[i-g-t V7 6/8] tests/kms_vrr: Add new subtest for DRRS without modeset
Bhanuprakash Modem
bhanuprakash.modem at intel.com
Mon Dec 11 11:36:48 UTC 2023
This test is same as 'kms_vrr at seamless-rr-switch-vrr' but
performs on DRRS panel without enabling the VRR.
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
Tested-by: Vidya Srinivas <vidya.srinivas at intel.com>
---
tests/kms_vrr.c | 69 +++++++++++++++++++++++++++++++++++--------------
1 file changed, 49 insertions(+), 20 deletions(-)
diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
index 6cb5a9b10..de2ee13c7 100644
--- a/tests/kms_vrr.c
+++ b/tests/kms_vrr.c
@@ -31,6 +31,7 @@
*/
#include "igt.h"
+#include "i915/intel_drrs.h"
#include "sw_sync.h"
#include <fcntl.h>
#include <signal.h>
@@ -57,6 +58,10 @@
* Description: Test to switch RR seamlessly without modeset.
* Functionality: adaptive_sync, lrr
*
+ * SUBTEST: seamless-rr-switch-drrs
+ * Description: Test to switch RR seamlessly without modeset.
+ * Functionality: adaptive_sync, drrs
+ *
* SUBTEST: negative-basic
* Description: Make sure that VRR should not be enabled on the Non-VRR panel.
*/
@@ -75,7 +80,8 @@ enum {
TEST_SUSPEND = 1 << 2,
TEST_FLIPLINE = 1 << 3,
TEST_SEAMLESS_VRR = 1 << 4,
- TEST_NEGATIVE = 1 << 5,
+ TEST_SEAMLESS_DRRS = 1 << 5,
+ TEST_NEGATIVE = 1 << 6,
};
enum {
@@ -492,24 +498,27 @@ test_seamless_rr_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint3
uint32_t result;
vtest_ns_t vtest_ns;
uint64_t rate;
+ bool vrr = !!(flags & TEST_SEAMLESS_VRR);
- igt_info("Use HIGH_RR Mode as default: ");
+ igt_info("Use HIGH_RR Mode as default (VRR: %s): ", vrr ? "ON" : "OFF");
kmstest_dump_mode(&data->switch_modes[HIGH_RR_MODE]);
prepare_test(data, output, pipe);
vtest_ns = get_test_rate_ns(data->range);
- igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, true);
- igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
+ if (vrr) {
+ igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, true);
+ igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
+ }
rate = vtest_ns.max;
result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
igt_assert_f(result > 75,
- "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on threshold not reached, result was %u%%\n",
- data->range.max, rate, result);
+ "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s threshold not reached, result was %u%%\n",
+ data->range.max, rate, vrr ? "on" : "off", result);
/* Switch to low rr mode without modeset. */
- igt_info("Switch to LOW_RR Mode: ");
+ igt_info("Switch to LOW_RR Mode (VRR: %s): ", vrr ? "ON" : "OFF");
kmstest_dump_mode(&data->switch_modes[LOW_RR_MODE]);
igt_output_override_mode(output, &data->switch_modes[LOW_RR_MODE]);
igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
@@ -517,25 +526,28 @@ test_seamless_rr_basic(data_t *data, enum pipe pipe, igt_output_t *output, uint3
rate = vtest_ns.min;
result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
igt_assert_f(result > 75,
- "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on threshold not reached, result was %u%%\n",
- data->range.min, rate, result);
+ "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s threshold not reached, result was %u%%\n",
+ data->range.min, rate, vrr ? "on" : "off", result);
/* Switch back to high rr mode without modeset. */
- igt_info("Switch back to HIGH_RR Mode: ");
+ igt_info("Switch back to HIGH_RR Mode (VRR: %s): ", vrr ? "ON" : "OFF");
