[PATCH i-g-t 1/3] tests/i915/kms_big_fb: Add Cairo fallback path for test image creation
Ville Syrjälä
ville.syrjala at linux.intel.com
Thu Dec 21 08:20:58 UTC 2023
On Wed, Dec 20, 2023 at 09:59:38PM +0200, Juha-Pekka Heikkila wrote:
> If for some reason rendercopy cannot be used do fallback with
> rendering everything is system memory on cairo surface and move
> test images from cairo surface to framebuffers
>
> Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila at gmail.com>
> ---
> tests/intel/kms_big_fb.c | 166 +++++++++++++++++++++++++++++++--------
> 1 file changed, 134 insertions(+), 32 deletions(-)
>
> diff --git a/tests/intel/kms_big_fb.c b/tests/intel/kms_big_fb.c
> index 3eb43515a..768dac0d2 100644
> --- a/tests/intel/kms_big_fb.c
> +++ b/tests/intel/kms_big_fb.c
> @@ -181,6 +181,8 @@ typedef struct {
> int hw_stride;
> int max_hw_fb_width;
> double planeclearrgb[3];
> + cairo_surface_t *big_surface;
> + cairo_surface_t *normal_surface;
> } data_t;
>
> static struct intel_buf *init_buf(data_t *data,
> @@ -220,6 +222,22 @@ static void fini_buf(struct intel_buf *buf)
> intel_buf_destroy(buf);
> }
>
> +static void copy_pattern_cairo(data_t *data,
> + cairo_surface_t *dst, int dx, int dy,
> + cairo_surface_t *src, int sx, int sy,
> + int w, int h)
> +{
> + cairo_t *cr;
> +
> + cr = cairo_create(dst);
> + cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
> + cairo_rectangle(cr, dx, dy, w, h);
> + cairo_set_source_surface(cr, src, dx-sx, dy-sy);
Pretty sure I tried rendering the thing with cairo and that introduced
some slight variation in the image depending on whether we're rendering
into the start of the small fb or somewhere in the middle of the big fb.
Hmm, but perhaps that was just when I tried to render the pattern there,
a straight copy might work I guess...
> +
> + cairo_fill(cr);
> + cairo_destroy(cr);
> +}
> +
> static void copy_pattern(data_t *data,
> struct igt_fb *dst_fb, int dx, int dy,
> struct igt_fb *src_fb, int sx, int sy,
> @@ -268,6 +286,7 @@ static void setup_fb(data_t *data, struct igt_fb *newfb, uint32_t width,
> {
> struct drm_mode_fb_cmd2 f = {0};
> struct igt_fb col_fb;
> + cairo_t *cr;
>
> newfb->strides[0] = stride;
> igt_create_bo_for_fb(data->drm_fd, width, height, format, modifier,
> @@ -289,25 +308,39 @@ static void setup_fb(data_t *data, struct igt_fb *newfb, uint32_t width,
>
> if (data->planeclearrgb[0] != 0.0 || data->planeclearrgb[1] != 0.0 ||
> data->planeclearrgb[2] != 0.0) {
> - igt_create_color_fb(data->drm_fd, 512, 512,
> - newfb->drm_format, newfb->modifier,
> - data->planeclearrgb[0],
> - data->planeclearrgb[1],
> - data->planeclearrgb[2],
> - &col_fb);
> -
> - for (int y = 0; y < newfb->height; y += 512) {
> - for (int x = 0; x < newfb->width; x += 512) {
> - copy_pattern(data, newfb, x, y,
> - &col_fb, 0, 0,
> - 512, 512);
> + if (data->render_copy) {
> + igt_create_color_fb(data->drm_fd, 512, 512,
> + newfb->drm_format, newfb->modifier,
> + data->planeclearrgb[0],
> + data->planeclearrgb[1],
> + data->planeclearrgb[2],
> + &col_fb);
> +
> + for (int y = 0; y < newfb->height; y += 512) {
> + for (int x = 0; x < newfb->width; x += 512) {
> + copy_pattern(data, newfb, x, y,
> + &col_fb, 0, 0,
> + 512, 512);
> + }
> }
> + igt_remove_fb(data->drm_fd, &col_fb);
