe;
> >   	bool alternate_sync_async;
> >   	bool allow_fail;
> > +	struct buf_ops *bops;
> >   } data_t;
> >   
> >   static void flip_handler(int fd_, unsigned int sequence, unsigned int tv_sec,
> > @@ -230,8 +231,6 @@ static void test_init_fbs(data_t *data)
> >   
> >   	igt_plane_set_fb(data->plane, &data->bufs[0]);
> >   	igt_plane_set_size(data->plane, width, height);
> > -
> > -	igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> >   }
> >   
> >   static void test_async_flip(data_t *data)
> > @@ -240,6 +239,8 @@ static void test_async_flip(data_t *data)
> >   	long long int fps;
> >   	struct timeval start, end, diff;
> >   
> > +	igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> > +
> >   	gettimeofday(&start, NULL);
> >   	frame = 1;
> >   	do {
> > @@ -336,6 +337,8 @@ static void test_timestamp(data_t *data)
> >   	unsigned int seq, seq1;
> >   	int ret;
> >   
> > +	igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> > +
> >   	/*
> >   	 * In older platforms(<= gen10), async address update bit is double buffered.
> >   	 * So flip timestamp can be verified only from the second flip.
> > @@ -381,6 +384,8 @@ static void test_cursor(data_t *data)
> >   	struct igt_fb cursor_fb;
> >   	struct drm_mode_cursor cur;
> >   
> > +	igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> > +
> >   	/*
> >   	 * Intel's PSR2 selective fetch adds other planes to state when
> >   	 * necessary, causing the async flip to fail because async flip is not
> > @@ -429,6 +434,8 @@ static void test_invalid(data_t *data)
> >   	struct igt_fb fb;
> >   	drmModeModeInfo *mode;
> >   
> > +	igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
> > +
> >   	mode = igt_output_get_mode(data->output);
> >   	width = mode->hdisplay;
> >   	height = mode->vdisplay;
> > @@ -525,28 +532,48 @@ static unsigned int clock_ms(void)
> >   	return ts.tv_sec * 1000 + ts.tv_nsec / 1000000;
> >   }
> >   
> > +static void paint_fb(data_t *data, struct igt_fb *fb,
> > +		     int width, int height,
> > +		     uint32_t color)
> > +{
> > +	if (is_intel_device(data->drm_fd)) {
> > +		igt_draw_rect_fb(data->drm_fd, data->bops, 0, fb,
> > +				 gem_has_mappable_ggtt(data->drm_fd) ?
> ---------------------------------^
> This is i915 specific, and expected to fail on XE.

Sigh. I did ask for a unified library API for i915 and xe but I guess
that still didn't happen :(

> 
> Instead, we could use igt_draw_supports_method() here.
> 
> - Bhanu
> 
> > +				 IGT_DRAW_MMAP_GTT : IGT_DRAW_MMAP_WC,
> > +				 0, 0, width, height, color);
> > +	} else {
> > +		cairo_t *cr;
> > +
> > +		cr = igt_get_cairo_ctx(data->drm_fd, fb);
> > +		igt_paint_color(cr, 0, 0, width, height,
> > +				((color & 0xff0000) >> 16) / 255.0,
> > +				((color & 0xff00) >> 8) / 255.0,
> > +				((color & 0xff) >> 9) / 255.0);
> > +		igt_put_cairo_ctx(cr);
> > +	}
> > +}
> > +
> >   static void test_crc(data_t *data)
> >   {
> >   	unsigned int frame = 0;
> >   	unsigned int start;
> > -	cairo_t *cr;
> > -	int ret;
> > +	int ret, width, height;
> > +	drmModeModeInfoPtr mode;
> > +
> > +	/* make things faster by using a smallish mode */
> > +	mode = &data->output->config.connector->modes[0];
> > +	width = mode->hdisplay;
> > +	height = mode->vdisplay;
> >   
> >   	data->flip_count = 0;
> >   	data->frame_count = 0;
> >   	data->flip_pending = false;
> >   
> > -	cr = igt_get_cairo_ctx(data->drm_fd, &data->bufs[frame]);
> > -	igt_paint_color(cr, 0, 0, data->bufs[frame].width, data->bufs[frame].height, 1.0, 0.0, 0.0);
> > -	igt_put_cairo_ctx(cr);
> > -
> > -	cr = igt_get_cairo_ctx(data->drm_fd, &data->bufs[!frame]);
> > -	igt_paint_color(cr, 0, 0, data->bufs[!frame].width, data->bufs[!frame].height, 1.0, 0.0, 0.0);
> > -	igt_put_cairo_ctx(cr);
> > +	paint_fb(data, &data->bufs[frame], width, height, 0xff0000ff);
> > +	paint_fb(data, &data->bufs[!frame], width, height, 0xff0000ff);
> >   
> >   	ret = drmModeSetCrtc(data->drm_fd, data->crtc_id, data->bufs[frame].fb_id, 0, 0,
> > -			     &data->output->config.connector->connector_id, 1,
> > -			     &data->output->config.connector->modes[0]);
> > +			     &data->output->config.connector->connector_id, 1, mode);
> >   	igt_assert_eq(ret, 0);
> >   
> >   	data->pipe_crc = igt_pipe_crc_new(data->drm_fd,
> > @@ -562,9 +589,7 @@ static void test_crc(data_t *data)
> >   
> >   	while (clock_ms() - start < 2000) {
> >   		/* fill the next fb with the expected color */
> > -		cr = igt_get_cairo_ctx(data->drm_fd, &data->bufs[frame]);
> > -		igt_paint_color(cr, 0, 0, 1, data->bufs[frame].height, 1.0, 0.0, 0.0);
> > -		igt_put_cairo_ctx(cr);
> > +		paint_fb(data, &data->bufs[frame], 1, height, 0xff0000ff);
> >   
> >   		data->flip_pending = true;
> >   		ret = drmModePageFlip(data->drm_fd, data->crtc_id, data->bufs[frame].fb_id,
> > @@ -575,9 +600,7 @@ static void test_crc(data_t *data)
> >   
> >   		/* clobber the previous fb which should no longer be scanned out */
> >   		frame = !frame;
> > -		cr = igt_get_cairo_ctx(data->drm_fd, &data->bufs[frame]);
> > -		igt_paint_color_rand(cr, 0, 0, 1, data->bufs[frame].height);
> > -		igt_put_cairo_ctx(cr);
> > +		paint_fb(data, &data->bufs[frame], 1, height, rand());
> >   	}
> >   
> >   	igt_pipe_crc_stop(data->pipe_crc);
> > @@ -644,6 +667,9 @@ igt_main
> >   
> >   		igt_require_f(igt_has_drm_cap(data.drm_fd, DRM_CAP_ASYNC_PAGE_FLIP),
> >   			      "Async Flip is not supported\n");
> > +
> > +		if (is_intel_device(data.drm_fd))
> > +			data.bops = buf_ops_create(data.drm_fd);
> >   	}
> >   
> >   	igt_describe("Verify the async flip functionality and the fps during async flips");
> > @@ -704,6 +730,8 @@ igt_main
> >   		for (i = 0; i < NUM_FBS; i++)
> >   			igt_remove_fb(data.drm_fd, &data.bufs[i]);
> >   
> > +		if (is_intel_device(data.drm_fd))
> > +			buf_ops_destroy(data.bops);
> >   		igt_display_reset(&data.display);
> >   		igt_display_commit(&data.display);
> >   		igt_display_fini(&data.display);

-- 
Ville Syrjälä
Intel


More information about the igt-dev mailing list