kmstest_dump_mode(&data->switch_modes[HIGH_RR_MODE]);
igt_output_override_mode(output, &data->switch_modes[HIGH_RR_MODE]);
igt_assert(igt_display_try_commit_atomic(&data->display, 0, NULL) == 0);
rate = vtest_ns.mid;
result = flip_and_measure(data, output, pipe, rate, TEST_DURATION_NS);
- igt_assert_f(result > 75,
- "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on threshold not reached, result was %u%%\n",
- ((data->range.max + data->range.min) / 2), rate, result);
+ igt_assert_f(vrr ? (result > 75) : (result < 10),
+ "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR %s threshold %s, result was %u%%\n",
+ ((data->range.max + data->range.min) / 2), rate,
+ vrr ? "on" : "off", vrr ? "not reached" : "exceeded", result);
}
static void test_cleanup(data_t *data, enum pipe pipe, igt_output_t *output)
{
- igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, false);
+ if (vrr_capable(output))
+ igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, false);
+
igt_plane_set_fb(data->primary, NULL);
igt_output_set_pipe(output, PIPE_NONE);
igt_output_override_mode(output, NULL);
@@ -547,10 +559,16 @@ static void test_cleanup(data_t *data, enum pipe pipe, igt_output_t *output)
static bool output_constraint(data_t *data, igt_output_t *output, uint32_t flags)
{
- if ((flags & TEST_SEAMLESS_VRR) &&
+ if ((flags & (TEST_SEAMLESS_VRR | TEST_SEAMLESS_DRRS)) &&
output->config.connector->connector_type != DRM_MODE_CONNECTOR_eDP)
return false;
+ if ((flags & TEST_SEAMLESS_DRRS) &&
+ !intel_output_has_drrs(data->drm_fd, output)) {
+ igt_info("Selected panel won't support DRRS.\n");
+ return false;
+ }
+
/* Reset output */
igt_display_reset(&data->display);
@@ -570,7 +588,7 @@ static bool output_constraint(data_t *data, igt_output_t *output, uint32_t flags
igt_output_override_mode(output, &data->switch_modes[HIGH_RR_MODE]);
/* Search for a low refresh rate mode. */
- if (!(flags & TEST_SEAMLESS_VRR))
+ if (!(flags & (TEST_SEAMLESS_VRR | TEST_SEAMLESS_DRRS)))
return true;
data->switch_modes[LOW_RR_MODE] = low_rr_mode_with_same_res(output, data->range.min);
@@ -587,6 +605,9 @@ static bool config_constraint(data_t *data, igt_output_t *output, uint32_t flags
if (!has_vrr(output))
return false;
+ if (flags & TEST_SEAMLESS_DRRS)
+ goto out;
+
/* For Negative tests, panel should be non-vrr. */
if ((flags & TEST_NEGATIVE) && vrr_capable(output))
return false;
@@ -594,6 +615,7 @@ static bool config_constraint(data_t *data, igt_output_t *output, uint32_t flags
if ((flags & ~TEST_NEGATIVE) && !vrr_capable(output))
return false;
+out:
if (!output_constraint(data, output, flags))
return false;
@@ -670,10 +692,17 @@ igt_main
igt_subtest_with_dynamic("negative-basic")
run_vrr_test(&data, test_basic, TEST_NEGATIVE);
- igt_describe("Test to switch RR seamlessly without modeset.");
- igt_subtest_with_dynamic("seamless-rr-switch-vrr"){
- igt_require_intel(data.drm_fd);
- run_vrr_test(&data, test_seamless_rr_basic, TEST_SEAMLESS_VRR);
+ igt_subtest_group {
+ igt_fixture
+ igt_require_intel(data.drm_fd);
+
+ igt_describe("Test to switch RR seamlessly without modeset.");
+ igt_subtest_with_dynamic("seamless-rr-switch-vrr")
+ run_vrr_test(&data, test_seamless_rr_basic, TEST_SEAMLESS_VRR);
+
+ igt_describe("Test to switch RR seamlessly without modeset.");
+ igt_subtest_with_dynamic("seamless-rr-switch-drrs")
+ run_vrr_test(&data, test_seamless_rr_basic, TEST_SEAMLESS_DRRS);
}
igt_fixture {
--
2.40.0
More information about the igt-dev
mailing list