> + igt_assert(drmIoctl(data->drm_fd, DRM_IOCTL_MODE_ADDFB2, &f) == 0);
> + newfb->fb_id = f.fb_id;
> + } else {
> + igt_assert(drmIoctl(data->drm_fd, DRM_IOCTL_MODE_ADDFB2, &f) == 0);
> + newfb->fb_id = f.fb_id;
> +
> + cr = igt_get_cairo_ctx(data->drm_fd, newfb);
> + igt_paint_color(cr, 0, 0, newfb->width, newfb->height,
> + data->planeclearrgb[0],
> + data->planeclearrgb[1],
> + data->planeclearrgb[2]);
> + igt_put_cairo_ctx(cr);
> }
> - igt_remove_fb(data->drm_fd, &col_fb);
> + } else {
> + igt_assert(drmIoctl(data->drm_fd, DRM_IOCTL_MODE_ADDFB2, &f) == 0);
> + newfb->fb_id = f.fb_id;
> }
> -
> - igt_assert(drmIoctl(data->drm_fd, DRM_IOCTL_MODE_ADDFB2, &f) == 0);
> - newfb->fb_id = f.fb_id;
> }
>
> static void generate_pattern(data_t *data,
> @@ -315,22 +348,53 @@ static void generate_pattern(data_t *data,
> int w, int h)
> {
> struct igt_fb pat_fb;
> + cairo_surface_t *tempsurface;
> + cairo_t *cr;
>
> - igt_create_pattern_fb(data->drm_fd, w, h,
> - data->format, data->modifier,
> - &pat_fb);
> -
> - for (int y = 0; y < fb->height; y += h) {
> - for (int x = 0; x < fb->width; x += w) {
> - copy_pattern(data, fb, x, y,
> - &pat_fb, 0, 0,
> - pat_fb.width, pat_fb.height);
> - w++;
> - h++;
> + if (data->render_copy) {
> + igt_create_pattern_fb(data->drm_fd, w, h,
> + data->format, data->modifier,
> + &pat_fb);
> +
> + for (int y = 0; y < fb->height; y += h) {
> + for (int x = 0; x < fb->width; x += w) {
> + copy_pattern(data, fb, x, y,
> + &pat_fb, 0, 0,
> + pat_fb.width, pat_fb.height);
> + w++;
> + h++;
> + }
> }
> - }
> + igt_remove_fb(data->drm_fd, &pat_fb);
> + } else {
> + tempsurface = cairo_image_surface_create(CAIRO_FORMAT_RGB24, w, h);
> +
> + cr = cairo_create(tempsurface);
> + cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
> + igt_paint_test_pattern(cr, w, h);
> + cairo_destroy(cr);
> +
> + for (int y = 0; y < fb->height; y += h) {
> + for (int x = 0; x < fb->width; x += w) {
> + copy_pattern_cairo(data, data->big_surface, x, y,
> + tempsurface, 0, 0,
> + w, h);
> + w++;
> + h++;
> + }
> + }
> + cairo_surface_destroy(tempsurface);
>
> - igt_remove_fb(data->drm_fd, &pat_fb);
> + /*
> + * big fb surface to display
> + */
> + cr = igt_get_cairo_ctx(data->drm_fd, fb);
> + cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
> + cairo_set_source_surface(cr, data->big_surface, 0, 0);
> + cairo_rectangle(cr, 0, 0, fb->width, fb->height);
> + cairo_fill(cr);
> + igt_put_cairo_ctx(cr);
> + }
> }
>
> static bool size_ok(data_t *data, uint64_t size)
> @@ -404,6 +468,13 @@ static void prep_fb(data_t *data)
> igt_debug("using stride length %d\n", data->hw_stride);
> }
>
> + if (!data->render_copy) {
> + igt_info("Using Cairo for rendering big framebuffer\n");
> + data->big_surface = cairo_image_surface_create(CAIRO_FORMAT_RGB24,
> + data->big_fb_width,
> + data->big_fb_height);
> + }
> +
> generate_pattern(data, &data->big_fb, 640, 480);
> }
>
> @@ -437,6 +508,7 @@ static void unset_lut(data_t *data)
>
> static bool test_plane(data_t *data)
> {
> + cairo_t *cr;
> igt_plane_t *plane = data->plane;
> struct igt_fb *small_fb = &data->small_fb;
> struct igt_fb *big_fb = &data->big_fb;
> @@ -507,9 +579,23 @@ static bool test_plane(data_t *data)
> * rendering pipeline introduces slight differences into
> * the result if we try that, and so the crc will not match.
