[igt-dev] [PATCH v2 5/8] tests/kms_vrr: Change the pattern displayed in the test
Modem, Bhanuprakash
bhanuprakash.modem at intel.com
Mon Dec 18 04:36:59 UTC 2023
On 16-11-2023 01:55 pm, Modem, Bhanuprakash wrote:
>
> On Tue-24-10-2023 02:26 am, Sean Paul wrote:
>> From: Sean Paul <seanpaul at chromium.org>
>>
>> Upgrade the tiny box in the top left corner to some vertical color
>> bars with horizontal grey and white bars at the bottom.
>>
>> Cc: Mark Yacoub <markyacoub at chromium.org>
>> Cc: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
>> Signed-off-by: Sean Paul <seanpaul at chromium.org>
>>
>> Changes in v2 (Bhanu):
>> - Removed hardcoded bar heights
>> - Made number of vertical bars configurable
>> - Fill in the entire screen horizontally
>> ---
>> tests/kms_vrr.c | 45 +++++++++++++++++++++++++++++++++++++++++----
>> 1 file changed, 41 insertions(+), 4 deletions(-)
>>
>> diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c
>> index af61c312e..34d75d648 100644
>> --- a/tests/kms_vrr.c
>> +++ b/tests/kms_vrr.c
>> @@ -232,11 +232,31 @@ static void set_vrr_on_pipe(data_t *data, enum
>> pipe pipe, bool enabled)
>> igt_display_commit2(&data->display, COMMIT_ATOMIC);
>> }
>> +static void paint_bar(cairo_t *cr, unsigned int x, unsigned int y,
>> + unsigned int w, unsigned int h,
>> + unsigned int bar, unsigned int num_bars,
>> + float start_r, float start_g, float start_b,
>> + float end_r, float end_g, float end_b)
>> +{
>> + float progress = (float)bar / (float)num_bars;
>> + float color[] = {
>> + start_r + progress * (end_r - start_r),
>> + start_g + progress * (end_g - start_g),
>> + start_b + progress * (end_b - start_b)
>> + };
>> + igt_paint_color(cr, x, y, w, h,
>> + color[0] > 0 ? color[0] : 0.0,
>> + color[1] > 0 ? color[1] : 0.0,
>> + color[2] > 0 ? color[2] : 0.0);
>> +}
>> +
>> /* Prepare the display for testing on the given pipe. */
>> static void prepare_test(data_t *data, igt_output_t *output, enum
>> pipe pipe)
>> {
>> + static const unsigned int num_bars = 256;
>
> Why static?
>
>> drmModeModeInfo mode;
>> cairo_t *cr;
>> + int bar_width, bar_height, bar_remaining, horizontal_bar_height;
>> /* Reset output */
>> igt_display_reset(&data->display);
>> @@ -279,11 +299,28 @@ static void prepare_test(data_t *data,
>> igt_output_t *output, enum pipe pipe)
>> DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR,
>> 0.50, 0.50, 0.50, &data->fb[1]);
>> + bar_width = mode.hdisplay / num_bars;
>> + horizontal_bar_height = mode.vdisplay / 8 > + bar_height =
>> mode.vdisplay - horizontal_bar_height * 2;
>> + bar_remaining = mode.hdisplay % bar_width;
>> cr = igt_get_cairo_ctx(data->drm_fd, &data->fb[0]);
>> -
>> - igt_paint_color(cr, 0, 0, mode.hdisplay / 10, mode.vdisplay / 10,
>> - 1.00, 0.00, 0.00);
>> -
>> + for (int j = 0; j < num_bars; ++j) {
>> + unsigned int width = bar_width;
>> + if (j == num_bars - 1)
>> + width += bar_remaining;
>> +
>> + /* Red->Green->Blue gradient */
>> + if (j < num_bars / 2)
>> + paint_bar(cr, j * bar_width, 0, width, bar_height,
>> + j, num_bars / 2,
>> + 1.0, 0.0, 0.0, 0.0, 1.0, 0.0);
>> + else
>> + paint_bar(cr, j * bar_width, 0, width, bar_height,
>> + j - num_bars / 2, num_bars / 2,
>> + 0.0, 1.0, 0.0, 0.0, 0.0, 1.0);
>> + }
>
> As per the commit message, grey bar is missing here.
>
> igt_paint_color(cr, 0, bar_height,
> mode.hdisplay, horizontal_bar_height, 0.5, 0.5, 0.5);
Got it, As we already created a gray framebuffer & painting the patters
on it, no need to paint the gray bar again.
Reviewed-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
- Bhanu
>
>> + igt_paint_color(cr, 0, mode.vdisplay - horizontal_bar_height,
> -------------------------------^
> Should be (bar_height + horizontal_bar_height), right?
>
> - Bhanu
>
>> + mode.hdisplay, horizontal_bar_height, 1.00, 1.00, 1.00);
>> igt_put_cairo_ctx(cr);
>> /* Take care of any required modesetting before the test begins. */
More information about the igt-dev
mailing list