> */
> - copy_pattern(data, small_fb, 0, 0, big_fb, x, y,
> - small_fb->width, small_fb->height);
> -
> + if (data->big_surface == NULL) {
> + copy_pattern(data, small_fb, 0, 0, big_fb, x, y,
> + small_fb->width, small_fb->height);
> + } else {
> + copy_pattern_cairo(data, data->normal_surface, 0, 0,
> + data->big_surface, x, y,
> + small_fb->width, small_fb->height);
> + /*
> + * small fb surface to display
> + */
> + cr = igt_get_cairo_ctx(data->drm_fd, small_fb);
> + cairo_set_operator(cr, CAIRO_OPERATOR_SOURCE);
> + cairo_set_source_surface(cr, data->normal_surface, 0, 0);
> + cairo_rectangle(cr, 0, 0, small_fb->width, small_fb->height);
> + cairo_fill(cr);
> + igt_put_cairo_ctx(cr);
I dislike having to spread the details around like this.
Can we abstract things somehow better that we just call
copy_pattern() and it knows whether to use the
fb+rendercopy or go via cairo?
> + }
> igt_display_commit2(&data->display, data->display.is_atomic ?
> COMMIT_ATOMIC : COMMIT_UNIVERSAL);
> igt_pipe_crc_start(data->pipe_crc);
> @@ -563,6 +649,10 @@ static bool test_pipe(data_t *data)
> igt_create_fb(data->drm_fd, width, height,
> data->format, data->modifier, &data->small_fb);
>
> + if (!data->render_copy)
> + data->normal_surface = cairo_image_surface_create(CAIRO_FORMAT_RGB24,
> + width, height);
> +
> igt_output_set_pipe(data->output, data->pipe);
>
> primary = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
> @@ -622,6 +712,13 @@ max_hw_stride_async_flip_test(data_t *data)
> igt_info("Using (pipe %s + %s) to run the subtest.\n",
> kmstest_pipe_name(data->pipe), igt_output_name(data->output));
>
> + if (!data->render_copy && data->big_surface == NULL) {
> + igt_info("Using Cairo for rendering big framebuffer\n");
> + data->big_surface = cairo_image_surface_create(CAIRO_FORMAT_RGB24,
> + data->big_fb_width,
> + data->big_fb_height);
> + }
> +
> igt_output_set_pipe(data->output, data->pipe);
>
> primary = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
> @@ -939,6 +1036,7 @@ static void test_cleanup(data_t *data)
> igt_remove_fb(data->drm_fd, &data->big_fb_flip[0]);
> igt_remove_fb(data->drm_fd, &data->big_fb_flip[1]);
> igt_remove_fb(data->drm_fd, &data->small_fb);
> + cairo_surface_destroy(data->normal_surface);
>
> data->output = NULL;
> }
> @@ -1158,6 +1256,10 @@ igt_main
> igt_fixture {
> igt_display_fini(&data.display);
> buf_ops_destroy(data.bops);
> +
> + if (data.big_surface != NULL)
> + cairo_surface_destroy(data.big_surface);
> +
> drm_close_driver(data.drm_fd);
> }
> }
> --
> 2.25.1
--
Ville Syrjälä
Intel
More information about the igt-dev
mailing list